Re: [PATCH v2 3/4] mfd: tps65917: Add driver for the TPS65917 PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> The TPS65917 chip is a power management IC for Portable Navigation Systems
> and Tablet Computing devices. It contains the following components:
> 
>  - Regulators.
>  - Over Temperature warning and Shut down.
> 
> This patch adds support for tps65917 mfd device. At this time only
> the regulator functionality is made available.
> 
> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
> ---
> Changes in V2:
> 
> Added volatile register check as some of the registers
> in the set are volatile.
> 
>  drivers/mfd/Kconfig          |   12 +
>  drivers/mfd/Makefile         |    1 +
>  drivers/mfd/tps65917.c       |  573 ++++++++++++++++

We have quite the collection of tps* files now in MFD.  How different
are they really?  Is consolidation possible?

>  include/linux/mfd/tps65917.h | 1509 ++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 2095 insertions(+)
>  create mode 100644 drivers/mfd/tps65917.c
>  create mode 100644 include/linux/mfd/tps65917.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3383412..ac73e58 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -925,6 +925,18 @@ config MFD_TPS65912_SPI
>  	  If you say yes here you get support for the TPS65912 series of
>  	  PM chips with SPI interface.
>  
> +config MFD_TPS65917
> +	bool "TI TPS65917 series chips"
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	select REGMAP_IRQ
> +	depends on I2C=y
> +	help
> +	  If you say yes here you get support for the TPS65917
> +	  PMIC chips from Texas Instruments. The device provides
> +	  5 confgurable SPMSs and 5 LDOs, thermal protection module,
> +	  GPADC.
> +
>  config MFD_TPS80031
>  	bool "TI TPS80031/TPS80032 Power Management chips"
>  	depends on I2C=y
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 2851275..248a60b 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -69,6 +69,7 @@ tps65912-objs                   := tps65912-core.o tps65912-irq.o
>  obj-$(CONFIG_MFD_TPS65912)	+= tps65912.o
>  obj-$(CONFIG_MFD_TPS65912_I2C)	+= tps65912-i2c.o
>  obj-$(CONFIG_MFD_TPS65912_SPI)  += tps65912-spi.o
> +obj-$(CONFIG_MFD_TPS65917)	+= tps65917.o
>  obj-$(CONFIG_MFD_TPS80031)	+= tps80031.o
>  obj-$(CONFIG_MENELAUS)		+= menelaus.o
>  
> diff --git a/drivers/mfd/tps65917.c b/drivers/mfd/tps65917.c
> new file mode 100644
> index 0000000..dbd67c5
> --- /dev/null
> +++ b/drivers/mfd/tps65917.c
> @@ -0,0 +1,573 @@
> +/*
> + * TI TPS65917 Integrated power management chipsets
> + *
> + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/regmap.h>
> +#include <linux/err.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/tps65917.h>
> +#include <linux/of_device.h>
> +
> +#define TPS65917_EXT_REQ (TPS65917_EXT_CONTROL_ENABLE1 |	\
> +			TPS65917_EXT_CONTROL_ENABLE2 |	\
> +			TPS65917_EXT_CONTROL_NSLEEP)
> +
> +struct tps65917_sleep_requestor_info {
> +	int id;
> +	int reg_offset;
> +	int bit_pos;
> +};
> +
> +#define EXTERNAL_REQUESTOR(_id, _offset, _pos)		\
> +		[TPS65917_EXTERNAL_REQSTR_ID_##_id] = {		\
> +		.id = TPS65917_EXTERNAL_REQSTR_ID_##_id,	\
> +		.reg_offset = _offset,			\
> +		.bit_pos = _pos,			\
> +	}
> +
> +static struct tps65917_sleep_requestor_info sleep_req_info[] = {
> +	EXTERNAL_REQUESTOR(REGEN1, 0, 0),
> +	EXTERNAL_REQUESTOR(REGEN2, 0, 1),
> +	EXTERNAL_REQUESTOR(REGEN3, 0, 6),
> +	EXTERNAL_REQUESTOR(SMPS1, 1, 0),
> +	EXTERNAL_REQUESTOR(SMPS2, 1, 1),
> +	EXTERNAL_REQUESTOR(SMPS3, 1, 2),
> +	EXTERNAL_REQUESTOR(SMPS4, 1, 3),
> +	EXTERNAL_REQUESTOR(SMPS5, 1, 4),
> +	EXTERNAL_REQUESTOR(LDO1, 2, 0),
> +	EXTERNAL_REQUESTOR(LDO2, 2, 1),
> +	EXTERNAL_REQUESTOR(LDO3, 2, 2),
> +	EXTERNAL_REQUESTOR(LDO4, 2, 3),
> +	EXTERNAL_REQUESTOR(LDO5, 2, 4),
> +};
> +
> +static int tps65917_voltaile_regs[] = {
> +	TPS65917_SMPS1_CTRL,
> +	TPS65917_SMPS2_CTRL,
> +	TPS65917_SMPS3_CTRL,
> +	TPS65917_SMPS4_CTRL,
> +	TPS65917_SMPS5_CTRL,
> +	TPS65917_LDO1_CTRL,
> +	TPS65917_LDO2_CTRL,
> +	TPS65917_LDO3_CTRL,
> +	TPS65917_LDO4_CTRL,
> +	TPS65917_LDO5_CTRL,
> +};
> +
> +static bool is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	int i;
> +
> +	/*
> +	 * Caching all the required regulator registers.
> +	 */
> +
> +	for (i = 0; i < 11; i++)

Are you sure?  Looks like 10 to me.

