Re: [PATCH v2 09/10] ARM: dts: r8a7742-iwg21m: Add iWave RZ/G1H Qseven SOM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

On Mon, May 4, 2020 at 4:20 PM Lad, Prabhakar
<prabhakar.csengg@xxxxxxxxx> wrote:
> On Mon, May 4, 2020 at 2:01 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> > On Sun, May 3, 2020 at 11:48 PM Lad Prabhakar
> > <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > > Add support for iWave RZ/G1H Qseven System On Module.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>

> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
> > > @@ -0,0 +1,53 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Device Tree Source for the iWave RZ/G1H Qseven SOM
> > > + *
> > > + * Copyright (C) 2020 Renesas Electronics Corp.
> > > + */
> > > +
> > > +#include "r8a7742.dtsi"
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +
> > > +/ {
> > > +       compatible = "iwave,g21m", "renesas,r8a7742";
> > > +
> > > +       memory@40000000 {
> > > +               device_type = "memory";
> > > +               reg = <0 0x40000000 0 0x40000000>;
> > > +       };
> > > +
> > > +       memory@200000000 {
> > > +               device_type = "memory";
> > > +               reg = <2 0x00000000 0 0x20000000>;
> >
> > According to the schematics, the second bank is also 1 GiB, so the
> > reg length should be 0x40000000.
> >
> Agreed will fix that.

Thanks for the confirmation.  I can fix that while applying.

> > > +       };
> >
> > > +&pfc {
> > > +       mmc1_pins: mmc1 {
> > > +               groups = "mmc1_data4", "mmc1_ctrl";
> > > +               function = "mmc1";
> > > +       };
> > > +};
> > > +
> > > +&mmcif1 {
> > > +       pinctrl-0 = <&mmc1_pins>;
> > > +       pinctrl-names = "default";
> > > +
> > > +       vmmc-supply = <&reg_3p3v>;
> > > +       bus-width = <4>;
> > > +       non-removable;
> > > +       status = "okay";
> > > +};
> >
> > The eMMC has an 8-bit data path.  Is there any specific reason you use
> > bus-width = <4>, and the "mmc1_data4" pin group?
> >
> MMC1_DATA7 is shared with VI1_CLK, so instead of limiting to only one
> device when using 8-bit just switched to 4bit mode so that both the
> peripherals can be used.

OK.

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v5.8 with the above fixed.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux