Re: [PATCH v8 6/7] MIPS: DTS: JZ4780: define node for JZ4780 efuse

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 28, 2020 at 05:00:52PM +0100, H. Nikolaus Schaller wrote:
> From: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
> 
> This patch brings support for the JZ4780 efuse. Currently it only exposes
> a read only access to the entire 8K bits efuse memory and the
> ethernet mac address for the davicom dm9000 chip on the CI20 board.
> 
> It also changes the nemc ranges definition to give the driver
> access to the efuse registers, which are in the middle of the
> nemc reg range.
> 
> Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
> Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
> Signed-off-by: Mathieu Malaterre <malat@xxxxxxxxxx>
> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> ---
>  arch/mips/boot/dts/ingenic/jz4780.dtsi | 19 +++++++++++++++++--
>  1 file changed, 17 insertions(+), 2 deletions(-)

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux