This converts the Analogix ANX7814 bridge DT binding to yaml. Port definitions and descriptions were expanded, apart from that it's a direct translation from the original binding. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@xxxxxxxxxxxxx> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx> --- Changes in v3 (suggested by Sam Ravnborg): - Rename example node i2c0 to i2c. Changes in v2 (suggested by Enric Balletbo): - File name change: use full compatible string. - Binding description removed. - #address-cells and #size-cells properties removed from ports node. - Example node renamed: anx7814 -> bridge. Tested with: make dt_binding_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml> make dtbs_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml> .../display/bridge/analogix,anx7814.yaml | 124 ++++++++++++++++++ .../bindings/display/bridge/anx7814.txt | 42 ------ 2 files changed, 124 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml delete mode 100644 Documentation/devicetree/bindings/display/bridge/anx7814.txt diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml new file mode 100644 index 000000000000..13f0b52edefd --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7814 SlimPort (Full-HD Transmitter) + +maintainers: + - Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> + +properties: + compatible: + enum: + - analogix,anx7808 + - analogix,anx7812 + - analogix,anx7814 + - analogix,anx7818 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: Should contain the INTP interrupt. + + hpd-gpios: + maxItems: 1 + description: Which GPIO to use for hpd. + + pd-gpios: + maxItems: 1 + description: Which GPIO to use for power down. + + reset-gpios: + maxItems: 1 + description: Which GPIO to use for reset. + + dvdd10-supply: + maxItems: 1 + description: Regulator for 1.0V digital core power. + + ports: + type: object + description: + A node containing input and output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + + properties: + port@0: + type: object + description: Video port for HDMI input. + + properties: + reg: + const: 0 + + port@1: + type: object + description: + Video port for SlimPort, DisplayPort, eDP or MyDP output. + + properties: + reg: + const: 1 + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - hpd-gpios + - pd-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7814: bridge@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + + port@1 { + reg = <1>; + anx7814_out: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt deleted file mode 100644 index 17258747fff6..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt +++ /dev/null @@ -1,42 +0,0 @@ -Analogix ANX7814 SlimPort (Full-HD Transmitter) ------------------------------------------------ - -The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter -designed for portable devices. - -Required properties: - - - compatible : Must be one of: - "analogix,anx7808" - "analogix,anx7812" - "analogix,anx7814" - "analogix,anx7818" - - reg : I2C address of the device - - interrupts : Should contain the INTP interrupt - - hpd-gpios : Which GPIO to use for hpd - - pd-gpios : Which GPIO to use for power down - - reset-gpios : Which GPIO to use for reset - -Optional properties: - - - dvdd10-supply : Regulator for 1.0V digital core power. - - Video port for HDMI input, using the DT bindings defined in [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - anx7814: anx7814@38 { - compatible = "analogix,anx7814"; - reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ - hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; - pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; - port { - anx7814_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; - }; -- 2.18.0
