Applied "regulator: max77826: Add max77826 regulator driver" to the regulator tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch

   regulator: max77826: Add max77826 regulator driver

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From e7314653dc08efbf3c6a17fff7290cf2d89ea03b Mon Sep 17 00:00:00 2001
From: Iskren Chernev <iskren.chernev@xxxxxxxxx>
Date: Tue, 14 Apr 2020 20:22:48 +0300
Subject: [PATCH] regulator: max77826: Add max77826 regulator driver

Adding regulator driver for the Maxim max77826 device.
The max77826 PMIC contains a high-efficiency BUCK regulator, a BUCK
BOOST regulator and 15 LDOs. It is designed for smartphone and tablet
applications and is accessed over I2C.

Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
Link: https://lore.kernel.org/r/20200414172250.2363235-2-iskren.chernev@xxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/regulator/Kconfig              |  10 +
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/max77826-regulator.c | 301 +++++++++++++++++++++++++
 3 files changed, 312 insertions(+)
 create mode 100644 drivers/regulator/max77826-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f4b72cb098ef..e8f7a0965ae9 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -585,6 +585,16 @@ config REGULATOR_MAX77802
 	  Exynos5420/Exynos5800 SoCs to control various voltages.
 	  It includes support for control of voltage and ramp speed.
 
