Make RS780E ACPI as a platform driver so we can enable it
by DeviceTree selectively.
Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
---
arch/mips/loongson64/Makefile | 2 +-
drivers/platform/mips/Kconfig | 6 ++
drivers/platform/mips/Makefile | 1 +
.../platform/mips/rs780e-acpi.c | 58 ++++++++++++-------
4 files changed, 46 insertions(+), 21 deletions(-)
rename arch/mips/loongson64/acpi_init.c => drivers/platform/mips/rs780e-acpi.c (70%)
diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile
index 102a19aa92aa..6f81b822aeae 100644
--- a/arch/mips/loongson64/Makefile
+++ b/arch/mips/loongson64/Makefile
@@ -2,7 +2,7 @@
#
# Makefile for Loongson-3 family machines
#
-obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o acpi_init.o dma.o \
+obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o dma.o \
setup.o init.o env.o time.o reset.o \
obj-$(CONFIG_SMP) += smp.o
diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 5e77b0dc5fd6..8ac149173c64 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -24,4 +24,10 @@ config CPU_HWMON
help
Loongson-3A/3B CPU Hwmon (temperature sensor) driver.
+config RS780E_ACPI
+ bool "Loongson RS780E ACPI Controller"
+ depends on MACH_LOONGSON64 || COMPILE_TEST
+ help
+ Loongson RS780E PCH ACPI Controller driver.
+
endif # MIPS_PLATFORM_DEVICES
diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile
index be8146c20dc8..178149098777 100644
--- a/drivers/platform/mips/Makefile
+++ b/drivers/platform/mips/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o
+obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o
diff --git a/arch/mips/loongson64/acpi_init.c b/drivers/platform/mips/rs780e-acpi.c
similarity index 70%
rename from arch/mips/loongson64/acpi_init.c
rename to drivers/platform/mips/rs780e-acpi.c
index 8d7c119ddf91..e5a643b78ac9 100644
--- a/arch/mips/loongson64/acpi_init.c
+++ b/drivers/platform/mips/rs780e-acpi.c
@@ -3,32 +3,23 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
-#define SBX00_ACPI_IO_BASE 0x800
-#define SBX00_ACPI_IO_SIZE 0x100
+static unsigned long acpi_iobase;
-#define ACPI_PM_EVT_BLK (SBX00_ACPI_IO_BASE + 0x00) /* 4 bytes */
-#define ACPI_PM_CNT_BLK (SBX00_ACPI_IO_BASE + 0x04) /* 2 bytes */
-#define ACPI_PMA_CNT_BLK (SBX00_ACPI_IO_BASE + 0x0F) /* 1 byte */
-#define ACPI_PM_TMR_BLK (SBX00_ACPI_IO_BASE + 0x18) /* 4 bytes */
-#define ACPI_GPE0_BLK (SBX00_ACPI_IO_BASE + 0x10) /* 8 bytes */
-#define ACPI_END (SBX00_ACPI_IO_BASE + 0x80)
+#define ACPI_PM_EVT_BLK (acpi_iobase + 0x00) /* 4 bytes */
+#define ACPI_PM_CNT_BLK (acpi_iobase + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK (acpi_iobase + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK (acpi_iobase + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK (acpi_iobase + 0x10) /* 8 bytes */
+#define ACPI_END (acpi_iobase + 0x80)
#define PM_INDEX 0xCD6
#define PM_DATA 0xCD7
#define PM2_INDEX 0xCD0
#define PM2_DATA 0xCD1
-/*
- * SCI interrupt need acpi space, allocate here
- */
-
-static int __init register_acpi_resource(void)
-{
- request_region(SBX00_ACPI_IO_BASE, SBX00_ACPI_IO_SIZE, "acpi");
- return 0;
-}
-
static void pmio_write_index(u16 index, u8 reg, u8 value)
{
outb(reg, index);
@@ -141,11 +132,38 @@ void acpi_registers_setup(void)
pm2_iowrite(0xf8, value);
}
-int __init sbx00_acpi_init(void)
+static int rs780e_acpi_probe(struct platform_device *pdev)
{
- register_acpi_resource();
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!res)
+ return -ENODEV;
+
+ /* SCI interrupt need acpi space, allocate here */
+ if (!request_region(res->start, resource_size(res), "acpi")) {
+ pr_err("RS780E-ACPI: Failed to request IO Region\n");
+ return -EBUSY;
+ }
+
+ acpi_iobase = res->start;
+
acpi_registers_setup();
acpi_hw_clear_status();
return 0;
}
+
+static const struct of_device_id rs780e_acpi_match[] = {
+ { .compatible = "loongson,rs780e-acpi" },
+ {},
+};
+
+static struct platform_driver rs780e_acpi_driver = {
+ .probe = rs780e_acpi_probe,
+ .driver = {
+ .name = "RS780E-ACPI",
+ .of_match_table = rs780e_acpi_match,
+ },
+};
+builtin_platform_driver(rs780e_acpi_driver);
--
2.26.0.rc2
