On 05/05/2020 07:05, Rob Herring wrote:
On Fri, 1 May 2020 23:50:05 +0300, Grygorii Strashko wrote:
Document device tree bindings for TI AM654/J721E SoC The Common Platform
Time Sync (CPTS) module. The CPTS module is used to facilitate host control
of time sync operations. Main features of CPTS module are:
- selection of multiple external clock sources
- 64-bit timestamp mode in ns with ppm and nudge adjustment.
- control of time sync events via interrupt or polling
- hardware timestamp of ext. events (HWx_TS_PUSH)
- periodic generator function outputs (TS_GENFx)
- PPS in combination with timesync router
- Depending on integration it enables compliance with the IEEE 1588-2008
standard for a precision clock synchronization protocol, Ethernet Enhanced
Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
Measurement (PTM).
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
.../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 7 +
.../bindings/net/ti,k3-am654-cpts.yaml | 152 ++++++++++++++++++
2 files changed, 159 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml: $id: relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml#
Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.6/dist-packages/dtschema/schemas/net/ti,am654-cpts.yaml'
Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.example.dts] Error 255
make[1]: *** Waiting for unfinished jobs....
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1281460
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
I've sent fix for this.
--
Best regards,
grygorii
