Hello, Here is the 3rd version of the patches to add a devicetree for Akebi96 board. This version simplifies the devicetree according to Masahiro's comment and update patch description. (Thanks!) The Akebi96 is a certified 96boards which is based on Socionext UniPhier LD20 SoC. Most of the part is similar to LD20 reference board, but there are some changes. - MAX3421 USB-SPI chip on SPI port3 (for USB gadget port.) - Simple frame buffer with 1080p fixed resolution. - I2S port which is connected to aout1b instead of aout1. - 3 serial ports, only serial3 has CTS/RTS. - No NAND, only eMMC on the board. - OP-TEE installed firmware. See https://www.96boards.org/product/akebi96/ for details. Thank you, --- Masami Hiramatsu (2): dt-bindings: arm: Add Akebi96 board support arm64: dts: uniphier: Add support for Akebi96 .../bindings/arm/socionext/uniphier.yaml | 1 arch/arm64/boot/dts/socionext/Makefile | 1 .../boot/dts/socionext/uniphier-ld20-akebi96.dts | 190 ++++++++++++++++++++ 3 files changed, 192 insertions(+) create mode 100644 arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts -- Masami Hiramatsu <masami.hiramatsu@xxxxxxxxxx>
