Am Dienstag, 21. April 2020, 10:29:49 CEST schrieb Chen-Yu Tsai: > On Tue, Apr 21, 2020 at 4:23 PM Heiko Stübner <heiko@xxxxxxxxx> wrote: > > > > Hi ChenYu, > > > > Am Dienstag, 21. April 2020, 05:48:52 CEST schrieb Chen-Yu Tsai: > > > On Fri, Apr 17, 2020 at 2:19 AM Johan Jonker <jbx6244@xxxxxxxxx> wrote: > > > > > > > > 'bus-width' and pinctrl containing the bus-pins > > > > should be in the same file, so add them to > > > > all mmc nodes in 'rk3328.dtsi'. > > > > > > Nope. First of all, pinctrl usage is with pinctrl-N properties, not the > > > pinctrl device, and there are no defaults set for any of the mmc nodes. > > > Second, these are board design specific. For example, boards are free to > > > use just 4 bits for the eMMC if they so desire. So this should be in each > > > board dts file. If a board is missing this property, fix the board. > > > > you are correct that the pinctrl entries are missing from the patches, > > bus-width and pinctrl should be defined in the same file each time, > > but for the whole idea I tend to disagree. > > > > So far every board with a Rockchip socs follows Rockchip's reference design > > for a lot of parts - for example I only see sdmmc nodes with bus-width=4 > > etc. > > > > So the basic idea is to have default pinctrl settings for the settings > > everybody uses predefined ... if a board comes along that needs different > > settings it is free to redefine that. > > I think having a default is a great idea. :) especially for controllers that only ever use the same settings anyway.
