Re: [PATCH] ARM: dts: bcm2835-rpi-zero-w: Fix led polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 18 Apr 2020 14:35:22 +0200, Vincent Stehlé <vincent.stehle@xxxxxxxxxxx> wrote:
> The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.
> 
> This has been verified on a board and somewhat confirmed by both the GPIO
> name ("STATUS_LED_N") and the reduced schematics [1].
> 
> [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf
> 
> Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
> Signed-off-by: Vincent Stehlé <vincent.stehle@xxxxxxxxxxx>
> Cc: Stefan Wahren <stefan.wahren@xxxxxxxx>
> Cc: Florian Fainelli <f.fainelli@xxxxxxxxx>
> ---

Applied to devicetree/fixes, thanks!
--
Florian



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux