Re: [PATCH v1 1/2] dt-bindings: mfd: Document QTI I2C PMIC controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 28 Apr 2020 17:30:11 -0700, Guru Das Srinagesh wrote:
> The Qualcomm Technologies, Inc. I2C PMIC Controller is used by
> multi-function PMIC devices which communicate over the I2C bus.  The
> controller enumerates all child nodes as platform devices, and
> instantiates a regmap interface for them to communicate over the I2C
> bus.
> 
> The controller also controls interrupts for all of the children platform
> devices.  The controller handles the summary interrupt by deciphering
> which peripheral triggered the interrupt, and which of the peripheral
> interrupts were triggered.  Finally, it calls the interrupt handlers for
> each of the virtual interrupts that were registered.
> 
> Signed-off-by: Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
> ---
> Changes from v0:
> - Fixed "FATAL ERROR: Unable to parse input tree" error thrown by `make
>   dt_binding_check`.
> 
>  .../devicetree/bindings/mfd/qcom,i2c-pmic.yaml     | 86 ++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.example.dts:19.11-23: Warning (reg_format): /example-0/qcom,smb138x@8:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

See https://patchwork.ozlabs.org/patch/1278818

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux