On Fri, 17 Apr 2020 22:43:11 +0200, Linus Walleij wrote: > This adds device tree bindings for the Cypress CY8CTMA140 > touchscreen. > > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: Henrik Rydberg <rydberg@xxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > --- > ChangeLog v1->v4: > - Drop the description of 'reg', it's surplus. > - Set the I2C frequency to the span 100k to 400k instead > of hardcoding 400k. > - Collect Rob's review tag. > --- > .../input/touchscreen/cypress,cy8ctma140.yaml | 72 +++++++++++++++++++ > 1 file changed, 72 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.example.dts:18.22-32.11: Warning (unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.example.dts:18.22-32.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s See https://patchwork.ozlabs.org/patch/1272475 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
