changes v5: - PRTI6Q: remove status from the pwm-backlight node - drop the vendor-prefixes patch, it is already taken by Rob - add Reviewed-by: Rob Herring <robh@xxxxxxxxxx> changes v4: - VT7: fix typo changes v3: - move compatible to the start of node - move status to the end - use generic names in compatible - refactor dts/dtsi - use alphabet order for pinctrl and phandels - remove unused or currently not supported nodes changes v2: - squash PRTI6Q patches Oleksij Rempel (4): ARM: dts: add Protonic PRTI6Q board ARM: dts: add Protonic WD2 board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic RVT board .../devicetree/bindings/arm/fsl.yaml | 4 + arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/imx6dl-prtrvt.dts | 203 +++++++ arch/arm/boot/dts/imx6dl-prtvt7.dts | 473 +++++++++++++++ arch/arm/boot/dts/imx6q-prti6q.dts | 550 ++++++++++++++++++ arch/arm/boot/dts/imx6q-prtwd2.dts | 188 ++++++ arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 185 ++++++ 7 files changed, 1607 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi -- 2.26.0.rc2
