[PATCH] ARM: dts: r7s9210: Remove bogus clock-names from OSTM nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Usually it does not hurt to add "clock-names" properties, even if the
(pre-json-schema) DT bindings do not mention them.

However, the actual clock names for the OS Timer nodes are not fixed,
but contain the indices of the consumer instances.  Hence they cannot
easily be used by a driver, without scanning for all possible indices.

Remove them, as the OSTM DT bindings do not specify clock-names anyway.

Fixes: bbbcd02b82552907 ("ARM: dts: r7s9210: Initial SoC device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
To be queued in renesas-fixes for v5.7, to avoid the json-schema OSTM DT
bindings conversion introducing a regression.
---
 arch/arm/boot/dts/r7s9210.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index 72b79770e336a79e..cace4380749711d7 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -304,7 +304,6 @@
 			reg = <0xe803b000 0x30>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 36>;
-			clock-names = "ostm0";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
@@ -314,7 +313,6 @@
 			reg = <0xe803c000 0x30>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 35>;
-			clock-names = "ostm1";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
@@ -324,7 +322,6 @@
 			reg = <0xe803d000 0x30>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 34>;
-			clock-names = "ostm2";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux