Re: [PATCH 4/4] serial: 8250: Support rs485 bus termination GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 06, 2020 at 08:29:43AM +0200, Lukas Wunner wrote:
> On Tue, May 05, 2020 at 07:10:35PM +0300, Andy Shevchenko wrote:
> > On Tue, May 05, 2020 at 04:42:04PM +0200, Lukas Wunner wrote:

...

> > > +		devm_gpiod_put(dev, port->rs485_term_gpio);
> > 
> > > +	port->rs485_term_gpio = devm_gpiod_get_optional(dev, "rs485-term",
> > 
> > Using devm_*() in uart_get_rs485_mode() seems not right.
> > Why do you need this?
> 
> uart_get_rs485_mode() is called from a driver's ->probe() hook and we
> do not have a corresponding function that is called from a ->remove()
> hook where we'd be able to relinquish rs485 resources we've acquired
> on probe.
> 
> Of course I could add that but it would be more heavy-weight compared
> to simply using devm_*().  Do you disagree?
> 
> devm_gpiod_put() isn't strictly necessary here.  It is only necessary
> if one of the drivers would invoke uart_get_rs485_mode() multiple
> times, which none of them does AFAICS.  It's just a safety measure.
> I can drop it if that is preferred.

I think putting and re-requesting here is also racy. Somebody can request the
very same GPIO in between (for example crazy user space tool).

Setting the same value many times won't hurt.

> > > +		GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT);
> > 
> > Parameter has a specific macro GPIOD_OUT_HIGH.
> 
> Good point.  It's also occurred to me now that reading the GPIO's
> value after changing its direction to output is nonsense.  If anything
> it ought to be read *before* changing the direction to output.

It's not a complete nonsense, depends what you actually want to achieve here.

> That would make sense in case the board has a pullup or pulldown on
> the Termination Enable pin.  In other cases the pin may just float
> and the value will be unpredictable.  However if I do not read the
> pin, I'd have to choose either high or low as initial state.  Hm.
> Let me check back with our hardware engineers today and see what they
> recommend.

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux