[PATCH] dt-bindings: usb: dwc2: add power-domains property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'power-domains' for Rockchip px30 usb nodes,
so add them to 'dwc2.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml

Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index fb2f62aef..9352a8ef6 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -78,6 +78,9 @@ properties:
   phy-names:
     const: usb2-phy
 
+  power-domains:
+    maxItems: 1
+
   vbus-supply:
     description: reference to the VBUS regulator. Depending on the current mode
       this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
-- 
2.11.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux