Hi Joachim,
On 05/20/2014 08:09 PM, Joachim Eastwood wrote:
> On 20 May 2014 16:25, Florian Vaussard <florian.vaussard@xxxxxxx> wrote:
>> Add the necessary DTS nodes to enable the micro-HDMI output on Parlor
>> board.
>>
>> Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxx>
>> ---
>> arch/arm/boot/dts/omap4-duovero-parlor.dts | 42 ++++++++++++++++++++++++++++++
>> 1 file changed, 42 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
>> index 96f51d8..3b234b8 100644
>> --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
>> +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
>> @@ -15,6 +15,10 @@
>> model = "OMAP4430 Gumstix Duovero on Parlor";
>> compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
>>
>> + aliases {
>> + display0 = &hdmi0;
>> + };
>> +
>> leds {
>> compatible = "gpio-leds";
>> led0 {
>> @@ -35,6 +39,19 @@
>> gpio-key,wakeup;
>> };
>> };
>> +
>> + hdmi0: connector@0 {
>> + compatible = "hdmi-connector";
>> + label = "hdmi";
>> +
>> + type = "d";
>> +
>> + port {
>> + hdmi_connector_in: endpoint {
>> + remote-endpoint = <&hdmi_out>;
>> + };
>> + };
>> + };
>> };
>
> No, HPD (hotplug) pin?
>
> I think Parlor has one and the "hdmi-connector" binding now supports
> it. See Tomi's 3.16/fbdev-omap branch.
>
I will check. Thank you for the heads up.
Regards,
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
