Re: [PATCH v2 4/4] ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> Adds additional nodes to support GPLDO1-6 and VBUS regulators which
> are now supported in the bcm590xx regulator driver.
> 
> Signed-off-by: Matt Porter <mporter@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/bcm59056.dtsi | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)

I'm not going to apply this with the rest of the set.  It will have to
go in via your normal arch/arm route.

> diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
> index dfadaaa..066adfb 100644
> --- a/arch/arm/boot/dts/bcm59056.dtsi
> +++ b/arch/arm/boot/dts/bcm59056.dtsi
> @@ -70,5 +70,26 @@
>  
>  		vsr_reg: vsr {
>  		};
> +
> +		gpldo1_reg: gpldo1 {
> +		};

What do these empty nodes do in any case?

Don't you at least need a status property in there or something?

> +		gpldo2_reg: gpldo2 {
> +		};
> +
> +		gpldo3_reg: gpldo3 {
> +		};
> +
> +		gpldo4_reg: gpldo4 {
> +		};
> +
> +		gpldo5_reg: gpldo5 {
> +		};
> +
> +		gpldo6_reg: gpldo6 {
> +		};
> +
> +		vbus_reg: vbus {
> +		};
>  	};
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux