[PATCH v3 17/17] arm64: dts: sc7180: Add qspi opps and power-domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the power domain supporting performance state and the corresponding
OPP tables for the qspi device on sc7180

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index b87f3eb..c340a63 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1421,6 +1421,25 @@
 			#power-domain-cells = <1>;
 		};
 
+		qspi_opp_table: qspi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-150000000 {
+				opp-hz = /bits/ 64 <150000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
 		qspi: spi@88dc000 {
 			compatible = "qcom,qspi-v1";
 			reg = <0 0x088dc000 0 0x600>;
@@ -1430,6 +1449,8 @@
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
 			status = "disabled";
 		};
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux