Add gpio-line-names properties to the gpio controller nodes. The names correspond to the AM335x pin names which are also the muxmode 0 signal names. Refer to "Table 4-2. Pin Attributes" in the TI AM335x Sitara Processors datasheet: http://www.ti.com/lit/ds/symlink/am3358.pdf Signed-off-by: Drew Fustini <drew@xxxxxxxxxxxxxxx> --- arch/arm/boot/dts/am33xx-l4.dtsi | 134 +++++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 5ed7f3c58c0f..1ac574ebfe74 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -157,6 +157,39 @@ #interrupt-cells = <2>; reg = <0x0 0x1000>; interrupts = <96>; + gpio-line-names = + "MDIO_DATA", + "MDIO_CLK", + "SPI0_SCLK", + "SPI0_D0", + "SPI0_D1", + "SPI0_CS0", + "SPI0_CS1", + "ECAP0_IN_PWM0_OUT", + "LCD_DATA12", + "LCD_DATA13", + "LCD_DATA14", + "LCD_DATA15", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RXD", + "UART1_TXD", + "GMII1_TXD3", + "GMII1_TXD2", + "USB0_DRVVBUS", + "XDMA_EVENT_INTR0", + "XDMA_EVENT_INTR1", + "GMII1_TXD1", + "GPMC_AD8", + "GPMC_AD9", + "NC", + "NC", + "GPMC_AD10", + "GPMC_AD11", + "GMII1_TXD0", + "RMII1_REFCLK", + "GPMC_WAIT0", + "GPMC_WPN"; }; }; @@ -1304,6 +1337,39 @@ #interrupt-cells = <2>; reg = <0x0 0x1000>; interrupts = <98>; + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "UART0_CTSN", + "UART0_RTSN", + "UART0_RXD", + "UART0_TXD", + "GPMC_AD12", + "GPMC_AD13", + "GPMC_AD14", + "GPMC_AD15", + "GPMC_A0", + "GPMC_A1", + "GPMC_A2", + "GPMC_A3", + "GPMC_A4", + "GPMC_A5", + "GPMC_A6", + "GPMC_A7", + "GPMC_A8", + "GPMC_A9", + "GPMC_A10", + "GPMC_A11", + "GPMC_BE1N", + "GPMC_CSN0", + "GPMC_CSN1", + "GPMC_CSN2"; }; }; @@ -1706,6 +1772,40 @@ #interrupt-cells = <2>; reg = <0x0 0x1000>; interrupts = <32>; + gpio-line-names = + "GPMC_CSN3", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_REN", + "GPMC_WEN", + "GPMC_BE0N_CLE", + "LCD_DATA0", + "LCD_DATA1", + "LCD_DATA2", + "LCD_DATA3", + "LCD_DATA4", + "LCD_DATA5", + "LCD_DATA6", + "LCD_DATA7", + "LCD_DATA8", + "LCD_DATA9", + "LCD_DATA10", + "LCD_DATA11", + "GMII1_RXD3", + "GMII1_RXD2", + "GMII1_RXD1", + "GMII1_RXD0", + "LCD_VSYNC", + "LCD_HSYNC", + "LCD_PCLK", + "LCD_AC_BIAS_EN", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; + }; }; @@ -1739,6 +1839,40 @@ #interrupt-cells = <2>; reg = <0x0 0x1000>; interrupts = <62>; + gpio-line-names = + "GMII1_COL", + "GMII1_CRS", + "GMII1_RXER", + "GMII1_TXEN", + "GMII1_RXDV", + "I2C0_SDA", + "I2C0_SCL", + "EMU0", + "EMU1", + "GMII1_TXCLK", + "GMII1_RXCLK", + "NC", + "NC", + "USB1_DRVVBUS", + "MCASP0_ACLKX", + "MCASP0_FSX", + "MCASP0_AXR0", + "MCASP0_AHCLKR", + "MCASP0_ACLKR", + "MCASP0_FSR", + "MCASP0_AXR1", + "MCASP0_AHCLKX", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; + }; }; -- 2.20.1
