[PATCH 1/4] arm64: dts: qcom: msm8916: Add blsp_i2c1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



MSM8916 has another I2C QUP controller that can be enabled on
GPIO 2 and 3.

Add blsp_i2c1 to msm8916.dtsi and disable it by default.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
On samsung-a2015 there is an external TFA9895 speaker amplifier
connected to blsp_i2c1. There isn't a proper mainline driver
for it (yet?), but it's nice to have the I2C bus in mainline at least.
---
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 24 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi      | 15 ++++++++++++++
 2 files changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 242aaea68804..b45fd12856ea 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -262,6 +262,30 @@ pinconf {
 		};
 	};
 
+	i2c1_default: i2c1_default {
+		pinmux {
+			function = "blsp_i2c1";
+			pins = "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio2", "gpio3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	i2c1_sleep: i2c1_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio2", "gpio3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	i2c2_default: i2c2_default {
 		pinmux {
 			function = "blsp_i2c2";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8b429954ea29..6ab7cabde370 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -612,6 +612,21 @@ blsp_spi6: spi@78ba000 {
 			status = "disabled";
 		};
 
+		blsp_i2c1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b6000 0x500>;
-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux