On Tue, May 05, 2020 at 03:00:53PM +0000, Benjamin GAIGNARD wrote:
>
>
> On 5/5/20 4:40 PM, Greg KH wrote:
> > On Tue, May 05, 2020 at 09:33:05AM +0200, Benjamin Gaignard wrote:
> >> The goal of these helpers are to offer an interface for the
> >> hardware blocks controlling bus accesses rights.
> >>
> >> Bus firewall controllers are typically used to control if a
> >> hardware block can perform read or write operations on bus.
> >>
> >> Smarter firewall controllers could be able to define accesses
> >> rights per hardware blocks to control where they can read
> >> or write.
> >>
> >> Firewall controller configurations are provided in device node,
> >> parsed by the helpers and send to the driver to apply them.
> >> Each controller may need different number and type of inputs
> >> to configure the firewall so device-tree properties size have to
> >> be define by using "#firewall-cells".
> >> Firewall configurations properties have to be named "firewall-X"
> >> on device node.
> >> "firewall-names" keyword can also be used to give a name to
> >> a specific configuration.
> >>
> >> Example of device-tree:
> >> ctrl0: firewall@0 {
> >> #firewall-cells = <2>;
> >> };
> >>
> >> foo: foo@0 {
> >> firewall-names = "default", "setting1";
> >> firewall-0 = <&ctrl0 1 2>;
> >> firewall-1 = <&ctrl0 3 4>;
> >> };
> >>
> >> Configurations could be applied with functions like
> >> firewall_set_config_by_index() or firewall_set_config_by_name().
> >>
> >> firewall_set_default_config() function will apply the
> >> configuration named "default" (if existing) or the configuration
> >> with index 0 (i.e. firewall-0).
> >>
> >> Drivers could register/unregister themselves be calling
> >> firewall_register/firewall_unregister functions.
> >>
> >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> >> ---
> >> drivers/bus/Kconfig | 2 +
> >> drivers/bus/Makefile | 2 +
> >> drivers/bus/stm32/Kconfig | 3 +
> >> drivers/bus/stm32/Makefile | 1 +
> >> drivers/bus/stm32/firewall.c | 266 +++++++++++++++++++++++++++++++++++++++++++
> >> drivers/bus/stm32/firewall.h | 75 ++++++++++++
> >> 6 files changed, 349 insertions(+)
> >> create mode 100644 drivers/bus/stm32/Kconfig
> >> create mode 100644 drivers/bus/stm32/Makefile
> >> create mode 100644 drivers/bus/stm32/firewall.c
> >> create mode 100644 drivers/bus/stm32/firewall.h
> >>
> >> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> >> index 6d4e4497b59b..843b356322d9 100644
> >> --- a/drivers/bus/Kconfig
> >> +++ b/drivers/bus/Kconfig
> >> @@ -203,4 +203,6 @@ config DA8XX_MSTPRI
> >> source "drivers/bus/fsl-mc/Kconfig"
> >> source "drivers/bus/mhi/Kconfig"
> >>
> >> +source "drivers/bus/stm32/Kconfig"
> >> +
> >> endmenu
> >> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> >> index 05f32cd694a4..5e0e34b10235 100644
> >> --- a/drivers/bus/Makefile
> >> +++ b/drivers/bus/Makefile
> >> @@ -37,3 +37,5 @@ obj-$(CONFIG_DA8XX_MSTPRI) += da8xx-mstpri.o
> >>
> >> # MHI
> >> obj-$(CONFIG_MHI_BUS) += mhi/
> >> +
> >> +obj-$(CONFIG_MACH_STM32MP157) += stm32/
> >> \ No newline at end of file
> >> diff --git a/drivers/bus/stm32/Kconfig b/drivers/bus/stm32/Kconfig
> >> new file mode 100644
> >> index 000000000000..57221e833e2d
> >> --- /dev/null
> >> +++ b/drivers/bus/stm32/Kconfig
> >> @@ -0,0 +1,3 @@
> >> +config FIREWALL_CONTROLLERS
> >> + bool "Support of bus firewall controllers"
> >> + depends on OF
> >> diff --git a/drivers/bus/stm32/Makefile b/drivers/bus/stm32/Makefile
> >> new file mode 100644
> >> index 000000000000..eb6b978d6450
> >> --- /dev/null
> >> +++ b/drivers/bus/stm32/Makefile
> >> @@ -0,0 +1 @@
> >> +obj-$(CONFIG_FIREWALL_CONTROLLERS) += firewall.o
> >> diff --git a/drivers/bus/stm32/firewall.c b/drivers/bus/stm32/firewall.c
> >> new file mode 100644
> >> index 000000000000..95f716cf926f
> >> --- /dev/null
> >> +++ b/drivers/bus/stm32/firewall.c
> >> @@ -0,0 +1,266 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Copyright (C) STMicroelectronics 2020 - All Rights Reserved
> >> + * Author: Benjamin Gaignard <benjamin.gaignard@xxxxxx> for STMicroelectronics.
> >> + */
> >> +
> >> +#include <linux/device.h>
> >> +#include <linux/err.h>
> >> +#include <linux/init.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/list.h>
> >> +#include <linux/of.h>
> >> +#include <linux/slab.h>
> >> +
> >> +#include "firewall.h"
> >> +
> >> +/* Mutex taken to protect firewall_list */
> >> +static DEFINE_MUTEX(firewall_list_mutex);
> >> +
> >> +/* Global list of firewall control devices */
> >> +static LIST_HEAD(firewall_list);
> > Why is that needed? Why can't you just walk the list of devices on this
> > "bus/class" if you really wanted to?
> >
> > Along those lines, why is this going around the driver model and
> > ignoring it? Shouldn't this be a bus and you have devices attached to
> > it of the specific type?
> This part of the series is only a a set of common functions and bindings
> that I plan to reuse for futur STM32 SoCs.
> The 'real' bus implementation is in patch 4.
Then you don't need a "fake" list of devices in this patch, do you? Why
not just create the real bus and then have people use it, otherwise this
sequence of review is really complicated as you must be deleting this
code. Right? :)
Do it correct the first time please.
thanks,
greg k-h
