Now that we have the DT validation in place, let's convert the device tree
bindings for the Atheros AR71XX over to a YAML schemas.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/net/qca,ar71xx.txt | 45 ----
.../devicetree/bindings/net/qca,ar71xx.yaml | 216 ++++++++++++++++++
2 files changed, 216 insertions(+), 45 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/qca,ar71xx.txt
create mode 100644 Documentation/devicetree/bindings/net/qca,ar71xx.yaml
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.txt b/Documentation/devicetree/bindings/net/qca,ar71xx.txt
deleted file mode 100644
index 2a33e71ba72b8..0000000000000
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Required properties:
-- compatible: Should be "qca,<soc>-eth". Currently support compatibles are:
- qca,ar7100-eth - Atheros AR7100
- qca,ar7240-eth - Atheros AR7240
- qca,ar7241-eth - Atheros AR7241
- qca,ar7242-eth - Atheros AR7242
- qca,ar9130-eth - Atheros AR9130
- qca,ar9330-eth - Atheros AR9330
- qca,ar9340-eth - Atheros AR9340
- qca,qca9530-eth - Qualcomm Atheros QCA9530
- qca,qca9550-eth - Qualcomm Atheros QCA9550
- qca,qca9560-eth - Qualcomm Atheros QCA9560
-
-- reg : Address and length of the register set for the device
-- interrupts : Should contain eth interrupt
-- phy-mode : See ethernet.txt file in the same directory
-- clocks: the clock used by the core
-- clock-names: the names of the clock listed in the clocks property. These are
- "eth" and "mdio".
-- resets: Should contain phandles to the reset signals
-- reset-names: Should contain the names of reset signal listed in the resets
- property. These are "mac" and "mdio"
-
-Optional properties:
-- phy-handle : phandle to the PHY device connected to this device.
-- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
- Use instead of phy-handle.
-
-Optional subnodes:
-- mdio : specifies the mdio bus, used as a container for phy nodes
- according to phy.txt in the same directory
-
-Example:
-
-ethernet@1a000000 {
- compatible = "qca,ar9330-eth";
- reg = <0x1a000000 0x200>;
- interrupts = <5>;
- resets = <&rst 13>, <&rst 23>;
- reset-names = "mac", "mdio";
- clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_MDIO>;
- clock-names = "eth", "mdio";
-
- phy-mode = "gmii";
-};
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
new file mode 100644
index 0000000000000..f99a5aabe9232
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -0,0 +1,216 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,ar71xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCA AR71XX MAC
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+maintainers:
+ - Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qca,ar7100-eth # Atheros AR7100
+ - qca,ar7240-eth # Atheros AR7240
+ - qca,ar7241-eth # Atheros AR7241
+ - qca,ar7242-eth # Atheros AR7242
+ - qca,ar9130-eth # Atheros AR9130
+ - qca,ar9330-eth # Atheros AR9330
+ - qca,ar9340-eth # Atheros AR9340
+ - qca,qca9530-eth # Qualcomm Atheros QCA9530
+ - qca,qca9550-eth # Qualcomm Atheros QCA9550
+ - qca,qca9560-eth # Qualcomm Atheros QCA9560
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#address-cells':
+ description: number of address cells for the MDIO bus
+ const: 1
+
+ '#size-cells':
+ description: number of size cells on the MDIO bus
+ const: 0
+
+ clocks:
+ items:
+ - description: MAC main clock
+ - description: MDIO clock
+
+ clock-names:
+ items:
+ - const: eth
+ - const: mdio
+
+ resets:
+ items:
+ - description: MAC reset
+ - description: MDIO reset
+
+ reset-names:
+ items:
+ - const: mac
+ - const: mdio
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - phy-mode
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+examples:
+ # Lager board
+ - |
+ eth0: ethernet@19000000 {
+ compatible = "qca,ar9330-eth";
+ reg = <0x19000000 0x200>;
+ interrupts = <4>;
+ resets = <&rst 9>, <&rst 22>;
+ reset-names = "mac", "mdio";
+ clocks = <&pll 1>, <&pll 2>;
+ clock-names = "eth", "mdio";
+ qca,ethcfg = <ðcfg>;
+ phy-mode = "mii";
+ phy-handle = <&phy_port4>;
+ };
+
+ eth1: ethernet@1a000000 {
+ compatible = "qca,ar9330-eth";
+ reg = <0x1a000000 0x200>;
+ interrupts = <5>;
+ resets = <&rst 13>, <&rst 23>;
+ reset-names = "mac", "mdio";
+ clocks = <&pll 1>, <&pll 2>;
+ clock-names = "eth", "mdio";
+
+ phy-mode = "gmii";
+
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch10: switch@10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qca,ar9331-switch";
+ reg = <0x10>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+
+ interrupt-parent = <&miscintc>;
+ interrupts = <12>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch_port0: port@0 {
+ reg = <0x0>;
+ label = "cpu";
+ ethernet = <ð1>;
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ switch_port1: port@1 {
+ reg = <0x1>;
+ phy-handle = <&phy_port0>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port2: port@2 {
+ reg = <0x2>;
+ phy-handle = <&phy_port1>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port3: port@3 {
+ reg = <0x3>;
+ phy-handle = <&phy_port2>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port4: port@4 {
+ reg = <0x4>;
+ phy-handle = <&phy_port3>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&switch10>;
+
+ phy_port0: phy@0 {
+ reg = <0x0>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port1: phy@1 {
+ reg = <0x1>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port2: phy@2 {
+ reg = <0x2>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port3: phy@3 {
+ reg = <0x3>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port4: phy@4 {
+ reg = <0x4>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+ };
--
2.26.1
