Applied "ASoC: qdsp6: Suggest more generic node names" to the asoc tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch

   ASoC: qdsp6: Suggest more generic node names

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 35c638d039bbabbca7affb52960d468951d811c1 Mon Sep 17 00:00:00 2001
From: Stephan Gerhold <stephan@xxxxxxxxxxx>
Date: Wed, 15 Apr 2020 10:11:58 +0200
Subject: [PATCH] ASoC: qdsp6: Suggest more generic node names

Change the listed examples to use more generic node names, representing
the class of the device nodes:

  - apr-service@<id>
  - dai@<id>

Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi.

Also add #address-cells + #size-cells to the q6asm example,
without them the example produces dtc warnings.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20200415081159.1098-1-stephan@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 .../devicetree/bindings/sound/qcom,q6adm.txt  |  2 +-
 .../devicetree/bindings/sound/qcom,q6afe.txt  | 46 +++++++++----------
 .../devicetree/bindings/sound/qcom,q6asm.txt  |  7 ++-
 .../devicetree/bindings/sound/qcom,q6core.txt |  2 +-
 4 files changed, 30 insertions(+), 27 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
index bbae426cdfb1..15c353a20de8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -29,7 +29,7 @@ used by the apr service device.
 	Definition: Must be 0
 
 = EXAMPLE
-q6adm@8 {
+apr-service@8 {
 	compatible = "qcom,q6adm";
 	reg = <APR_SVC_ADM>;
 	q6routing: routing {
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index d74888b9f1bb..4916dd6a0896 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
 
 = EXAMPLE
 
-q6afe@4 {
+apr-service@4 {
 	compatible = "qcom,q6afe";
 	reg = <APR_SVC_AFE>;
 
@@ -110,12 +110,12 @@ q6afe@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		hdmi@1 {
-			reg = <1>;
+		dai@1 {
+			reg = <HDMI_RX>;
 		};
 
-		tdm@24 {
-			reg = <24>;
+		dai@24 {
+			reg = <PRIMARY_TDM_RX_0>;
 			qcom,tdm-sync-mode = <1>:
 			qcom,tdm-sync-src = <1>;
 			qcom,tdm-data-out = <0>;
@@ -125,8 +125,8 @@ q6afe@4 {
 
 		};
 
-		tdm@25 {
-			reg = <25>;
+		dai@25 {
+			reg = <PRIMARY_TDM_TX_0>;
 			qcom,tdm-sync-mode = <1>:
 			qcom,tdm-sync-src = <1>;
 			qcom,tdm-data-out = <0>;
@@ -135,43 +135,43 @@ q6afe@4 {
 			qcom,tdm-data-align = <0>;
 		};
 
-		prim-mi2s-rx@16 {
-			reg = <16>;
+		dai@16 {
+			reg = <PRIMARY_MI2S_RX>;
 			qcom,sd-lines = <0 2>;
 		};
 
-		prim-mi2s-tx@17 {
-			reg = <17>;
+		dai@17 {
+			reg = <PRIMARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 
-		sec-mi2s-rx@18 {
-			reg = <18>;
+		dai@18 {
+			reg = <SECONDARY_MI2S_RX>;
 			qcom,sd-lines = <0 3>;
 		};
 
-		sec-mi2s-tx@19 {
-			reg = <19>;
+		dai@19 {
+			reg = <SECONDARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 
-		tert-mi2s-rx@20 {
-			reg = <20>;
+		dai@20 {
+			reg = <TERTIARY_MI2S_RX>;
 			qcom,sd-lines = <1 3>;
 		};
 
-		tert-mi2s-tx@21 {
-			reg = <21>;
+		dai@21 {
+			reg = <TERTIARY_MI2S_TX>;
 			qcom,sd-lines = <0>;
 		};
 
-		quat-mi2s-rx@22 {
-			reg = <22>;
+		dai@22 {
+			reg = <QUATERNARY_MI2S_RX>;
 			qcom,sd-lines = <0>;
 		};
 
-		quat-mi2s-tx@23 {
-			reg = <23>;
+		dai@23 {
+			reg = <QUATERNARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
index 9f5378c51686..6b9a88d0ea3f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
@@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
 
 = EXAMPLE
 
-q6asm@7 {
+apr-service@7 {
 	compatible = "qcom,q6asm";
 	reg = <APR_SVC_ASM>;
 	q6asmdai: dais {
 		compatible = "qcom,q6asm-dais";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		#sound-dai-cells = <1>;
-		mm@0 {
+
+		dai@0 {
 			reg = <0>;
 			direction = <2>;
 			is-compress-dai;
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
index 7f36ff8bec18..5cd4cc9b1fde 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
@@ -15,7 +15,7 @@ used by the apr service device.
 		   example "qcom,q6core-v2.0"
 
 = EXAMPLE
-q6core@3 {
+apr-service@3 {
 	compatible = "qcom,q6core";
 	reg = <APR_SVC_ADSP_CORE>;
 };
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux