Re: [RFC PATCH v10 6/9] media: tegra: Add Tegra210 Video input driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/25/20 4:13 PM, Dmitry Osipenko wrote:
External email: Use caution opening links or attachments


24.04.2020 06:55, Sowjanya Komatineni пишет:
+static int __maybe_unused vi_runtime_resume(struct device *dev)
+{
+     struct tegra_vi *vi = dev_get_drvdata(dev);
+     int ret;
+
+     ret = regulator_enable(vi->vdd);
+     if (ret) {
+             dev_err(dev, "failed to enable VDD supply: %d\n", ret);
+             return ret;
+     }
+
+     ret = clk_set_rate(vi->clk, vi->soc->vi_max_clk_hz);
+     if (ret) {
+             dev_err(dev, "failed to set vi clock rate: %d\n", ret);
+             goto disable_vdd;
+     }
Isn't setting clock rate using assigned-clocks in a device-tree enough?
Could you please clarify why this vi_max_clk_hz is needed?

Max clock rate with sensor support will be 998Mhz.

Later when sensor support is added, based on TPG or Sensor mode clock rate will be set here





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux