Dne četrtek, 16. april 2020 ob 21:18:29 CEST je Florian Fainelli napisal(a):
> On 4/16/2020 11:57 AM, Jernej Skrabec wrote:
> > AC200 MFD IC supports Fast Ethernet PHY. Add a driver for it.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > ---
> >
> > drivers/net/phy/Kconfig | 7 ++
> > drivers/net/phy/Makefile | 1 +
> > drivers/net/phy/ac200.c | 206 +++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 214 insertions(+)
> > create mode 100644 drivers/net/phy/ac200.c
> >
> > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> > index 3fa33d27eeba..16af69f69eaf 100644
> > --- a/drivers/net/phy/Kconfig
> > +++ b/drivers/net/phy/Kconfig
> > @@ -288,6 +288,13 @@ config ADIN_PHY
> >
> > - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
> >
> > Ethernet PHY
> >
> > +config AC200_PHY
> > + tristate "AC200 EPHY"
> > + depends on NVMEM
> > + depends on OF
> > + help
> > + Fast ethernet PHY as found in X-Powers AC200 multi-function
device.
> > +
> >
> > config AMD_PHY
> >
> > tristate "AMD PHYs"
> > ---help---
> >
> > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> > index 2f5c7093a65b..b0c5b91900fa 100644
> > --- a/drivers/net/phy/Makefile
> > +++ b/drivers/net/phy/Makefile
> > @@ -53,6 +53,7 @@ obj-$(CONFIG_SFP) += sfp.o
> >
> > sfp-obj-$(CONFIG_SFP) += sfp-bus.o
> > obj-y += $(sfp-obj-y) $(sfp-obj-m)
> >
> > +obj-$(CONFIG_AC200_PHY) += ac200.o
> >
> > obj-$(CONFIG_ADIN_PHY) += adin.o
> > obj-$(CONFIG_AMD_PHY) += amd.o
> > aquantia-objs += aquantia_main.o
> >
> > diff --git a/drivers/net/phy/ac200.c b/drivers/net/phy/ac200.c
> > new file mode 100644
> > index 000000000000..3d7856ff8f91
> > --- /dev/null
> > +++ b/drivers/net/phy/ac200.c
> > @@ -0,0 +1,206 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/**
> > + * Driver for AC200 Ethernet PHY
> > + *
> > + * Copyright (c) 2020 Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mfd/ac200.h>
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/of.h>
> > +#include <linux/phy.h>
> > +#include <linux/platform_device.h>
> > +
> > +#define AC200_EPHY_ID 0x00441400
> > +#define AC200_EPHY_ID_MASK 0x0ffffff0
> > +
> > +/* macros for system ephy control 0 register */
> > +#define AC200_EPHY_RESET_INVALID BIT(0)
> > +#define AC200_EPHY_SYSCLK_GATING BIT(1)
> > +
> > +/* macros for system ephy control 1 register */
> > +#define AC200_EPHY_E_EPHY_MII_IO_EN BIT(0)
> > +#define AC200_EPHY_E_LNK_LED_IO_EN BIT(1)
> > +#define AC200_EPHY_E_SPD_LED_IO_EN BIT(2)
> > +#define AC200_EPHY_E_DPX_LED_IO_EN BIT(3)
> > +
> > +/* macros for ephy control register */
> > +#define AC200_EPHY_SHUTDOWN BIT(0)
> > +#define AC200_EPHY_LED_POL BIT(1)
> > +#define AC200_EPHY_CLK_SEL BIT(2)
> > +#define AC200_EPHY_ADDR(x) (((x) & 0x1F) << 4)
> > +#define AC200_EPHY_XMII_SEL BIT(11)
> > +#define AC200_EPHY_CALIB(x) (((x) & 0xF) << 12)
> > +
> > +struct ac200_ephy_dev {
> > + struct phy_driver *ephy;
> > + struct regmap *regmap;
> > +};
> > +
> > +static char *ac200_phy_name = "AC200 EPHY";
> > +
> > +static int ac200_ephy_config_init(struct phy_device *phydev)
> > +{
> > + const struct ac200_ephy_dev *priv = phydev->drv->driver_data;
> > + unsigned int value;
> > + int ret;
> > +
> > + phy_write(phydev, 0x1f, 0x0100); /* Switch to Page 1 */
>
> You could define a macro for accessing the page and you may consider
> implementing .read_page and .write_page and use the
> phy_read_paged()/phy_write_paged() helper functions.
Yeah, I saw that, but they bring some overhead - there is no need to switch
page back after write, because next write changes it anyway. But it will
probably be more readable and it's done only once so overhead is acceptable.
>
> > + phy_write(phydev, 0x12, 0x4824); /* Disable APS */
> > +
> > + phy_write(phydev, 0x1f, 0x0200); /* Switch to Page 2 */
> > + phy_write(phydev, 0x18, 0x0000); /* PHYAFE TRX optimization */
> > +
> > + phy_write(phydev, 0x1f, 0x0600); /* Switch to Page 6 */
> > + phy_write(phydev, 0x14, 0x708f); /* PHYAFE TX optimization */
> > + phy_write(phydev, 0x13, 0xF000); /* PHYAFE RX optimization */
> > + phy_write(phydev, 0x15, 0x1530);
> > +
> > + phy_write(phydev, 0x1f, 0x0800); /* Switch to Page 6 */
>
> Seems like the comment does not match the code, that should be Page 8, no?
Right, I copy that from BSP driver. If they made this copy and paste error, I
wonder if all other comments are ok. I have no documentation about there
registers.
>
> > + phy_write(phydev, 0x18, 0x00bc); /* PHYAFE TRX optimization */
> > +
> > + phy_write(phydev, 0x1f, 0x0100); /* switch to page 1 */
> > + phy_clear_bits(phydev, 0x17, BIT(3)); /* disable intelligent
IEEE */
>
> Intelligent EEE maybe?
Not sure. As I said before, I just copied comments from BSP driver:
https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/drivers/net/
phy/sunxi-ephy.c
This is my first take at ethernet phy drivers, so I don't really know if all
comments above make sense.
Best regards,
Jernej
