Exynos4412-trats2 board have light/proximity sensor.
This patch add cm36651 light/ proximity sensor node for exynos4412.
cm36651 is required properties as below.
- Use i2c-gpio for cm36651 sensor.
- Use fixed regulator for the IR LED.
It is a part of the cm36651 for proximity detection.
- cm36651 is i2c device driver so need to use i2c-gpio driver.
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Signed-off-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
---
Changes in v3:
- Remove "status" property.
- Change gpio/interrupt specified.
Changes in v2:
- None.
---
arch/arm/boot/dts/exynos4412-trats2.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index f621fd9..dda7517 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -21,6 +21,7 @@
aliases {
i2c9 = &i2c_ak8975;
+ i2c10 = &i2c_cm36651;
};
memory {
@@ -98,6 +99,16 @@
enable-active-high;
regulator-always-on;
};
+
+ ps_als_reg: voltage-regulator-5 {
+ compatible = "regulator-fixed";
+ regulator-name = "LED_A_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpj0 5 0>;
+ enable-active-high;
+ };
+
};
gpio-keys {
@@ -558,6 +569,22 @@
};
};
+ i2c_cm36651: i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cm36651@18 {
+ compatible = "capella,cm36651";
+ reg = <0x18>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <2 2>;
+ vled-supply = <&ps_als_reg>;
+ };
+ };
+
spi_1: spi@13930000 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
