[PATCH v5 0/1] Add rga to rk322x device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patchset aims to enable use of Rockchip's RGA, a 2D raster
graphic acceleration unit, on rk322x based devices.

Changes in v5:
  - Remove the patch to rockchip-rga device tree binding documentation
    as Johan Jonker has already included mention of "rockchip,rk3228-rga"
    since the conversion to YAML.

  - Remove the assignment of "disabled" to the rga "status" attribute
    in rk322x.dtsi, as Heiko Stuebner has said:
      "no status for soc internal components without any board-specifics"

  - Remove the now unnecessary patch to enable rga for the rk3229-xms6
    board.

Changes in v4:
  - Add a compatible value entry for the rk3228 to the rockchip-rga
    device tree binding documentation.

Changes in v3:
  - Relocate rga node to the correct position in rk322x.dtsi, as
    indicated by Johan Jonker.

Changes in v2:
  - Remove unnecessary "rockchip,rk3228-rga" device tree compatibility
    string patch, as advised by Ezequiel Garcia.

  - Use both "rockchip,rk3228-rga" and "rockchip,rk3288-rga" in the
    rga node's compatibility property, as suggested by Heiko Stuebner.

Justin Swartz (1):
  ARM: dts: rockchip: add rga node for rk322x

 arch/arm/boot/dts/rk322x.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux