Hi Adrian, On Wed, Apr 22, 2020 at 03:58:33AM +0300, Laurent Pinchart wrote: > On Tue, Apr 21, 2020 at 07:16:07PM +0300, Adrian Ratiu wrote: > > This provides an example DT binding for the MIPI DSI host controller > > present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP. > > > > Cc: Rob Herring <robh@xxxxxxxxxx> > > Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > > Cc: Fabio Estevam <festevam@xxxxxxxxx> > > Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > Cc: devicetree@xxxxxxxxxxxxxxx > > Tested-by: Adrian Pop <pop.adrian61@xxxxxxxxx> > > Tested-by: Arnaud Ferraris <arnaud.ferraris@xxxxxxxxxxxxx> > > Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxx> > > Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx> > > Signed-off-by: Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx> > > --- > > Changes since v6: > > - Added ref to the newly created snps,dw-mipi-dsi.yaml (Laurent) > > - Moved *-cells properties outside patternProperties (Laurent) > > - Removed the panel port documentation (Laurent) > > - Wrapped lines at 80 chars, typo fixes, sort includes (Laurent) > > > > Changes since v5: > > - Fixed missing reg warning (Fabio) > > - Updated dt-schema and fixed warnings (Rob) > > > > Changes since v4: > > - Fixed yaml binding to pass `make dt_binding_check dtbs_check` > > and addressed received binding feedback (Rob) > > > > Changes since v3: > > - Added commit message (Neil) > > - Converted to yaml format (Neil) > > - Minor dt node + driver fixes (Rob) > > - Added small panel example to the host controller binding > > > > Changes since v2: > > - Fixed commit tags (Emil) > > --- > > .../display/imx/fsl,mipi-dsi-imx6.yaml | 135 ++++++++++++++++++ > > 1 file changed, 135 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml > > new file mode 100644 > > index 0000000000000..b73e3ae33a852 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml > > @@ -0,0 +1,135 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/imx/fsl,mipi-dsi-imx6.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Freescale i.MX6 DW MIPI DSI Host Controller > > + > > +maintainers: > > + - Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx> > > + > > +description: | > > + The i.MX6 DSI host controller is a Synopsys DesignWare MIPI DSI v1.01 > > + IP block with a companion PHY IP. I forgot to mention, if there's a companion PHY, shouldn't it be referenced from the DT bindings ? > > + > > + These DT bindings follow the Synopsys DW MIPI DSI bindings defined in > > + Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt with > > + the following device-specific properties. > > + > > +allOf: > > + - $ref: ../bridge/snps,dw-mipi-dsi.yaml# > > + > > +properties: > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + compatible: > > + items: > > + - const: fsl,imx6q-mipi-dsi > > + - const: snps,dw-mipi-dsi > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + clocks: > > + items: > > + - description: Module Clock > > + - description: DSI bus clock > > + > > + clock-names: > > + items: > > + - const: ref > > + - const: pclk > > + > > + fsl,gpr: > > + description: > > + Phandle to the iomuxc-gpr region containing the multiplexer ctrl register. > > + $ref: /schemas/types.yaml#/definitions/phandle > > + > > + ports: > > + type: object > > + description: | > > + A node containing DSI input & output port nodes with endpoint > > + definitions as documented in > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > + Documentation/devicetree/bindings/graph.txt > > + properties: > > + port@0: > > + type: object > > + description: > > + DSI input port node, connected to the ltdc rgb output port. > > + > > + port@1: > > + type: object > > + description: > > + RGB output port node, connected to a panel or a bridge input port. > > Isn't it the other way around, doesn't the bridge take RGB input and > output DSI ? And to be precise, it's not about RGB, but about the input > being parallel interface (DSI will also carry RGB). > > I would add > > required: > - port@0 > - port@1 > > > + > > +additionalProperties: false > > + > > +patternProperties: > > + "^panel@[0-3]$": > > + type: object > > + > > +required: > > + - "#address-cells" > > + - "#size-cells" > > + - compatible > > + - reg > > + - interrupts > > + - clocks > > + - clock-names > > + - ports > > + > > +examples: > > + - |+ > > + #include <dt-bindings/clock/imx6qdl-clock.h> > > + #include <dt-bindings/gpio/gpio.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > + dsi: dsi@21e0000 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi"; > > + reg = <0x021e0000 0x4000>; > > + interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; > > + fsl,gpr = <&gpr>; > > + clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>, > > + <&clks IMX6QDL_CLK_MIPI_IPG>; > > + clock-names = "ref", "pclk"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > port@0 is missing. > > > + port@1 { > > + reg = <1>; > > + dsi_out: endpoint { > > + remote-endpoint = <&panel_in>; > > + }; > > + }; > > + }; > > + > > + panel@0 { > > + compatible = "sharp,ls032b3sx01"; > > + reg = <0>; > > + reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + port@0 { > > + reg = <0>; > > + panel_in: endpoint { > > + remote-endpoint = <&dsi_out>; > > + }; > > + }; > > + }; > > + }; > > + }; > > + > > +... -- Regards, Laurent Pinchart
