On Wed, 15 Apr 2020 at 18:21, Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote: > > On 20-04-15 11:07, Rob Herring wrote: > > On Wed, Apr 08, 2020 at 01:08:14PM +0200, Robert Foss wrote: > > > From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> > > > > > > This patch adds documentation of device tree in YAML schema for the > > > OV8856 CMOS image sensor. > > > > > > Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> > > > Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx> > > > --- > > > > > > - Changes since v6: > > > * Marco: remove qcom specifics from DT example > > > > > > - Changes since v5: > > > * Add assigned-clocks and assigned-clock-rates > > > * robher: dt-schema errors > > > > > > - Changes since v4: > > > * Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description > > > * Add clock-lanes property to example > > > * robher: Fix syntax error in devicetree example > > > > > > - Changes since v3: > > > * robher: Fix syntax error > > > * robher: Removed maxItems > > > * Fixes yaml 'make dt-binding-check' errors > > > > > > - Changes since v2: > > > Fixes comments from from Andy, Tomasz, Sakari, Rob. > > > * Convert text documentation to YAML schema. > > > > > > - Changes since v1: > > > Fixes comments from Sakari, Tomasz > > > * Add clock-frequency and link-frequencies in DT > > > > > > .../devicetree/bindings/media/i2c/ov8856.yaml | 143 ++++++++++++++++++ > > > MAINTAINERS | 1 + > > > 2 files changed, 144 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml > > > new file mode 100644 > > > index 000000000000..96bef5403d7e > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml > > > @@ -0,0 +1,143 @@ > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > > +# Copyright (c) 2019 MediaTek Inc. > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Omnivision OV8856 CMOS Sensor Device Tree Bindings > > > + > > > +maintainers: > > > + - Ben Kao <ben.kao@xxxxxxxxx> > > > + - Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> > > > + > > > +description: |- > > > + The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS > > > + image sensor that delivers 3264x2448 at 30fps. It provides full-frame, > > > + sub-sampled, and windowed 10-bit MIPI images in various formats via the > > > + Serial Camera Control Bus (SCCB) interface. This chip is programmable > > > + through I2C and two-wire SCCB. The sensor output is available via CSI-2 > > > + serial data output (up to 4-lane). > > > + > > > +properties: > > > + compatible: > > > + const: ovti,ov8856 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + clocks: > > > + maxItems: 1 > > > + > > > + clock-names: > > > + description: > > > + Input clock for the sensor. > > > + items: > > > + - const: xvclk > > > + > > > + assigned-clocks: > > > + description: > > > + Input clock for the sensor. > > > + > > > + assigned-clock-rates: > > > + description: > > > + Frequency of the xvclk clock in Hertz. > > > > These 2 should have a 'maxItems: 1' > > Don't know why those properties are needed here.. IMHO this shouldn't be > part of the binding or at least it should be optional and not required. > All we need is the clocks and the clock-names property. Thanks Marco, I'll make it optional for the next revision. > > > > + dovdd-supply: > > > + description: > > > + Definition of the regulator used as interface power supply. > > > + > > > + avdd-supply: > > > + description: > > > + Definition of the regulator used as analog power supply. > > > + > > > + dvdd-supply: > > > + description: > > > + Definition of the regulator used as digital power supply. > > > + > > > + reset-gpios: > > > + description: > > > + The phandle and specifier for the GPIO that controls sensor reset. > > > + This corresponds to the hardware pin XSHUTDOWN which is physically > > > + active low. > > > + > > > + port: > > > + type: object > > > + additionalProperties: false > > > + description: > > > + A node containing input and output port nodes with endpoint definitions > > > > Only an output, right? > > > > > + as documented in > > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > > + > > > + properties: > > > + endpoint: > > > + type: object > > > + > > > + properties: > > > + clock-lanes: > > > + maxItems: 1 > > > + > > > + data-lanes: > > > + maxItems: 1 > > > + > > > + remote-endpoint: true > > > + > > > + required: > > > + - clock-lanes > > > + - data-lanes > > > + - remote-endpoint > > > + > > > + required: > > > + - endpoint > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - clocks > > > + - clock-names > > > + - assigned-clocks > > > + - assigned-clock-rates > > > + - dovdd-supply > > > + - avdd-supply > > > + - dvdd-supply > > > + - reset-gpios > > > + - port > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/gpio/gpio.h> > > > + > > > + i2c { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + ov8856: camera@10 { > > > + compatible = "ovti,ov8856"; > > > + reg = <0x10>; > > > + > > > + reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&clk_24m_cam>; > > > + > > > + clocks = <&cam_osc>; > > > + clock-names = "xvclk"; > > > + assigned-clocks = <&cam_osc>; > > > + assigned-clock-rates = <19200000>; > > > + > > > + avdd-supply = <&mt6358_vcama2_reg>; > > > + dvdd-supply = <&mt6358_vcamd_reg>; > > > + dovdd-supply = <&mt6358_vcamio_reg>; > > > + > > > + port { > > > + wcam_out: endpoint { > > > + remote-endpoint = <&mipi_in_wcam>; > > > + clock-lanes = <0>; > > > + data-lanes = <1 2 3 4>; > > > + link-frequencies = /bits/ 64 <360000000 180000000>; > > > + }; > > > + }; > > > + }; > > > + }; > > > +... > > > \ No newline at end of file > > > > ^^^ > > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > index 534a8dc4f84a..3f35c6e9700a 100644 > > > --- a/MAINTAINERS > > > +++ b/MAINTAINERS > > > @@ -12465,6 +12465,7 @@ L: linux-media@xxxxxxxxxxxxxxx > > > T: git git://linuxtv.org/media_tree.git > > > S: Maintained > > > F: drivers/media/i2c/ov8856.c > > > +F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml > > > > > > OMNIVISION OV9650 SENSOR DRIVER > > > M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> > > > -- > > > 2.25.1 > > > > > > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | http://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
