These ports are compatible with NS8250 and handled by the same driver. Get rid of the extra document that fails to document the properties that are actually supported. Signed-off-by: Lubomir Rintel <lkundrak@xxxxx> --- Documentation/devicetree/bindings/serial/8250.txt | 2 ++ Documentation/devicetree/bindings/serial/mrvl-serial.txt | 4 ---- 2 files changed, 2 insertions(+), 4 deletions(-) delete mode 100644 Documentation/devicetree/bindings/serial/mrvl-serial.txt diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 55700f20f6ee8..a543702859e2f 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -26,6 +26,8 @@ Required properties: - "aspeed,ast2400-vuart" - "aspeed,ast2500-vuart" - "nuvoton,npcm750-uart" + - "mrvl,mmp-uart" + - "mrvl,pxa-uart" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. diff --git a/Documentation/devicetree/bindings/serial/mrvl-serial.txt b/Documentation/devicetree/bindings/serial/mrvl-serial.txt deleted file mode 100644 index d744340de887c..0000000000000 --- a/Documentation/devicetree/bindings/serial/mrvl-serial.txt +++ /dev/null @@ -1,4 +0,0 @@ -PXA UART controller - -Required properties: -- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart". -- 2.26.0