+config REGULATOR_MAX77826
+	tristate "Maxim 77826 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 77826 regulator via I2C bus.
+	  The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
+	  It includes support for control of output voltage. This
+	  regulator is found on the Samsung Galaxy S5 (klte) smartphone.
+
 config REGULATOR_MC13XXX_CORE
 	tristate
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 6610ee001d9a..e8f163371071 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
 obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
+obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
diff --git a/drivers/regulator/max77826-regulator.c b/drivers/regulator/max77826-regulator.c
new file mode 100644
index 000000000000..502ab6afc814
--- /dev/null
+++ b/drivers/regulator/max77826-regulator.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// max77826-regulator.c  - regulator driver for Maxim MAX77826
+//
+// Author: Iskren Chernev <iskren.chernev@xxxxxxxxx>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+enum max77826_registers {
+	MAX77826_REG_INT_SRC = 0x00,
+	MAX77826_REG_SYS_INT,
+	MAX77826_REG_INT1,
+	MAX77826_REG_INT2,
+	MAX77826_REG_BB_INT,
+	MAX77826_REG_INT_SRC_M,
+	MAX77826_REG_TOPSYS_INT_M,
+	MAX77826_REG_INT1_M,
+	MAX77826_REG_INT2_M,
+	MAX77826_REG_BB_INT_M,
+	MAX77826_REG_TOPSYS_STAT,
+	MAX77826_REG_STAT1,
+	MAX77826_REG_STAT2,
+	MAX77826_REG_BB_STAT,
+	/* 0x0E - 0x0F: Reserved */
+	MAX77826_REG_LDO_OPMD1 = 0x10,
+	MAX77826_REG_LDO_OPMD2,
+	MAX77826_REG_LDO_OPMD3,
+	MAX77826_REG_LDO_OPMD4,
+	MAX77826_REG_B_BB_OPMD,
+	/* 0x15 - 0x1F: Reserved */
+	MAX77826_REG_LDO1_CFG = 0x20,
+	MAX77826_REG_LDO2_CFG,
+	MAX77826_REG_LDO3_CFG,
+	MAX77826_REG_LDO4_CFG,
+	MAX77826_REG_LDO5_CFG,
+	MAX77826_REG_LDO6_CFG,
+	MAX77826_REG_LDO7_CFG,
+	MAX77826_REG_LDO8_CFG,
+	MAX77826_REG_LDO9_CFG,
+	MAX77826_REG_LDO10_CFG,
+	MAX77826_REG_LDO11_CFG,
+	MAX77826_REG_LDO12_CFG,
+	MAX77826_REG_LDO13_CFG,
+	MAX77826_REG_LDO14_CFG,
+	MAX77826_REG_LDO15_CFG,
+	/* 0x2F: Reserved */
+	MAX77826_REG_BUCK_CFG = 0x30,
+	MAX77826_REG_BUCK_VOUT,
+	MAX77826_REG_BB_CFG,
+	MAX77826_REG_BB_VOUT,
+	/* 0x34 - 0x3F: Reserved */
+	MAX77826_REG_BUCK_SS_FREQ = 0x40,
+	MAX77826_REG_UVLO_FALL,
+	/* 0x42 - 0xCE: Reserved */
+	MAX77826_REG_DEVICE_ID = 0xCF,
+};
+
+enum max77826_regulators {
+	MAX77826_LDO1 = 0,
+	MAX77826_LDO2,
+	MAX77826_LDO3,
+	MAX77826_LDO4,
+	MAX77826_LDO5,
+	MAX77826_LDO6,
+	MAX77826_LDO7,
+	MAX77826_LDO8,
+	MAX77826_LDO9,
+	MAX77826_LDO10,
+	MAX77826_LDO11,
+	MAX77826_LDO12,
+	MAX77826_LDO13,
+	MAX77826_LDO14,
+	MAX77826_LDO15,
+	MAX77826_BUCK,
+	MAX77826_BUCKBOOST,
+	MAX77826_MAX_REGULATORS,
+};
+
+#define MAX77826_MASK_LDO		0x7f
+#define MAX77826_MASK_BUCK		0xff
+#define MAX77826_MASK_BUCKBOOST		0x7f
+#define MAX77826_BUCK_RAMP_DELAY	12500
+
+/* values in mV */
+/* for LDO1-3 */
+#define MAX77826_NMOS_LDO_VOLT_MIN	600000
+#define MAX77826_NMOS_LDO_VOLT_MAX	2187500
+#define MAX77826_NMOS_LDO_VOLT_STEP	12500
+
+/* for LDO4-15 */
+#define MAX77826_PMOS_LDO_VOLT_MIN	800000
+#define MAX77826_PMOS_LDO_VOLT_MAX	3975000
+#define MAX77826_PMOS_LDO_VOLT_STEP	25000
+
+/* for BUCK */
+#define MAX77826_BUCK_VOLT_MIN		500000
+#define MAX77826_BUCK_VOLT_MAX		1800000
+#define MAX77826_BUCK_VOLT_STEP		6250
+
+/* for BUCKBOOST */
+#define MAX77826_BUCKBOOST_VOLT_MIN	2600000
+#define MAX77826_BUCKBOOST_VOLT_MAX	4187500
+#define MAX77826_BUCKBOOST_VOLT_STEP	12500
+#define MAX77826_VOLT_RANGE(_type)					\
+	((MAX77826_ ## _type ## _VOLT_MAX -				\
+	  MAX77826_ ## _type ## _VOLT_MIN) /				\
+	 MAX77826_ ## _type ## _VOLT_STEP + 1)
+
+#define MAX77826_LDO(_id, _type)					\
+	[MAX77826_LDO ## _id] = {					\
+		.id = MAX77826_LDO ## _id,				\
+		.name = "LDO"#_id,					\
+		.of_match = of_match_ptr("LDO"#_id),			\
+		.regulators_node = "regulators",			\
+		.ops = &max77826_most_ops,				\
+		.min_uV = MAX77826_ ## _type ## _LDO_VOLT_MIN,		\
+		.uV_step = MAX77826_ ## _type ## _LDO_VOLT_STEP,	\
+		.n_voltages = MAX77826_VOLT_RANGE(_type ## _LDO),	\
+		.enable_reg = MAX77826_REG_LDO_OPMD1 + (_id - 1) / 4,	\
+		.enable_mask = BIT(((_id - 1) % 4) * 2 + 1),		\
+		.vsel_reg = MAX77826_REG_LDO1_CFG + (_id - 1),		\
+		.vsel_mask = MAX77826_MASK_LDO,				\
+		.owner = THIS_MODULE,					\
+	}
+
+#define MAX77826_BUCK(_idx, _id, _ops)					\
+	[MAX77826_ ## _id] = {						\
+		.id = MAX77826_ ## _id,					\
+		.name = #_id,						\
+		.of_match = of_match_ptr(#_id),				\
+		.regulators_node = "regulators",			\
+		.ops = &_ops,						\
+		.min_uV =  MAX77826_ ## _id ## _VOLT_MIN,		\
+		.uV_step = MAX77826_ ## _id ## _VOLT_STEP,		\
+		.n_voltages = MAX77826_VOLT_RANGE(_id),			\
+		.enable_reg = MAX77826_REG_B_BB_OPMD,			\
+		.enable_mask = BIT(_idx * 2 + 1),			\
+		.vsel_reg = MAX77826_REG_BUCK_VOUT + _idx * 2,		\
+		.vsel_mask = MAX77826_MASK_ ## _id,			\
+		.owner = THIS_MODULE,					\
+	}
+
+
+
+struct max77826_regulator_info {
+	struct regmap *regmap;
+	struct regulator_desc *rdesc;
+};
+
+static const struct regmap_config max77826_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77826_REG_DEVICE_ID,
+};
+
+static int max77826_set_voltage_time_sel(struct regulator_dev *,
+				unsigned int old_selector,
+				unsigned int new_selector);
+
+static const struct regulator_ops max77826_most_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops max77826_buck_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= max77826_set_voltage_time_sel,
+};
+
+static struct regulator_desc max77826_regulators_desc[] = {
+	MAX77826_LDO(1, NMOS),
+	MAX77826_LDO(2, NMOS),
+	MAX77826_LDO(3, NMOS),
+	MAX77826_LDO(4, PMOS),
+	MAX77826_LDO(5, PMOS),
+	MAX77826_LDO(6, PMOS),
+	MAX77826_LDO(7, PMOS),
+	MAX77826_LDO(8, PMOS),
+	MAX77826_LDO(9, PMOS),
+	MAX77826_LDO(10, PMOS),
+	MAX77826_LDO(11, PMOS),
+	MAX77826_LDO(12, PMOS),
+	MAX77826_LDO(13, PMOS),
+	MAX77826_LDO(14, PMOS),
+	MAX77826_LDO(15, PMOS),
+	MAX77826_BUCK(0, BUCK, max77826_buck_ops),
+	MAX77826_BUCK(1, BUCKBOOST, max77826_most_ops),
+};
+
+static int max77826_set_voltage_time_sel(struct regulator_dev *rdev,
+				unsigned int old_selector,
+				unsigned int new_selector)
+{
+	if (new_selector > old_selector) {
+		return DIV_ROUND_UP(MAX77826_BUCK_VOLT_STEP *
+				(new_selector - old_selector),
+				MAX77826_BUCK_RAMP_DELAY);
+	}
+
+	return 0;
+}
+
+static int max77826_read_device_id(struct regmap *regmap, struct device *dev)
+{
+	unsigned int device_id;
+	int res;
+
+	res = regmap_read(regmap, MAX77826_REG_DEVICE_ID, &device_id);
+	if (!res)
+		dev_dbg(dev, "DEVICE_ID: 0x%x\n", device_id);
+
+	return res;
+}
+
+static int max77826_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max77826_regulator_info *info;
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	int i;
+
+	info = devm_kzalloc(dev, sizeof(struct max77826_regulator_info),
+				GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->rdesc = max77826_regulators_desc;
+	regmap = devm_regmap_init_i2c(client, &max77826_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+
+	info->regmap = regmap;
+	i2c_set_clientdata(client, info);
+
+	config.dev = dev;
+	config.regmap = regmap;
+	config.driver_data = info;
+
+	for (i = 0; i < MAX77826_MAX_REGULATORS; i++) {
+		rdev = devm_regulator_register(dev,
+					       &max77826_regulators_desc[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "Failed to register regulator!\n");
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return max77826_read_device_id(regmap, dev);
+}
+
+static const struct of_device_id max77826_of_match[] = {
+	{ .compatible = "maxim,max77826" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max77826_of_match);
+
+static const struct i2c_device_id max77826_id[] = {
+	{ "max77826-regulator" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, max77826_id);
+
+static struct i2c_driver max77826_regulator_driver = {
+	.driver = {
+		.name = "max77826",
+		.of_match_table = of_match_ptr(max77826_of_match),
+	},
+	.probe_new = max77826_i2c_probe,
+	.id_table = max77826_id,
+};
+module_i2c_driver(max77826_regulator_driver);
+
+MODULE_AUTHOR("Iskren Chernev <iskren.chernev@xxxxxxxxx>");
+MODULE_DESCRIPTION("MAX77826 PMIC regulator driver");
+MODULE_LICENSE("GPL");
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux