Hi Konrad.
On Fri, May 01, 2020 at 10:48:22PM +0200, Konrad Dybcio wrote:
> This adds support for TMP5P5 NT35596 1080x1920 video
> mode panel that can be found on some Asus Zenfone 2
> Laser (Z00T) devices.
Very well-writen driver. Only a few small things in the following.
Sam
>
> Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
> ---
> drivers/gpu/drm/panel/Kconfig | 9 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-tm5p5-nt35596.c | 366 ++++++++++++++++++++
> 3 files changed, 376 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-tm5p5-nt35596.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index a1723c1b5fbf8..6ff892334ac4b 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -401,6 +401,15 @@ config DRM_PANEL_SONY_ACX565AKM
> Say Y here if you want to enable support for the Sony ACX565AKM
> 800x600 3.5" panel (found on the Nokia N900).
>
> +config DRM_PANEL_TM5P5_NT35596
> + tristate "TM5P5 NT35596 panel"
> + depends on GPIOLIB && OF
> + depends on DRM_MIPI_DSI
> + help
> + Say Y here if you want to enable support for the TMP5P5
> + NT35596 1080x1920 video mode panel as found in some Asus
> + Zenfone 2 Laser Z00T devices.
> +
> config DRM_PANEL_TPO_TD028TTEC1
> tristate "Toppoly (TPO) TD028TTEC1 panel driver"
> depends on OF && SPI
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 96a883cd66305..4fc7e00b18502 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -42,6 +42,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> +obj-$(CONFIG_DRM_PANEL_TM5P5_NT35596) += panel-tm5p5-nt35596.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> diff --git a/drivers/gpu/drm/panel/panel-tm5p5-nt35596.c b/drivers/gpu/drm/panel/panel-tm5p5-nt35596.c
> new file mode 100644
> index 0000000000000..c361ab76812b8
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-tm5p5-nt35596.c
> @@ -0,0 +1,366 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct tm5p5_nt35596 {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + struct regulator_bulk_data supplies[2];
> + struct gpio_desc *reset_gpio;
> + bool prepared;
> +};
> +
> +static inline struct tm5p5_nt35596 *to_tm5p5_nt35596(struct drm_panel *panel)
> +{
> + return container_of(panel, struct tm5p5_nt35596, panel);
> +}
> +
> +#define dsi_generic_write_seq(dsi, seq...) do { \
> + static const u8 d[] = { seq }; \
> + int ret; \
> + ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
> + if (ret < 0) \
> + return ret; \
> + } while (0)
> +
> +#define dsi_dcs_write_seq(dsi, seq...) do { \
> + static const u8 d[] = { seq }; \
> + int ret; \
> + ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
> + if (ret < 0) \
> + return ret; \
> + } while (0)
> +
> +static void tm5p5_nt35596_reset(struct tm5p5_nt35596 *ctx)
> +{
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(1000, 2000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + usleep_range(1000, 2000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(15000, 16000);
> +}
> +
> +static int tm5p5_nt35596_on(struct tm5p5_nt35596 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
Do you have any idea of what happens in the following?
I recall 0xff is explained in a few other drivers for example.
If you get an idea it would be nice with a few headlines.
> +
> + dsi_generic_write_seq(dsi, 0xff, 0x05);
> + dsi_generic_write_seq(dsi, 0xfb, 0x01);
> + dsi_generic_write_seq(dsi, 0xc5, 0x31);
> + dsi_generic_write_seq(dsi, 0xff, 0x04);
> + dsi_generic_write_seq(dsi, 0x01, 0x84);
> + dsi_generic_write_seq(dsi, 0x05, 0x25);
> + dsi_generic_write_seq(dsi, 0x06, 0x01);
> + dsi_generic_write_seq(dsi, 0x07, 0x20);
> + dsi_generic_write_seq(dsi, 0x08, 0x06);
> + dsi_generic_write_seq(dsi, 0x09, 0x08);
> + dsi_generic_write_seq(dsi, 0x0a, 0x10);
> + dsi_generic_write_seq(dsi, 0x0b, 0x10);
> + dsi_generic_write_seq(dsi, 0x0c, 0x10);
> + dsi_generic_write_seq(dsi, 0x0d, 0x14);
> + dsi_generic_write_seq(dsi, 0x0e, 0x14);
> + dsi_generic_write_seq(dsi, 0x0f, 0x14);
> + dsi_generic_write_seq(dsi, 0x10, 0x14);
> + dsi_generic_write_seq(dsi, 0x11, 0x14);
> + dsi_generic_write_seq(dsi, 0x12, 0x14);
> + dsi_generic_write_seq(dsi, 0x17, 0xf3);
> + dsi_generic_write_seq(dsi, 0x18, 0xc0);
> + dsi_generic_write_seq(dsi, 0x19, 0xc0);
> + dsi_generic_write_seq(dsi, 0x1a, 0xc0);
> + dsi_generic_write_seq(dsi, 0x1b, 0xb3);
> + dsi_generic_write_seq(dsi, 0x1c, 0xb3);
> + dsi_generic_write_seq(dsi, 0x1d, 0xb3);
> + dsi_generic_write_seq(dsi, 0x1e, 0xb3);
> + dsi_generic_write_seq(dsi, 0x1f, 0xb3);
> + dsi_generic_write_seq(dsi, 0x20, 0xb3);
> + dsi_generic_write_seq(dsi, 0xfb, 0x01);
> + dsi_generic_write_seq(dsi, 0xff, 0x00);
> + dsi_generic_write_seq(dsi, 0xfb, 0x01);
> + dsi_generic_write_seq(dsi, 0x35, 0x01);
> + dsi_generic_write_seq(dsi, 0xd3, 0x06);
> + dsi_generic_write_seq(dsi, 0xd4, 0x04);
> + dsi_generic_write_seq(dsi, 0x5e, 0x0d);
> + dsi_generic_write_seq(dsi, 0x11, 0x00);
> + msleep(100);
> + dsi_generic_write_seq(dsi, 0x29, 0x00);
> + dsi_generic_write_seq(dsi, 0x53, 0x24);
> +
> + return 0;
> +}
> +
> +static int tm5p5_nt35596_off(struct tm5p5_nt35596 *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display off: %d\n", ret);
> + return ret;
> + }
> + msleep(60);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> + return ret;
> + }
I wonder why the panel do not need a:
mipi_dsi_dcs_exit_sleep_mode()
and
mipi_dsi_dcs_set_display_on()
in the tm5p5_nt35596_on() function.
Usually the prepare and unprepare steps are
somehow symmetrical.
> +
> + dsi_dcs_write_seq(dsi, 0x4f, 0x01);
> +
> + return 0;
> +}
> +
> +static int tm5p5_nt35596_prepare(struct drm_panel *panel)
> +{
> + struct tm5p5_nt35596 *ctx = to_tm5p5_nt35596(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable regulators: %d\n", ret);
> + return ret;
> + }
> +
> + tm5p5_nt35596_reset(ctx);
> +
> + ret = tm5p5_nt35596_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
Line too long.
> + return ret;
> + }
> +
> + ctx->prepared = true;
> + return 0;
> +}
> +
> +static int tm5p5_nt35596_unprepare(struct drm_panel *panel)
> +{
> + struct tm5p5_nt35596 *ctx = to_tm5p5_nt35596(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + ret = tm5p5_nt35596_off(ctx);
> + if (ret < 0)
> + dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +
> + ctx->prepared = false;
> + return 0;
> +}
> +
> +static const struct drm_display_mode tm5p5_nt35596_mode = {
> + .clock = (1080 + 100 + 8 + 16) * (1920 + 4 + 2 + 4) * 60 / 1000,
> + .hdisplay = 1080,
> + .hsync_start = 1080 + 100,
> + .hsync_end = 1080 + 100 + 8,
> + .htotal = 1080 + 100 + 8 + 16,
> + .vdisplay = 1920,
> + .vsync_start = 1920 + 4,
> + .vsync_end = 1920 + 4 + 2,
> + .vtotal = 1920 + 4 + 2 + 4,
> + .vrefresh = 60,
> + .width_mm = 68,
> + .height_mm = 121,
> +};
We have patches pending to remove vrefresh, which I thought
was already applied. Anyway, keep it here.
