On Thu, Apr 30, 2020 at 10:24 PM Masami Hiramatsu <masami.hiramatsu@xxxxxxxxxx> wrote: > > Hello, > > Here is the 5th version of the patches to add a devicetree for > Akebi96 board. > > This version removes redundant setting of RGMII, fixes some > parameters for max3420-udc node and add the address to > framebuffer node name. > > The Akebi96 is a certified 96boards which is based on Socionext > UniPhier LD20 SoC. Most of the part is similar to LD20 reference > board, but there are some changes. > > - MAX3421 USB-SPI chip on SPI port3 (for USB gadget port.) > - Simple frame buffer with 1080p fixed resolution. > - I2S port which is connected to aout1b instead of aout1. > - 3 serial ports, only serial3 has CTS/RTS. > - No NAND, only eMMC on the board. > - OP-TEE installed firmware. > > See https://www.96boards.org/product/akebi96/ for details. > > Thank you, > > --- Both applied. > Masami Hiramatsu (2): > dt-bindings: arm: Add Akebi96 board support > arm64: dts: uniphier: Add support for Akebi96 > > > .../bindings/arm/socionext/uniphier.yaml | 1 > arch/arm64/boot/dts/socionext/Makefile | 1 > .../boot/dts/socionext/uniphier-ld20-akebi96.dts | 189 ++++++++++++++++++++ > 3 files changed, 191 insertions(+) > create mode 100644 arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts > > -- > Masami Hiramatsu <masami.hiramatsu@xxxxxxxxxx> > -- Best Regards Masahiro Yamada
