This patch adds the dts binding schema for the cw2015 fuel gauge. Signed-off-by: Tobias Schramm <t.schramm@xxxxxxxxxxx> --- .../bindings/power/supply/cw2015_battery.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml new file mode 100644 index 000000000000..4a265d4234b9 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery driver for CW2015 shuntless fuel gauge by CellWise. + +maintainers: + - Tobias Schramm <t.schramm@xxxxxxxxxxx> + +description: | + The driver can utilize information from a simple-battery linked via a + phandle in monitored-battery. If specified the driver uses the + charge-full-design-microamp-hours property of the battery. + +properties: + compatible: + const: cellwise,cw2015 + + reg: + maxItems: 1 + + cellwise,battery-profile: + description: | + This property specifies characteristics of the battery used. The format + of this binary blob is kept secret by CellWise. The only way to obtain + it is to mail two batteries to a test facility of CellWise and receive + back a test report with the binary blob. + allOf: + - $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 64 + maxItems: 64 + + cellwise,monitor-interval-ms: + description: + Specifies the interval in milliseconds gauge values are polled at + minimum: 250 + + power-supplies: + description: + Specifies supplies used for charging the battery connected to this gauge + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - minItems: 1 + maxItems: 8 # Should be enough + + monitored-battery: + description: + Specifies the phandle of a simple-battery connected to this gauge + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cw2015@62 { + compatible = "cellwise,cw201x"; + reg = <0x62>; + cellwise,battery-profile = /bits/ 8 < + 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 + 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 + 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 + 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 + 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 + 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D + 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 + >; + cellwise,monitor-interval-ms = <5000>; + monitored-battery = <&bat>; + power-supplies = <&mains_charger>, <&usb_charger>; + }; + }; + -- 2.26.0