We will eaither remove it later or if the patches crosses
I will do it when applying this patch.
> +
> +static int tm5p5_nt35596_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, &tm5p5_nt35596_mode);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs tm5p5_nt35596_panel_funcs = {
> + .prepare = tm5p5_nt35596_prepare,
> + .unprepare = tm5p5_nt35596_unprepare,
> + .get_modes = tm5p5_nt35596_get_modes,
> +};
> +
> +static int tm5p5_nt35596_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness = bl->props.brightness;
> + int ret;
> +
> + if (bl->props.power != FB_BLANK_UNBLANK ||
> + bl->props.fb_blank != FB_BLANK_UNBLANK ||
> + bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
> + brightness = 0;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return 0;
> +}
> +
> +// TODO: Check if /sys/class/backlight/.../actual_brightness actually returns
> +// correct values. If not, remove this function.
Please resolve this TODO
> +static int tm5p5_nt35596_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness = bl->props.brightness;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return brightness & 0xff;
> +}
> +
> +static const struct backlight_ops tm5p5_nt35596_bl_ops = {
> + .update_status = tm5p5_nt35596_bl_update_status,
> + .get_brightness = tm5p5_nt35596_bl_get_brightness,
> +};
> +
> +static struct backlight_device *
> +tm5p5_nt35596_create_backlight(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct backlight_properties props = {
> + .type = BACKLIGHT_RAW,
> + .brightness = 255,
> + .max_brightness = 255,
> + };
Make props const.
> +
> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> + &tm5p5_nt35596_bl_ops, &props);
> +}
> +
> +static int tm5p5_nt35596_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct tm5p5_nt35596 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->supplies[0].supply = "vdd";
> + ctx->supplies[1].supply = "vddio";
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> + ctx->supplies);
> + if (ret < 0) {
> + dev_err(dev, "Failed to get regulators: %d\n", ret);
> + return ret;
> + }
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset_gpio)) {
> + ret = PTR_ERR(ctx->reset_gpio);
> + dev_err(dev, "Failed to get reset-gpios: %d\n", ret);
> + return ret;
> + }
> +
> + ctx->dsi = dsi;
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_EOT_PACKET |
> + MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
> +
> + drm_panel_init(&ctx->panel, dev, &tm5p5_nt35596_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + ctx->panel.backlight = tm5p5_nt35596_create_backlight(dsi);
> + if (IS_ERR(ctx->panel.backlight)) {
> + ret = PTR_ERR(ctx->panel.backlight);
> + dev_err(dev, "Failed to create backlight: %d\n", ret);
> + return ret;
> + }
> +
> + ret = drm_panel_add(&ctx->panel);
> + if (ret < 0) {
> + dev_err(dev, "Failed to add panel: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int tm5p5_nt35596_remove(struct mipi_dsi_device *dsi)
> +{
> + struct tm5p5_nt35596 *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
Line too long I think
> +
> + drm_panel_remove(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id tm5p5_nt35596_of_match[] = {
> + { .compatible = "tm5p5,nt35596" },
vendor tm5p5 is not documented.
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, tm5p5_nt35596_of_match);
> +
> +static struct mipi_dsi_driver tm5p5_nt35596_driver = {
> + .probe = tm5p5_nt35596_probe,
> + .remove = tm5p5_nt35596_remove,
> + .driver = {
> + .name = "panel-tm5p5-nt35596",
> + .of_match_table = tm5p5_nt35596_of_match,
> + },
> +};
> +module_mipi_dsi_driver(tm5p5_nt35596_driver);
> +
> +MODULE_AUTHOR("Konrad Dybcio <konradybcio@xxxxxxxxx>");
> +MODULE_DESCRIPTION("DRM driver for tm5p5 nt35596 1080p video mode dsi panel");
> +MODULE_LICENSE("GPL v2");
> --
> 2.26.1
