EASRC (Enhanced Asynchronous Sample Rate Converter) is a new IP module found on i.MX8MN. Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../devicetree/bindings/sound/fsl,easrc.yaml | 101 ++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml new file mode 100644 index 000000000000..73cdcf053a9c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Asynchronous Sample Rate Converter (ASRC) Controller + +maintainers: + - Shengjiu Wang <shengjiu.wang@xxxxxxx> + +properties: + $nodename: + pattern: "^easrc@.*" + + compatible: + const: fsl,imx8mn-easrc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral clock + + clock-names: + items: + - const: mem + + dmas: + maxItems: 8 + + dma-names: + items: + - const: ctx0_rx + - const: ctx0_tx + - const: ctx1_rx + - const: ctx1_tx + - const: ctx2_rx + - const: ctx2_tx + - const: ctx3_rx + - const: ctx3_tx + + firmware-name: + allOf: + - $ref: /schemas/types.yaml#/definitions/string + - const: imx/easrc/easrc-imx8mn.bin + description: The coefficient table for the filters + + fsl,asrc-rate: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 8000 + - maximum: 192000 + description: Defines a mutual sample rate used by DPCM Back Ends + + fsl,asrc-format: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [2, 6, 10, 32, 36] + default: 2 + description: + Defines a mutual sample format used by DPCM Back Ends + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - firmware-name + - fsl,asrc-rate + - fsl,asrc-format + +examples: + - | + #include <dt-bindings/clock/imx8mn-clock.h> + + easrc: easrc@300c0000 { + compatible = "fsl,imx8mn-easrc"; + reg = <0x0 0x300c0000 0x0 0x10000>; + interrupts = <0x0 122 0x4>; + clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; + clock-names = "mem"; + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, + <&sdma2 18 23 0> , <&sdma2 19 23 0>, + <&sdma2 20 23 0> , <&sdma2 21 23 0>, + <&sdma2 22 23 0> , <&sdma2 23 23 0>; + dma-names = "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx"; + firmware-name = "imx/easrc/easrc-imx8mn.bin"; + fsl,asrc-rate = <8000>; + fsl,asrc-format = <2>; + }; -- 2.21.0
