Re: [PATCH V3 1/5] dt-bindings: clock: Convert i.MX6Q clock to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 17, 2020 at 08:41:27AM +0800, Anson Huang wrote:
> Convert the i.MX6Q clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> Changes since V2:
> 	- Force 'interrupts' minItem/maxItem to 2.

Not necessary. maxItems is sufficient.

> ---
>  .../devicetree/bindings/clock/imx6q-clock.txt      | 41 -------------
>  .../devicetree/bindings/clock/imx6q-clock.yaml     | 67 ++++++++++++++++++++++
>  2 files changed, 67 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> deleted file mode 100644
> index 13d36d4..0000000
> --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -* Clock bindings for Freescale i.MX6 Quad
> -
> -Required properties:
> -- compatible: Should be "fsl,imx6q-ccm"
> -- reg: Address and length of the register set
> -- interrupts: Should contain CCM interrupt
> -- #clock-cells: Should be <1>
> -
> -Optional properties:
> -- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
> -  on power off.
> -  Use this property if the SoC should be powered off by external power
> -  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
> -  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
> -  be using "syscon-poweroff" driver instead.
> -- clocks: list of clock specifiers, must contain an entry for each entry
> -          in clock-names
> -- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2"
> -
> -The clock consumer should specify the desired clock by having the clock
> -ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
> -for the full list of i.MX6 Quad and DualLite clock IDs.
> -
> -Examples:
> -
> -#include <dt-bindings/clock/imx6qdl-clock.h>
> -
> -clks: ccm@20c4000 {
> -	compatible = "fsl,imx6q-ccm";
> -	reg = <0x020c4000 0x4000>;
> -	interrupts = <0 87 0x04 0 88 0x04>;
> -	#clock-cells = <1>;
> -};
> -
> -uart1: serial@2020000 {
> -	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
> -	reg = <0x02020000 0x4000>;
> -	interrupts = <0 26 0x04>;
> -	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
> -	clock-names = "ipg", "per";
> -};
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> new file mode 100644
> index 0000000..0daf789
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Clock bindings for Freescale i.MX6 Quad
> +
> +maintainers:
> +  - Anson Huang <Anson.Huang@xxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: fsl,imx6q-ccm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 2
> +    maxItems: 2
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  clocks:
> +    items:
> +      - description: 24m osc
> +      - description: 32k osc
> +      - description: ckih1 clock input
> +      - description: anaclk1 clock input
> +      - description: anaclk2 clock input
> +
> +  clock-names:
> +    items:
> +      - const: osc
> +      - const: ckil
> +      - const: ckih1
> +      - const: anaclk1
> +      - const: anaclk2
> +
> +  fsl,pmic-stby-poweroff:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: |
> +      Use this property if the SoC should be powered off by external power
> +      management IC (PMIC) triggered via PMIC_STBY_REQ signal.
> +      Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
> +      be using "syscon-poweroff" driver instead.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - '#clock-cells'
> +
> +examples:
> +  # Clock Control Module node:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    clks: clock-controller@20c4000 {

Drop the label.

> +        compatible = "fsl,imx6q-ccm";
> +        reg = <0x020c4000 0x4000>;
> +        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
> +                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
> +        #clock-cells = <1>;
> +    };
> -- 
> 2.7.4
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux