Add TCSR node and update MSS node to support MSA based Modem boot on SC7180 SoCs. Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx> --- V2: * use memory-region to reference mba/mpss regions [Bjorn] * overload the base remoteproc_mpss node wherever possible [Bjorn] Depends on the following bindings: iommus: https://patchwork.kernel.org/patch/11499603/ spare-regs: https://patchwork.kernel.org/patch/11491425/ arch/arm64/boot/dts/qcom/sc7180-idp.dts | 7 +++++++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 28 +++++++++++++++++++++---- 2 files changed, 31 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 5405cde1a32ef..08f1f04cca734 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -309,6 +309,13 @@ &qupv3_id_1 { status = "okay"; }; +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7180-mss-pil"; + iommus = <&apps_smmu 0x460 0x1>, <&apps_smmu 0x444 0x3>; + memory-region = <&mba_mem &mpss_mem>; +}; + &sdhc_1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 94cead96eade0..5e2618eb1b7fa 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -932,6 +932,11 @@ tcsr_mutex_regs: syscon@1f40000 { reg = <0 0x01f40000 0 0x40000>; }; + tcsr_regs: syscon@1fc0000 { + compatible = "syscon"; + reg = <0 0x01fc0000 0 0x40000>; + }; + tlmm: pinctrl@3500000 { compatible = "qcom,sc7180-pinctrl"; reg = <0 0x03500000 0 0x300000>, @@ -1325,7 +1330,8 @@ pinconf-sd-cd { remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7180-mpss-pas"; - reg = <0 0x04080000 0 0x4040>; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, @@ -1336,19 +1342,33 @@ remoteproc_mpss: remoteproc@4080000 { interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", + "mnoc_axi", "xo"; power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, <&rpmhpd SC7180_CX>, + <&rpmhpd SC7180_MX>, <&rpmhpd SC7180_MSS>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "load_state", "cx", "mx", "mss"; memory-region = <&mpss_mem>; qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,spare-regs = <&tcsr_regs 0xb3e4>; + status = "disabled"; glink-edge { -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