Use ARRAY_SIZE(tps65917_voltaile_regs) instead

> +		if (reg == tps65917_voltaile_regs[i])
> +			return true;
> +
> +	return false;
> +}

[...]

> +int tps65917_ext_control_req_config(struct tps65917 *tps65917,
> +				    enum tps65917_external_requestor_id id,
> +				    int ext_ctrl, bool enable)
> +{
> +	int preq_mask_bit = 0;
> +	int reg_add = 0;
> +	int bit_pos;
> +	int ret;
> +
> +	if (!(ext_ctrl & TPS65917_EXT_REQ))
> +		return 0;
> +
> +	if (id >= TPS65917_EXTERNAL_REQSTR_ID_MAX)
> +		return 0;
> +
> +	if (ext_ctrl & TPS65917_EXT_CONTROL_NSLEEP) {
> +		reg_add = TPS65917_NSLEEP_RES_ASSIGN;
> +		preq_mask_bit = 0;
> +	} else if (ext_ctrl & TPS65917_EXT_CONTROL_ENABLE1) {
> +		reg_add = TPS65917_ENABLE1_RES_ASSIGN;
> +		preq_mask_bit = 1;
> +	} else if (ext_ctrl & TPS65917_EXT_CONTROL_ENABLE2) {
> +		reg_add = TPS65917_ENABLE2_RES_ASSIGN;
> +		preq_mask_bit = 2;
> +	}
> +
> +	bit_pos = sleep_req_info[id].bit_pos;
> +	reg_add += sleep_req_info[id].reg_offset;

New line here.

> +	if (enable)
> +		ret = tps65917_update_bits(tps65917, TPS65917_RESOURCE_BASE,
> +					   reg_add, BIT(bit_pos), BIT(bit_pos));
> +	else
> +		ret = tps65917_update_bits(tps65917, TPS65917_RESOURCE_BASE,
> +					   reg_add, BIT(bit_pos), 0);

Would prefer:

ret = tps65917_update_bits(tps65917, TPS65917_RESOURCE_BASE,
			   reg_add, BIT(bit_pos),
			   enable ? BIT(bit_pos) : 0);

> +	if (ret < 0) {
> +		dev_err(tps65917->dev, "Resource reg 0x%02x update failed %d\n",
> +			reg_add, ret);
> +		return ret;
> +	}
> +
> +	/* Unmask the PREQ */
> +	ret = tps65917_update_bits(tps65917, TPS65917_PMU_CONTROL_BASE,
> +				   TPS65917_POWER_CTRL, BIT(preq_mask_bit), 0);
> +	if (ret < 0) {
> +		dev_err(tps65917->dev, "POWER_CTRL register update failed %d\n",
> +			ret);
> +		return ret;
> +	}
> +	return ret;

Just display the error - the function returns 'ret' regardless.

> +}
> +EXPORT_SYMBOL_GPL(tps65917_ext_control_req_config);
> +
> +static int tps65917_set_pdata_irq_flag(struct i2c_client *i2c,
> +				       struct tps65917_platform_data *pdata)
> +{
> +	struct irq_data *irq_data = irq_get_irq_data(i2c->irq);

New line here.

> +	if (!irq_data) {
> +		dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
> +		return -EINVAL;
> +	}
> +
> +	pdata->irq_flags = irqd_get_trigger_type(irq_data);
> +	dev_info(&i2c->dev, "Irq flag is 0x%08x\n", pdata->irq_flags);

Is this line really required?

New line here.

> +	return 0;
> +}
> +
> +static void tps65917_dt_to_pdata(struct i2c_client *i2c,
> +				 struct tps65917_platform_data *pdata)
> +{
> +	struct device_node *node = i2c->dev.of_node;

What kind of node?

Personally, I'd prefer the use of 'np' as a variable name.

> +	int ret;
> +	u32 prop;
> +
> +	ret = of_property_read_u32(node, "ti,mux-pad1", &prop);
> +	if (!ret) {
> +		pdata->mux_from_pdata = 1;

This should be a bool.

> +		pdata->pad1 = prop;
> +	}
> +
> +	ret = of_property_read_u32(node, "ti,mux-pad2", &prop);
> +	if (!ret) {
> +		pdata->mux_from_pdata = 1;

As above.

> +		pdata->pad2 = prop;
> +	}
> +
> +	/* The default for this register is all masked */
> +	ret = of_property_read_u32(node, "ti,power-ctrl", &prop);
> +	if (!ret)
> +		pdata->power_ctrl = prop;
> +	else
> +		pdata->power_ctrl = TPS65917_POWER_CTRL_NSLEEP_MASK |
> +					TPS65917_POWER_CTRL_ENABLE1_MASK |
> +					TPS65917_POWER_CTRL_ENABLE2_MASK;
> +	if (i2c->irq)
> +		tps65917_set_pdata_irq_flag(i2c, pdata);

What's the point of tps65917_set_pdata_irq_flag() providing a return
value and then not checking it?

> +	pdata->pm_off = of_property_read_bool(node,
> +			"ti,system-power-controller");
> +}
> +
> +static struct tps65917 *tps65917_dev;

This is never used.

> +static const struct of_device_id of_tps65917_match_tbl[] = {
> +	{
> +		.compatible = "ti,tps65917",
> +	},

This can all sit on one line.

> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, of_tps65917_match_tbl);
> +
> +static int tps65917_i2c_probe(struct i2c_client *i2c,
> +			      const struct i2c_device_id *id)
> +{
> +	struct tps65917 *tps65917;
> +	struct tps65917_platform_data *pdata;
> +	struct device_node *node = i2c->dev.of_node;
> +	int ret = 0, i;

Break these into separate declarations.

Nit: Put them with the other int declaration(s).

> +	unsigned int reg, addr, *features;
> +	int slave;
> +	const struct of_device_id *match;
> +
> +	pdata = dev_get_platdata(&i2c->dev);
> +
> +	if (node && !pdata) {
> +		pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
> +

Remove this line.

> +		if (!pdata)
> +			return -ENOMEM;
> +
> +		tps65917_dt_to_pdata(i2c, pdata);

I'm sure we can fail here.

> +	}
> +
> +	if (!pdata)
> +		return -EINVAL;
> +
> +	tps65917 = devm_kzalloc(&i2c->dev, sizeof(struct tps65917), GFP_KERNEL);
> +	if (tps65917 == NULL)

if (!tps65917)

> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(i2c, tps65917);

Do this at the end after a clean start-up.

> +	tps65917->dev = &i2c->dev;
> +	tps65917->irq = i2c->irq;

Or just save i2c.

> +	match = of_match_device(of_tps65917_match_tbl, &i2c->dev);
> +

Remove this line.

> +	if (!match)
> +		return -ENODATA;
> +
> +	features = (unsigned int *)match->data;

This will be NULL, please remove it.

In fact, why are you even checking for a match?

You only support one device.

> +	for (i = 0; i < TPS65917_NUM_CLIENTS; i++) {
> +		if (i == 0) {
> +			tps65917->i2c_clients[i] = i2c;
> +		} else {
> +			tps65917->i2c_clients[i] =
> +					i2c_new_dummy(i2c->adapter,
> +						      i2c->addr + i);
> +			if (!tps65917->i2c_clients[i]) {
> +				dev_err(tps65917->dev,
> +					"can't attach client %d\n", i);
> +				ret = -ENOMEM;
> +				goto err_i2c;
> +			}
> +			tps65917->i2c_clients[i]->dev.of_node = of_node_get(node);
> +		}

New line here.

> +		tps65917->regmap[i] = devm_regmap_init_i2c(tps65917->i2c_clients[i],
> +							   &tps65917_regmap_config[i]);
> +		if (IS_ERR(tps65917->regmap[i])) {
> +			ret = PTR_ERR(tps65917->regmap[i]);
> +			dev_err(tps65917->dev,
> +				"Failed to allocate regmap %d, err: %d\n",
> +				i, ret);
> +			goto err_i2c;
> +		}
> +	}
> +
> +	if (!tps65917->irq) {
> +		dev_warn(tps65917->dev, "IRQ missing: skipping irq request\n");
> +		goto no_irq;
> +	}
> +
> +	/* Change interrupt line output polarity */
> +	if (pdata->irq_flags & IRQ_TYPE_LEVEL_HIGH)
> +		reg = TPS65917_POLARITY_CTRL_INT_POLARITY;
> +	else
> +		reg = 0;
> +	ret = tps65917_update_bits(tps65917, TPS65917_PU_PD_OD_BASE,
> +				   TPS65917_POLARITY_CTRL,
> +				   TPS65917_POLARITY_CTRL_INT_POLARITY, reg);

Do you need to do this if reg == 0?

