* Lee Jones <lee.jones@xxxxxxxxxx> [140520 08:13]: > > > > http://www.omappedia.com/wiki/TWL4030_power_scripts > > Do you really want this bumph in the commit log? Removed the links from the commit log. > > +#define TWL_RESOURCE_ON(res) \ > > + { MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), 0x02 } > > Was ist das? Magic, floating, fluffy numbers. Ja, I added some comments and combined them further with defines to make the configuration more readable. > > -static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) > > +static int > > +twl4030_power_configure_scripts(const struct twl4030_power_data *pdata) > > Is this doing anything besides some sneaky clean-up? If not, it > might be worth mentioning that you're taking advantage of these > changes to conduct such activities. Added a note about that too.. > > { > > int err; > > int i; > > @@ -518,7 +544,8 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) > > return 0; > > } > > > > -static int twl4030_power_configure_resources(struct twl4030_power_data *pdata) > > +static int > > +twl4030_power_configure_resources(const struct twl4030_power_data *pdata) > > Ditto. > > > { > > struct twl4030_resconfig *resconfig = pdata->resource_config; > > int err; > > @@ -550,7 +577,7 @@ void twl4030_power_off(void) > > pr_err("TWL4030 Unable to power off\n"); > > } > > > > -static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata, > > +static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata, > > struct device_node *node) > > Etc. ..regarding all of these so we can use it also for match->data. Updated patch below. Regards, Tony 8< ---------------------------- From: Tony Lindgren <tony@xxxxxxxxxxx> Date: Tue, 20 May 2014 11:17:54 -0700 Subject: [PATCH] mfd: twl4030-power: Add generic reset configuration The twl4030 PMIC needs to be configured properly for things like warm reset and deeper idle states so the PMIC manages the regulators properly based on the hardware triggers from the SoC. Earlier we have configured twl4030 using platform data, but we want to do it for device tree based booting also. In some cases configuring twl4030 is needed for things to work. For example, when rebooting an OMAP3530 at 125 MHz, it hangs. With this patch, TWL4030 will be reset when a warm reset occures, and OMAP3530 does not hang on reboot. Let's add device tree support and configure things for warm reset as the default when compatible = "ti,twl4030-power". More complicated configurations can be added to the driver based on other compatible flags. Note we now also make the pdata const like it should be. This allows use it for match->data with the device tree related functions. Based on earlier patch by Matthias Brugger <matthias.bgg@xxxxxxxxx> and Lesly A M <leslyam@xxxxxx>. Cc: Matthias Brugger <matthias.bgg@xxxxxxxxx> Cc: Robert Nelson <robertcnelson@xxxxxxxxx> Cc: Peter De Schrijver <pdeschrijver@xxxxxxxxxx> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> Cc: Lee Jones <lee.jones@xxxxxxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -5,7 +5,12 @@ to control the power resources, including power scripts. For now, the binding only supports the complete shutdown of the system after poweroff. Required properties: -- compatible : must be "ti,twl4030-power" +- compatible : must be one of the following + "ti,twl4030-power" + "ti,twl4030-power-reset" + +The use of ti,twl4030-power-reset is recommended at least on +3530 that needs a special configuration for warm reset to work. Optional properties: - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -29,6 +29,7 @@ #include <linux/i2c/twl.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/of_device.h> #include <asm/mach-types.h> @@ -128,6 +129,40 @@ static u8 res_config_addrs[] = { [RES_MAIN_REF] = 0x94, }; +/* + * Usable values for .remap_sleep and .remap_off + * Based on table "5.3.3 Resource Operating modes" + */ +enum { + TWL_REMAP_OFF = 0, + TWL_REMAP_SLEEP = 8, + TWL_REMAP_ACTIVE = 9, +}; + +/* + * Macros to configure the PM register states for various resources. + * Note that we can make MSG_SINGULAR etc private to this driver once + * omap3 has been made DT only. + */ +#define TWL_DFLT_DELAY 2 /* typically 2 32 KiHz cycles */ +#define TWL_RESOURCE_SET(res, state) \ + { MSG_SINGULAR(DEV_GRP_NULL, (res), (state)), TWL_DFLT_DELAY } +#define TWL_RESOURCE_ON(res) TWL_RESOURCE_SET(res, RES_STATE_ACTIVE) +#define TWL_RESOURCE_OFF(res) TWL_RESOURCE_SET(res, RES_STATE_OFF) +#define