[PATCH 1/4] ARM: dts: stm32: Add drm panel ili9341 support for stm32f429-disco board

[dillon.minfei@xxxxxxxxx]

From: dillon min <dillon.minfei@xxxxxxxxx>

1, add stm32f429-disco ltdc pins mux config
2, add ltdc nodes pinned with ili9341
3, add spi5 node

Signed-off-by: dillon min <dillon.minfei@xxxxxxxxx>
---
 arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32f429-disco.dts  | 40 ++++++++++++++++++++
 2 files changed, 107 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 392fa14..0eb107f 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -316,6 +316,73 @@
 				};
 			};
 
+			ltdc_pins_f429_disco: ltdc-1 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 6,  AF14)>,
+						/* LCD_HSYNC */
+						 <STM32_PINMUX('A', 4,  AF14)>,
+						 /* LCD_VSYNC */
+						 <STM32_PINMUX('G', 7,  AF14)>,
+						 /* LCD_CLK */
+						 <STM32_PINMUX('C', 10, AF14)>,
+						 /* LCD_R2 */
+						 <STM32_PINMUX('B', 0,  AF9)>,
+						 /* LCD_R3 */
+						 <STM32_PINMUX('A', 11, AF14)>,
+						 /* LCD_R4 */
+						 <STM32_PINMUX('A', 12, AF14)>,
+						 /* LCD_R5 */
+						 <STM32_PINMUX('B', 1,  AF9)>,
+						 /* LCD_R6*/
+						 <STM32_PINMUX('G', 6,  AF14)>,
+						 /* LCD_R7 */
+						 <STM32_PINMUX('A', 6,  AF14)>,
+						 /* LCD_G2 */
+						 <STM32_PINMUX('G', 10, AF9)>,
+						 /* LCD_G3 */
+						 <STM32_PINMUX('B', 10, AF14)>,
+						 /* LCD_G4 */
+						 <STM32_PINMUX('D', 6,  AF14)>,
+						 /* LCD_B2 */
+						 <STM32_PINMUX('G', 11, AF14)>,
+						 /* LCD_B3*/
+						 <STM32_PINMUX('B', 11, AF14)>,
+						 /* LCD_G5 */
+						 <STM32_PINMUX('C', 7,  AF14)>,
+						 /* LCD_G6 */
+						 <STM32_PINMUX('D', 3,  AF14)>,
+						 /* LCD_G7 */
+						 <STM32_PINMUX('G', 12, AF9)>,
+						 /* LCD_B4 */
+						 <STM32_PINMUX('A', 3,  AF14)>,
+						 /* LCD_B5 */
+						 <STM32_PINMUX('B', 8,  AF14)>,
+						 /* LCD_B6 */
+						 <STM32_PINMUX('B', 9,  AF14)>,
+						 /* LCD_B7 */
+						 <STM32_PINMUX('F', 10, AF14)>;
+						 /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+
+			spi5_pins: spi5-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 7, AF5)>,
+						/* SPI5_CLK */
+						 <STM32_PINMUX('F', 9, AF5)>;
+						/* SPI5_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('F', 8, AF5)>;
+						/* SPI5_MISO */
+					bias-disable;
+				};
+			};
+
 			dcmi_pins: dcmi-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 30c0f67..3aadddb 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -49,6 +49,8 @@
 #include "stm32f429.dtsi"
 #include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32F429i-DISCO board";
@@ -127,3 +129,41 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins_f429_disco>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&spi5 {
+	status = "okay";
+	pinctrl-0 = <&spi5_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpioc 2 GPIO_ACTIVE_LOW>;
+	dmas = <&dma2 3 2 0x400 0x0>,
+	       <&dma2 4 2 0x400 0x0>;
+	dma-names = "rx", "tx";
+	display: display@0{
+		/* Connect panel-ilitek-9341 to ltdc */
+		compatible = "stm32f429-disco,ltdc-panel", "ilitek,ili9341";
+		reg = <0>;
+		spi-3wire;
+		spi-max-frequency = <10000000>;
+		dc-gpios = <&gpiod 13 0>;
+		port {
+			panel_in_rgb: endpoint {
+			remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+};
+
-- 
2.7.4