> +	if (ret < 0) {
> +		dev_err(tps65917->dev, "POLARITY_CTRL updat failed: %d\n", ret);
> +		goto err_i2c;
> +	}
> +
> +	/* Change IRQ into clear on read mode for efficiency */
> +	slave = TPS65917_BASE_TO_SLAVE(TPS65917_INTERRUPT_BASE);
> +	addr = TPS65917_BASE_TO_REG(TPS65917_INTERRUPT_BASE, TPS65917_INT_CTRL);
> +	reg = TPS65917_INT_CTRL_INT_CLEAR;
> +
> +	regmap_write(tps65917->regmap[slave], addr, reg);
> +
> +	ret = regmap_add_irq_chip(tps65917->regmap[slave], tps65917->irq,
> +				  IRQF_ONESHOT | pdata->irq_flags, 0,
> +				  &tps65917_irq_chip,
> +				  &tps65917->irq_data);
> +	if (ret < 0)
> +		goto err_i2c;
> +
> +no_irq:
> +	slave = TPS65917_BASE_TO_SLAVE(TPS65917_PU_PD_OD_BASE);
> +	addr = TPS65917_BASE_TO_REG(TPS65917_PU_PD_OD_BASE,
> +				    TPS65917_PRIMARY_SECONDARY_PAD1);
> +
> +	if (pdata->mux_from_pdata) {
> +		reg = pdata->pad1;
> +		ret = regmap_write(tps65917->regmap[slave], addr, reg);
> +		if (ret)
> +			goto err_irq;
> +	} else {
> +		ret = regmap_read(tps65917->regmap[slave], addr, &reg);
> +		if (ret)
> +			goto err_irq;
> +	}

Comment this to let us know what you're trying to do.

> +	addr = TPS65917_BASE_TO_REG(TPS65917_PU_PD_OD_BASE,
> +				    TPS65917_PRIMARY_SECONDARY_PAD2);
> +
> +	if (pdata->mux_from_pdata) {
> +		reg = pdata->pad2;
> +		ret = regmap_write(tps65917->regmap[slave], addr, reg);
> +		if (ret)
> +			goto err_irq;
> +	} else {
> +		ret = regmap_read(tps65917->regmap[slave], addr, &reg);
> +		if (ret)
> +			goto err_irq;
> +	}

Same here.

> +	reg = pdata->power_ctrl;
> +
> +	slave = TPS65917_BASE_TO_SLAVE(TPS65917_PMU_CONTROL_BASE);
> +	addr = TPS65917_BASE_TO_REG(TPS65917_PMU_CONTROL_BASE,
> +				    TPS65917_POWER_CTRL);
> +
> +	ret = regmap_write(tps65917->regmap[slave], addr, reg);
> +	if (ret)
> +		goto err_irq;

And here.

> +	/*
> +	 * If we are probing with DT do this the DT way and return here
> +	 * otherwise continue and add devices using mfd helpers.

MFD

> +	 */
> +	if (node) {
> +		ret = of_platform_populate(node, NULL, NULL, &i2c->dev);

What is it you're registering here?  I don't see any child devices
anywhere.

> +		if (ret < 0)
> +			goto err_irq;
> +		else if (pdata->pm_off && !pm_power_off)

No need for the else.

> +			tps65917_dev = tps65917;

What does this do?

> +	}
> +
> +	return ret;

Where does it continue and add devices using the MFD helpers?

> +err_irq:
> +	regmap_del_irq_chip(tps65917->irq, tps65917->irq_data);
> +err_i2c:
> +	for (i = 1; i < TPS65917_NUM_CLIENTS; i++) {
> +		if (tps65917->i2c_clients[i])
> +			i2c_unregister_device(tps65917->i2c_clients[i]);
> +	}

New line here.

> +	return ret;
> +}
> +
> +static int tps65917_i2c_remove(struct i2c_client *i2c)
> +{
> +	struct tps65917 *tps65917 = i2c_get_clientdata(i2c);
> +	int i;
> +
> +	regmap_del_irq_chip(tps65917->irq, tps65917->irq_data);
> +
> +	for (i = 1; i < TPS65917_NUM_CLIENTS; i++) {
> +		if (tps65917->i2c_clients[i])
> +			i2c_unregister_device(tps65917->i2c_clients[i]);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id tps65917_i2c_id[] = {
> +	{ "tps65917", },
> +};
> +MODULE_DEVICE_TABLE(i2c, tps65917_i2c_id);
> +
> +static struct i2c_driver tps65917_i2c_driver = {
> +	.driver = {
> +		   .name = "tps65917",
> +		   .of_match_table = of_tps65917_match_tbl,

of_match_ptr()

> +		   .owner = THIS_MODULE,
> +	},
> +	.probe = tps65917_i2c_probe,
> +	.remove = tps65917_i2c_remove,
> +	.id_table = tps65917_i2c_id,
> +};
> +
> +static int __init tps65917_i2c_init(void)
> +{
> +	return i2c_add_driver(&tps65917_i2c_driver);
> +}
> +/* init early so consumer devices can complete system boot */

Defer?

> +subsys_initcall(tps65917_i2c_init);
> +
> +static void __exit tps65917_i2c_exit(void)
> +{
> +	i2c_del_driver(&tps65917_i2c_driver);
> +}
> +module_exit(tps65917_i2c_exit);
> +
> +MODULE_AUTHOR("J Keerthy <j-keerthy@xxxxxx>");
> +MODULE_DESCRIPTION("TPS65917 chip family multi-function driver");

Multi-Function Driver

> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/tps65917.h b/include/linux/mfd/tps65917.h
> new file mode 100644
> index 0000000..8232e22
> --- /dev/null
> +++ b/include/linux/mfd/tps65917.h
> @@ -0,0 +1,1509 @@
> +/*
> + * TI TPS65917
> + *
> + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + */
> +
> +#ifndef __LINUX_MFD_TPS65917_H
> +#define __LINUX_MFD_TPS65917_H
> +
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +
> +#define TPS65917_NUM_CLIENTS		3
> +
> +/* The ID_REVISION NUMBERS */
> +#define TPS65917_CHIP_ID			0xC035
> +#define TPS65917_RESERVED -1

Line up with tabs.

> +struct tps65917 {
> +	struct device *dev;
> +
> +	struct i2c_client *i2c_clients[TPS65917_NUM_CLIENTS];
> +	struct regmap *regmap[TPS65917_NUM_CLIENTS];
> +
> +	/* Stored chip id */
> +	int id;

Where is this used?

> +	struct tps65917_pmic *pmic;
> +
> +	/* IRQ Data */
> +	int irq;
> +	u32 irq_mask;
> +	/* mutext for irq */
> +	struct mutex irq_lock;
> +	struct regmap_irq_chip_data *irq_data;
> +};
> +
> +struct tps65917_reg_init {
> +	/* warm_rest controls the voltage levels after a warm reset
> +	 *
> +	 * 0: reload default values from OTP on warm reset
> +	 * 1: maintain voltage from VSEL on warm reset
> +	 */

Unusual looking comment, please correct.

> +	int warm_reset;

Looks like a bool to me.

> +	/* roof_floor controls whether the regulator uses the i2c style
> +	 * of DVS or uses the method where a GPIO or other control method is
> +	 * attached to the NSLEEP/ENABLE1/ENABLE2 pins
> +	 *
> +	 * For SMPS
> +	 *
> +	 * 0: i2c selection of voltage
> +	 * 1: pin selection of voltage.
> +	 *
> +	 * For LDO unused
> +	 */

Same here.  Top line should not be populated.

> +	int roof_floor;

Only two values is a bool.

> +	/* sleep_mode is the mode loaded to MODE_SLEEP bits as defined in
> +	 * the data sheet.
> +	 *
> +	 * For SMPS
> +	 *
> +	 * 0: Off
> +	 * 1: AUTO
> +	 * 2: ECO
> +	 * 3: Forced PWM
> +	 *
> +	 * For LDO
> +	 *
> +	 * 0: Off
> +	 * 1: On
> +	 */
> +	int mode_sleep;
> +
> +	/* voltage_sel is the bitfield loaded onto the SMPSX_VOLTAGE
> +	 * register. Set this is the default voltage set in OTP needs
> +	 * to be overridden.
> +	 */
> +	u8 vsel;
> +};
> +
> +enum tps65917_regulators {
> +	/* SMPS regulators */
> +	TPS65917_REG_SMPS1,
> +	TPS65917_REG_SMPS2,
> +	TPS65917_REG_SMPS3,
> +	TPS65917_REG_SMPS4,
> +	TPS65917_REG_SMPS5,
> +	/* LDO regulators */
> +	TPS65917_REG_LDO1,
> +	TPS65917_REG_LDO2,
> +	TPS65917_REG_LDO3,
> +	TPS65917_REG_LDO4,
> +	TPS65917_REG_LDO5,
> +	TPS65917_REG_REGEN1,
> +	TPS65917_REG_REGEN2,
> +	TPS65917_REG_REGEN3,
> +
> +	/* Total number of regulators */
> +	TPS65917_NUM_REGS,
> +};
> +
> +struct tps65917_pmic_platform_data {
> +	/* An array of pointers to regulator init data indexed by regulator
> +	 * ID
> +	 */

Odd multi-line comments throughout.

> +	struct regulator_init_data *reg_data[TPS65917_NUM_REGS];
> +
> +	/* An array of pointers to structures containing sleep mode and DVS
> +	 * configuration for regulators indexed by ID
> +	 */
> +	struct tps65917_reg_init *reg_init[TPS65917_NUM_REGS];
> +};
> +
> +
> +struct tps65917_platform_data {
> +	int irq_flags;
> +	int gpio_base;
> +
> +	/* bit value to be loaded to the POWER_CTRL register */
> +	u8 power_ctrl;
> +
> +	/*
> +	 * boolean to select if we want to configure muxing here
> +	 * then the two value to load into the registers if true
> +	 */
> +	int mux_from_pdata;
> +	u8 pad1, pad2;
> +	bool pm_off;
> +
> +	struct tps65917_pmic_platform_data *pmic_pdata;
> +};
> +
> +/* Define the tps65917 IRQ numbers */
> +enum tps65917_irqs {
> +	/* INT1 registers */
> +	TPS65917_RESERVED1,
> +	TPS65917_PWRON_IRQ,
> +	TPS65917_LONG_PRESS_KEY_IRQ,
> +	TPS65917_RESERVED2,
> +	TPS65917_PWRDOWN_IRQ,
> +	TPS65917_HOTDIE_IRQ,
> +	TPS65917_VSYS_MON_IRQ,
> +	TPS65917_RESERVED3,
> +	/* INT2 registers */
> +	TPS65917_RESERVED4,
> +	TPS65917_OTP_ERROR_IRQ,
> +	TPS65917_WDT_IRQ,
> +	TPS65917_RESERVED5,
> +	TPS65917_RESET_IN_IRQ,
> +	TPS65917_FSD_IRQ,
> +	TPS65917_SHORT_IRQ,
> +	TPS65917_RESERVED6,
> +	/* INT3 registers */
> +	TPS65917_GPADC_AUTO_0_IRQ,
> +	TPS65917_GPADC_AUTO_1_IRQ,
> +	TPS65917_GPADC_EOC_SW_IRQ,
> +	TPS65917_RESREVED6,
> +	TPS65917_RESERVED7,
> +	TPS65917_RESERVED8,
> +	TPS65917_RESERVED9,
> +	TPS65917_VBUS_IRQ,
> +	/* INT4 registers */
> +	TPS65917_GPIO_0_IRQ,
> +	TPS65917_GPIO_1_IRQ,
> +	TPS65917_GPIO_2_IRQ,
> +	TPS65917_GPIO_3_IRQ,
> +	TPS65917_GPIO_4_IRQ,
> +	TPS65917_GPIO_5_IRQ,
> +	TPS65917_GPIO_6_IRQ,
> +	TPS65917_RESERVED10,
> +	/* Total Number IRQs */
> +	TPS65917_NUM_IRQ,
> +};
> +
> +/* External controll signal name */

Spelling.

> +enum {
> +	TPS65917_EXT_CONTROL_ENABLE1      = 0x1,
> +	TPS65917_EXT_CONTROL_ENABLE2      = 0x2,
> +	TPS65917_EXT_CONTROL_NSLEEP       = 0x4,
> +};
> +
> +/*
> + * TPS65917 device resources can be controlled externally for
> + * enabling/disabling it rather than register write through i2c.
> + * Add the external controlled requestor ID for different resources.
> + */
> +enum tps65917_external_requestor_id {
> +	TPS65917_EXTERNAL_REQSTR_ID_REGEN1,
> +	TPS65917_EXTERNAL_REQSTR_ID_REGEN2,
> +	TPS65917_EXTERNAL_REQSTR_ID_REGEN3,
> +	TPS65917_EXTERNAL_REQSTR_ID_SMPS1,
> +	TPS65917_EXTERNAL_REQSTR_ID_SMPS2,
> +	TPS65917_EXTERNAL_REQSTR_ID_SMPS3,
> +	TPS65917_EXTERNAL_REQSTR_ID_SMPS4,
> +	TPS65917_EXTERNAL_REQSTR_ID_SMPS5,
> +	TPS65917_EXTERNAL_REQSTR_ID_LDO1,
> +	TPS65917_EXTERNAL_REQSTR_ID_LDO2,
> +	TPS65917_EXTERNAL_REQSTR_ID_LDO3,
> +	TPS65917_EXTERNAL_REQSTR_ID_LDO4,
> +	TPS65917_EXTERNAL_REQSTR_ID_LDO5,
> +	/* Last entry */
> +	TPS65917_EXTERNAL_REQSTR_ID_MAX,
> +};
> +
> +struct tps65917_pmic {
> +	struct tps65917 *tps65917;
> +	struct device *dev;
> +	struct regulator_desc desc[TPS65917_NUM_REGS];
> +	struct regulator_dev *rdev[TPS65917_NUM_REGS];
> +	/* pmic mutex */
> +	struct mutex mutex;
> +	int smps12;
> +	int range[TPS65917_REG_SMPS5];
> +	unsigned int ramp_delay[TPS65917_REG_SMPS5];
> +	unsigned int current_reg_mode[TPS65917_REG_SMPS5];
> +};
> +
> +/* helper macro to get correct slave number */
> +#define TPS65917_BASE_TO_SLAVE(x)		((x >> 8) - 1)
> +#define TPS65917_BASE_TO_REG(x, y)	((x & 0xff) + y)
> +
> +/* Base addresses of IP blocks in TPS65917 */
> +#define TPS65917_SMPS_DVS_BASE					0x20
> +#define TPS65917_VALIDITY_BASE					0x118
> +#define TPS65917_SMPS_BASE					0x120
> +#define TPS65917_LDO_BASE						0x150
> +#define TPS65917_DVFS_BASE					0x180
> +#define TPS65917_PMU_CONTROL_BASE					0x1A0
> +#define TPS65917_RESOURCE_BASE					0x1D4
> +#define TPS65917_PU_PD_OD_BASE					0x1F0
> +#define TPS65917_LED_BASE						0x200
> +#define TPS65917_INTERRUPT_BASE					0x210
> +#define TPS65917_GPIO_BASE					0x280
> +#define TPS65917_GPADC_BASE					0x2C0
> +#define TPS65917_TRIM_GPADC_BASE					0x3CD
> +
> +/* Registers for function BACKUP */
> +#define TPS65917_BACKUP0						0x0
> +#define TPS65917_BACKUP1						0x1
> +#define TPS65917_BACKUP2						0x2
> +#define TPS65917_BACKUP3						0x3
> +#define TPS65917_BACKUP4						0x4
> +#define TPS65917_BACKUP5						0x5
> +#define TPS65917_BACKUP6						0x6
> +#define TPS65917_BACKUP7						0x7
> +
> +/* Bit definitions for BACKUP0 */
> +#define TPS65917_BACKUP0_BACKUP_MASK				0xff
> +#define TPS65917_BACKUP0_BACKUP_SHIFT				0
> +
> +/* Bit definitions for BACKUP1 */
> +#define TPS65917_BACKUP1_BACKUP_MASK				0xff
> +#define TPS65917_BACKUP1_BACKUP_SHIFT				0
> +
> +/* Bit definitions for BACKUP2 */
> +#define TPS65917_BACKUP2_BACKUP_MASK				0xff
> +#define TPS65917_BACKUP2_BACKUP_SHIFT				0
> +
> +/* Bit definitions for BACKUP3 */
> +#define TPS65917_BACKUP3_BACKUP_MASK				0xff
> +#define TPS65917_BACKUP3_BACKUP_SHIFT				0
> +
> +/* Bit definitions for BACKUP4 */
> +#define TPS65917_BACKUP4_BACKUP_MASK				0xff
> +#define TPS65917_BACKUP4_BACKUP_SHIFT				0
> +
> +/* Bit definitions for BACKUP5 */
> +#define TPS65917_BACKUP5_BACKUP_MASK				0xff
> +#define TPS65917_BACKUP5_BACKUP_SHIFT				0
> +
> +/* Bit definitions for BACKUP6 */
> +#define TPS65917_BACKUP6_BACKUP_MASK				0xff
> +#define TPS65917_BACKUP6_BACKUP_SHIFT				0
> +
> +/* Bit definitions for BACKUP7 */
> +#define TPS65917_BACKUP7_BACKUP_MASK				0xff
> +#define TPS65917_BACKUP7_BACKUP_SHIFT				0

If they do not differ, remove the number and consolidate:

/* Bit definitions for BACKUP{0-7} */
#define TPS65917_BACKUP_BACKUP_MASK				0xff
#define TPS65917_BACKUP_BACKUP_SHIFT				0

> +/* Registers for function SMPS */
> +#define TPS65917_SMPS1_CTRL					0x0
> +#define TPS65917_SMPS1_FORCE					0x2
> +#define TPS65917_SMPS1_VOLTAGE					0x3
> +#define TPS65917_SMPS2_CTRL					0x4
> +#define TPS65917_SMPS2_FORCE					0x6
> +#define TPS65917_SMPS2_VOLTAGE					0x7
> +#define TPS65917_SMPS3_CTRL					0xC
> +#define TPS65917_SMPS3_FORCE					0xE
> +#define TPS65917_SMPS3_VOLTAGE					0xF
> +#define TPS65917_SMPS4_CTRL					0x10
> +#define TPS65917_SMPS4_VOLTAGE					0x13
> +#define TPS65917_SMPS5_CTRL					0x18
> +#define TPS65917_SMPS5_VOLTAGE					0x1B
> +#define TPS65917_SMPS_CTRL					0x24
> +#define TPS65917_SMPS_PD_CTRL					0x25
> +#define TPS65917_SMPS_THERMAL_EN				0x27
> +#define TPS65917_SMPS_THERMAL_STATUS				0x28
> +#define TPS65917_SMPS_SHORT_STATUS				0x29
> +#define TPS65917_SMPS_NEGATIVE_CURRENT_LIMIT_EN			0x2A
> +#define TPS65917_SMPS_POWERGOOD_MASK1				0x2B
> +#define TPS65917_SMPS_POWERGOOD_MASK2				0x2C
> +
> +/* Bit definitions for SMPS1_CTRL */
> +#define TPS65917_SMPS1_CTRL_WR_S				0x80
> +#define TPS65917_SMPS1_CTRL_WR_S_SHIFT				7
> +#define TPS65917_SMPS1_CTRL_ROOF_FLOOR_EN			0x40
> +#define TPS65917_SMPS1_CTRL_ROOF_FLOOR_EN_SHIFT			6
> +#define TPS65917_SMPS1_CTRL_STATUS_MASK				0x30
> +#define TPS65917_SMPS1_CTRL_STATUS_SHIFT			4
> +#define TPS65917_SMPS1_CTRL_MODE_SLEEP_MASK			0x0c
> +#define TPS65917_SMPS1_CTRL_MODE_SLEEP_SHIFT			2
> +#define TPS65917_SMPS1_CTRL_MODE_ACTIVE_MASK			0x03
> +#define TPS65917_SMPS1_CTRL_MODE_ACTIVE_SHIFT			0