TWL_RESOURCE_RESET(res) TWL_RESOURCE_SET(res, RES_STATE_WRST) +/* + * It seems that type1 and type2 is just the resource init order + * number for the type1 and type2 group. + */ +#define TWL_RESOURCE_GROUP_RESET(group, type1, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2), \ + RES_STATE_WRST), TWL_DFLT_DELAY } +#define TWL_REMAP_SLEEP(res, devgrp, typ, typ2) \ + { .resource = (res), .devgroup = (devgrp), \ + .type = (typ), .type2 = (typ2), \ + .remap_off = TWL_REMAP_OFF, \ + .remap_sleep = TWL_REMAP_SLEEP, } + static int twl4030_write_script_byte(u8 address, u8 byte) { int err; @@ -502,7 +537,8 @@ int twl4030_remove_script(u8 flags) return err; } -static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) +static int +twl4030_power_configure_scripts(const struct twl4030_power_data *pdata) { int err; int i; @@ -518,7 +554,8 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) return 0; } -static int twl4030_power_configure_resources(struct twl4030_power_data *pdata) +static int +twl4030_power_configure_resources(const struct twl4030_power_data *pdata) { struct twl4030_resconfig *resconfig = pdata->resource_config; int err; @@ -550,7 +587,7 @@ void twl4030_power_off(void) pr_err("TWL4030 Unable to power off\n"); } -static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata, +static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata, struct device_node *node) { if (pdata && pdata->use_poweroff) @@ -562,10 +599,60 @@ static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata, return false; } +#ifdef CONFIG_OF + +/* Generic warm reset configuration for omap3 */ + +static struct twl4030_ins omap3_wrst_seq[] = { + TWL_RESOURCE_OFF(RES_NRES_PWRON), + TWL_RESOURCE_OFF(RES_RESET), + TWL_RESOURCE_RESET(RES_MAIN_REF), + TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2), + TWL_RESOURCE_RESET(RES_VUSB_3V1), + TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1), + TWL_RESOURCE_GROUP_RESET(RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0), + TWL_RESOURCE_ON(RES_RESET), + TWL_RESOURCE_ON(RES_NRES_PWRON), +}; + +static struct twl4030_script omap3_wrst_script = { + .script = omap3_wrst_seq, + .size = ARRAY_SIZE(omap3_wrst_seq), + .flags = TWL4030_WRST_SCRIPT, +}; + +static struct twl4030_script *omap3_reset_scripts[] = { + &omap3_wrst_script, +}; + +static struct twl4030_resconfig omap3_rconfig[] = { + TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, -1, -1), + TWL_REMAP_SLEEP(RES_VDD1, DEV_GRP_P1, -1, -1), + TWL_REMAP_SLEEP(RES_VDD2, DEV_GRP_P1, -1, -1), + { 0, 0 }, +}; + +static struct twl4030_power_data omap3_reset = { + .scripts = omap3_reset_scripts, + .num = ARRAY_SIZE(omap3_reset_scripts), + .resource_config = omap3_rconfig, +}; + +static struct of_device_id twl4030_power_of_match[] = { + { + .compatible = "ti,twl4030-power-reset", + .data = &omap3_reset, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl4030_power_of_match); +#endif /* CONFIG_OF */ + static int twl4030_power_probe(struct platform_device *pdev) { - struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev); + const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev); struct device_node *node = pdev->dev.of_node; + const struct of_device_id *match; int err = 0; int err2 = 0; u8 val; @@ -586,8 +673,12 @@ static int twl4030_power_probe(struct platform_device *pdev) return err; } + match = of_match_device(of_match_ptr(twl4030_power_of_match), + &pdev->dev); + if (match && match->data) + pdata = match->data; + if (pdata) { - /* TODO: convert to device tree */ err = twl4030_power_configure_scripts(pdata); if (err) { pr_err("TWL4030 failed to load scripts\n"); @@ -637,14 +728,6 @@ static int twl4030_power_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF -static const struct of_device_id twl4030_power_of_match[] = { - {.compatible = "ti,twl4030-power", }, - { }, -}; -MODULE_DEVICE_TABLE(of, twl4030_power_of_match); -#endif - static struct platform_driver twl4030_power_driver = { .driver = { .name = "twl4030_power", diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index d2b1670..36e5496 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -498,7 +498,10 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot) #define RES_GRP_ALL 0x7 /* All resource groups */ #define RES_TYPE2_R0 0x0 +#define RES_TYPE2_R1 0x1 +#define RES_TYPE2_R2 0x2 +#define RES_TYPE_R0 0x0 #define RES_TYPE_ALL 0x7 /* Resource states */ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html