On Mon, 27 Apr 2020 16:00:33 +0200, Angelo Ribeiro wrote: > Add dt-bindings for Synopsys DesignWare MIPI DSI Host and VPG (Video > Pattern Generator) support in the IPK display subsystem. > > The Synopsys DesignWare IPK display video pipeline is composed by a DSI > controller (snps,dw-ipk-dsi) and a VPG (snps,dw-ipk-vpg) as DPI > stimulus. Typically is used the Raspberry Pi > (raspberrypi,7inch-touchscreen-panel) as DSI panel that requires a > I2C controller (snps,designware-i2c). > > Reported-by: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: David Airlie <airlied@xxxxxxxx> > Cc: Daniel Vetter <daniel@xxxxxxxx> > Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Cc: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx> > Cc: Joao Pinto <jpinto@xxxxxxxxxxxx> > Signed-off-by: Angelo Ribeiro <angelo.ribeiro@xxxxxxxxxxxx> > --- > Changes since v3: > - Fixed dt-binding breaking on `make dt_binding_check`. > > Changes since v2: > - Fixed dt-bindings issues, see > https://patchwork.ozlabs.org/patch/1260819/. > --- > .../bindings/display/snps,dw-ipk-dsi.yaml | 159 +++++++++++++++++++++ > .../bindings/display/snps,dw-ipk-vpg.yaml | 73 ++++++++++ > 2 files changed, 232 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/snps,dw-ipk-dsi.yaml > create mode 100644 Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.yaml > My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/snps,dw-ipk-dsi.example.dt.yaml: dw-ipk-dsi@2000: compatible: ['snps,dw-ipk-dsi'] is too short See https://patchwork.ozlabs.org/patch/1277673 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