Pick a base and stick with it.  I suggest hex throughout.

[...]

> +/* Bit definitions for SMPS_PLL_CTRL */
> +
> +#define TPS65917_SMPS_PLL_CTRL_PLL_EN_PLL_BYPASS_SHIFT		0x8
> +#define TPS65917_SMPS_PLL_CTRL_PLL_PLL_EN_BYPASS		3
> +#define TPS65917_SMPS_PLL_CTRL_PLL_PLL_BYPASS_CLK_SHIFT		0x4
> +#define TPS65917_SMPS_PLL_CTRL_PLL_PLL_BYPASS_CLK		2
> +
> +

Remove this line.

> +/* Registers for function LDO */
> +#define TPS65917_LDO1_CTRL					0x0
> +#define TPS65917_LDO1_VOLTAGE					0x1
> +#define TPS65917_LDO2_CTRL					0x2
> +#define TPS65917_LDO2_VOLTAGE					0x3
> +#define TPS65917_LDO3_CTRL					0x4
> +#define TPS65917_LDO3_VOLTAGE					0x5
> +#define TPS65917_LDO4_CTRL					0xE
> +#define TPS65917_LDO4_VOLTAGE					0xF

Also standardise the number of digits represented and either
capitalise none or all of the hex letters.

[...]

> +static inline int tps65917_read(struct tps65917 *tps65917, unsigned int base,
> +				unsigned int reg, unsigned int *val)
> +{
> +	unsigned int addr =  TPS65917_BASE_TO_REG(base, reg);

Extra ' '.

> +	int slave_id = TPS65917_BASE_TO_SLAVE(base);
> +
> +	return regmap_read(tps65917->regmap[slave_id], addr, val);
> +}
> +
> +static inline int tps65917_write(struct tps65917 *tps65917, unsigned int base,
> +				 unsigned int reg, unsigned int value)
> +{
> +	unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
> +	int slave_id = TPS65917_BASE_TO_SLAVE(base);
> +
> +	return regmap_write(tps65917->regmap[slave_id], addr, value);
> +}
> +
> +static inline int tps65917_bulk_write(struct tps65917 *tps65917,
> +				      unsigned int base,
> +				      unsigned int reg, const void *val,
> +				      size_t val_count)
> +{
> +	unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
> +	int slave_id = TPS65917_BASE_TO_SLAVE(base);
> +
> +	return regmap_bulk_write(tps65917->regmap[slave_id], addr,
> +				 val, val_count);
> +}
> +
> +static inline int tps65917_bulk_read(struct tps65917 *tps65917,
> +				     unsigned int base,
> +				     unsigned int reg, void *val,
> +				     size_t val_count)
> +{
> +	unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
> +	int slave_id = TPS65917_BASE_TO_SLAVE(base);
> +
> +	return regmap_bulk_read(tps65917->regmap[slave_id], addr,
> +				val, val_count);
> +}
> +
> +static inline int tps65917_update_bits(struct tps65917 *tps65917,
> +				       unsigned int base, unsigned int reg,
> +				       unsigned int mask, unsigned int val)
> +{
> +	unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
> +	int slave_id = TPS65917_BASE_TO_SLAVE(base);
> +
> +	return regmap_update_bits(tps65917->regmap[slave_id], addr, mask, val);
> +}
> +
> +static inline int tps65917_irq_get_virq(struct tps65917 *tps65917, int irq)
> +{
> +	return regmap_irq_get_virq(tps65917->irq_data, irq);
> +}

This is quite a lot of overhead.  Are you sure you require them?

> +int tps65917_ext_control_req_config(struct tps65917 *tps65917,
> +				    enum tps65917_external_requestor_id ext_control_req_id,
> +				    int ext_ctrl, bool enable);
> +
> +#endif /*  __LINUX_MFD_TPS65917_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux