Re: [PATCH 1/2] thermal: qcom: tsens-v0_1: Add support for MSM8939

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for your review. I'll hopefully send a v2 later today.

As for the sensor count, I don't know how many there actually are. I'm
an independent dev and don't have access to any documentation and I'm
solely basing on what I find in downstream, and I think it's 10,
unless mainline expects the _0_4 and _5 to be counted separately.. [1]

I will also make sure to test it again before sending and will give
you the results in the v2 cover letter.

[1] https://github.com/konradybcio/android_kernel_asus_msm8916-1/blob/minimal/drivers/thermal/msm8974-tsens.c#L396


pon., 4 maj 2020 o 08:31 Amit Kucheria <amit.kucheria@xxxxxxxxxx> napisał(a):
>
> On Sat, May 2, 2020 at 2:03 AM Konrad Dybcio <konradybcio@xxxxxxxxx> wrote:
> >
> > Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
> > ---
> >  drivers/thermal/qcom/tsens-v0_1.c | 142 +++++++++++++++++++++++++++++-
> >  drivers/thermal/qcom/tsens.c      |   3 +
> >  drivers/thermal/qcom/tsens.h      |   2 +-
> >  3 files changed, 145 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> > index 959a9371d205c..29b95886273b7 100644
> > --- a/drivers/thermal/qcom/tsens-v0_1.c
> > +++ b/drivers/thermal/qcom/tsens-v0_1.c
> > @@ -48,6 +48,64 @@
> >  #define MSM8916_CAL_SEL_MASK   0xe0000000
> >  #define MSM8916_CAL_SEL_SHIFT  29
> >
> > +/* eeprom layout data for 8939 */
> > +#define MSM8939_BASE0_MASK           0x000000ff
> > +#define MSM8939_BASE1_MASK           0xff000000
> > +#define MSM8939_BASE0_SHIFT
>
> Use 0?
>
> > +#define MSM8939_BASE1_SHIFT          24
> > +
> > +#define MSM8939_S0_P1_MASK         0x000001f8
> > +#define MSM8939_S1_P1_MASK         0x001f8000
> > +#define MSM8939_S2_P1_MASK_0_4     0xf8000000
> > +#define MSM8939_S2_P1_MASK_5       0x00000001
> > +#define MSM8939_S3_P1_MASK         0x00001f80
> > +#define MSM8939_S4_P1_MASK         0x01f80000
> > +#define MSM8939_S5_P1_MASK         0x00003f00
> > +#define MSM8939_S6_P1_MASK         0x03f00000
> > +#define MSM8939_S7_P1_MASK         0x0000003f
> > +#define MSM8939_S8_P1_MASK         0x0003f000
> > +#define MSM8939_S9_P1_MASK         0x07e00000
> > +
> > +#define MSM8939_S0_P2_MASK         0x00007e00
> > +#define MSM8939_S1_P2_MASK         0x07e00000
> > +#define MSM8939_S2_P2_MASK         0x0000007e
> > +#define MSM8939_S3_P2_MASK         0x0007e000
> > +#define MSM8939_S4_P2_MASK         0x7e000000
> > +#define MSM8939_S5_P2_MASK         0x000fc000
> > +#define MSM8939_S6_P2_MASK         0xfc000000
> > +#define MSM8939_S7_P2_MASK         0x00000fc0
> > +#define MSM8939_S8_P2_MASK         0x00fc0000
> > +#define MSM8939_S9_P2_MASK_0_4     0xf8000000
> > +#define MSM8939_S9_P2_MASK_5       0x00002000
> > +
> > +#define MSM8939_CAL_SEL_MASK   0xc0000000
> > +#define MSM8939_CAL_SEL_SHIFT  0
> > +
> > +
>
> Get rid of extra line.
>
> > +#define MSM8939_S0_P1_SHIFT        3
> > +#define MSM8939_S1_P1_SHIFT        15
> > +#define MSM8939_S2_P1_SHIFT_0_4    27
> > +#define MSM8939_S2_P1_SHIFT_5      5
> > +#define MSM8939_S3_P1_SHIFT        7
> > +#define MSM8939_S4_P1_SHIFT        19
> > +#define MSM8939_S5_P1_SHIFT        8
> > +#define MSM8939_S6_P1_SHIFT        20
> > +//yes, 7 is missing in downstream
>
> Use C style comments.
>
> > +#define MSM8939_S8_P1_SHIFT        12
> > +#define MSM8939_S9_P1_SHIFT        21
> > +
> > +#define MSM8939_S0_P2_SHIFT        9
> > +#define MSM8939_S1_P2_SHIFT        21
> > +#define MSM8939_S2_P2_SHIFT        1
> > +#define MSM8939_S3_P2_SHIFT        13
> > +#define MSM8939_S4_P2_SHIFT        25
> > +#define MSM8939_S5_P2_SHIFT        14
> > +#define MSM8939_S6_P2_SHIFT        26
> > +#define MSM8939_S7_P2_SHIFT        6
> > +#define MSM8939_S8_P2_SHIFT        18
> > +#define MSM8939_S9_P2_SHIFT_0_4    27
> > +#define MSM8939_S9_P2_SHIFT_5      8
> > +
> >  /* eeprom layout data for 8974 */
> >  #define BASE1_MASK             0xff
> >  #define S0_P1_MASK             0x3f00
> > @@ -189,6 +247,73 @@ static int calibrate_8916(struct tsens_priv *priv)
> >         return 0;
> >  }
> >
> > +static int calibrate_8939(struct tsens_priv *priv)
> > +{
> > +       int base0 = 0, base1 = 0, i;
> > +       u32 p1[11], p2[11];
> > +       int mode = 0;
> > +       u32 *qfprom_cdata, *qfprom_csel;
> > +
> > +       qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
> > +       if (IS_ERR(qfprom_cdata))
> > +               return PTR_ERR(qfprom_cdata);
> > +
> > +       qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
> > +       if (IS_ERR(qfprom_csel)) {
> > +               kfree(qfprom_cdata);
> > +               return PTR_ERR(qfprom_csel);
> > +       }
> > +
> > +       mode = (qfprom_csel[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
> > +       dev_dbg(priv->dev, "calibration mode is %d\n", mode);
>
> Add an extra line here.
>
> > +       switch (mode) {
> > +       case TWO_PT_CALIB:
> > +               base1 = (qfprom_cdata[1] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
> > +               p2[0] = (qfprom_cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
> > +               p2[1] = (qfprom_cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
> > +               p2[2] = (qfprom_cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
> > +               p2[3] = (qfprom_cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
> > +               p2[4] = (qfprom_cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
> > +               p2[5] = (qfprom_cdata[1] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
> > +               p2[6] = (qfprom_cdata[1] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
> > +               p2[7] = (qfprom_cdata[1] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
> > +               p2[8] = (qfprom_cdata[1] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
> > +               p2[9] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
> > +               p2[10] = (qfprom_cdata[1] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5;
> > +               for (i = 0; i < priv->num_sensors; i++)
> > +                       p2[i] = ((base1 + p2[i]) << 3);
> > +               /* Fall through */
> > +       case ONE_PT_CALIB2:
> > +               base0 = (qfprom_cdata[0] & MSM8939_BASE0_MASK);
> > +               p1[0] = (qfprom_cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
> > +               p1[1] = (qfprom_cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
> > +               p1[2] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
> > +               p1[3] = (qfprom_cdata[0] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5;
> > +               p1[4] = (qfprom_cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
> > +               p1[5] = (qfprom_cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
> > +               p1[6] = (qfprom_cdata[1] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
> > +               p1[7] = (qfprom_cdata[1] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
> > +               //yes, 7 is missing in downstream
>
> Use C comment style. Might this be a bug?
>
> > +               p1[8] = (qfprom_cdata[1] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
> > +               p1[9] = (qfprom_cdata[1] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
> > +               for (i = 0; i < priv->num_sensors; i++)
> > +                       p1[i] = (((base0) + p1[i]) << 3);
> > +               break;
> > +       default:
> > +               for (i = 0; i < priv->num_sensors; i++) {
> > +                       p1[i] = 500;
> > +                       p2[i] = 780;
> > +               }
> > +               break;
> > +       }
> > +
> > +       compute_intercept_slope(priv, p1, p2, mode);
> > +       kfree(qfprom_cdata);
> > +       kfree(qfprom_csel);
> > +
> > +       return 0;
> > +}
> > +
> >  static int calibrate_8974(struct tsens_priv *priv)
> >  {
> >         int base1 = 0, base2 = 0, i;
> > @@ -325,7 +450,7 @@ static int calibrate_8974(struct tsens_priv *priv)
> >         return 0;
> >  }
> >
> > -/* v0.1: 8916, 8974 */
> > +/* v0.1: 8916, 8939, 8974 */
> >
> >  static struct tsens_features tsens_v0_1_feat = {
> >         .ver_major      = VER_0_1,
> > @@ -386,6 +511,21 @@ struct tsens_plat_data data_8916 = {
> >         .fields = tsens_v0_1_regfields,
> >  };
> >
> > +static const struct tsens_ops ops_8939 = {
> > +       .init           = init_common,
> > +       .calibrate      = calibrate_8939,
> > +       .get_temp       = get_temp_common,
> > +};
> > +
> > +struct tsens_plat_data data_8939 = {
> > +       .num_sensors    = 10,
>
> I think 8939 has 11 sensors. Can you confirm?
>
> > +       .ops            = &ops_8939,
> > +       .hw_ids         = (unsigned int []){0, 1, 2, 4, 5, 6, 7, 8, 9 },
>
> And this should be equal to the number of sensors
>
>
> > +
> > +       .feat           = &tsens_v0_1_feat,
> > +       .fields = tsens_v0_1_regfields,
> > +};
> > +
> >  static const struct tsens_ops ops_8974 = {
> >         .init           = init_common,
> >         .calibrate      = calibrate_8974,
> > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> > index 2f77d235cf735..f654057e96ae1 100644
> > --- a/drivers/thermal/qcom/tsens.c
> > +++ b/drivers/thermal/qcom/tsens.c
> > @@ -59,6 +59,9 @@ static const struct of_device_id tsens_table[] = {
> >         {
> >                 .compatible = "qcom,msm8916-tsens",
> >                 .data = &data_8916,
> > +       }, {
> > +               .compatible = "qcom,msm8939-tsens",
> > +               .data = &data_8939,
> >         }, {
> >                 .compatible = "qcom,msm8974-tsens",
> >                 .data = &data_8974,
> > diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> > index 502acf0e68285..403b15546f648 100644
> > --- a/drivers/thermal/qcom/tsens.h
> > +++ b/drivers/thermal/qcom/tsens.h
> > @@ -590,7 +590,7 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data);
> >  extern struct tsens_plat_data data_8960;
> >
> >  /* TSENS v0.1 targets */
> > -extern struct tsens_plat_data data_8916, data_8974;
> > +extern struct tsens_plat_data data_8916, data_8939, data_8974;
> >
> >  /* TSENS v1 targets */
> >  extern struct tsens_plat_data data_tsens_v1, data_8976;
> > --
> > 2.26.1
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux