If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N*X) cells.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
arch/mips/boot/dts/ingenic/jz4740.dtsi | 19 +++++++++----------
arch/mips/boot/dts/ingenic/jz4770.dtsi | 12 +++++-------
arch/mips/boot/dts/ingenic/jz4780.dtsi | 24 +++++++++++-------------
arch/mips/boot/dts/ingenic/x1000.dtsi | 9 ++++-----
4 files changed, 29 insertions(+), 35 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index a3301bab9231..b56671157bbd 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -55,10 +55,10 @@ tcu: timer@10002000 {
#clock-cells = <1>;
- clocks = <&cgu JZ4740_CLK_RTC
- &cgu JZ4740_CLK_EXT
- &cgu JZ4740_CLK_PCLK
- &cgu JZ4740_CLK_TCU>;
+ clocks = <&cgu JZ4740_CLK_RTC>,
+ <&cgu JZ4740_CLK_EXT>,
+ <&cgu JZ4740_CLK_PCLK>,
+ <&cgu JZ4740_CLK_TCU>;
clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
@@ -241,10 +241,10 @@ nemc: memory-controller@13010000 {
reg = <0x13010000 0x54>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 0x18000000 0x4000000
- 2 0 0x14000000 0x4000000
- 3 0 0x0c000000 0x4000000
- 4 0 0x08000000 0x4000000>;
+ ranges = <1 0 0x18000000 0x4000000>,
+ <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>,
+ <4 0 0x08000000 0x4000000>;
clocks = <&cgu JZ4740_CLK_MCLK>;
};
@@ -258,8 +258,7 @@ ecc: ecc-controller@13010100 {
dmac: dma-controller@13020000 {
compatible = "ingenic,jz4740-dma";
- reg = <0x13020000 0xbc
- 0x13020300 0x14>;
+ reg = <0x13020000 0xbc>, <0x13020300 0x14>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 3805816cea2e..9a25a6f7a48d 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -55,9 +55,9 @@ tcu: timer@10002000 {
#clock-cells = <1>;
- clocks = <&cgu JZ4770_CLK_RTC
- &cgu JZ4770_CLK_EXT
- &cgu JZ4770_CLK_PCLK>;
+ clocks = <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_EXT>,
+ <&cgu JZ4770_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -219,8 +219,7 @@ uart3: serial@10033000 {
dmac0: dma-controller@13420000 {
compatible = "ingenic,jz4770-dma";
- reg = <0x13420000 0xC0
- 0x13420300 0x20>;
+ reg = <0x13420000 0xC0>, <0x13420300 0x20>;
#dma-cells = <2>;
@@ -234,8 +233,7 @@ dmac0: dma-controller@13420000 {
dmac1: dma-controller@13420100 {
compatible = "ingenic,jz4770-dma";
- reg = <0x13420100 0xC0
- 0x13420400 0x20>;
+ reg = <0x13420100 0xC0>, <0x13420400 0x20>;
#dma-cells = <2>;
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index bb89653d16a3..51ea764101aa 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -58,9 +58,9 @@ tcu: timer@10002000 {
#clock-cells = <1>;
- clocks = <&cgu JZ4780_CLK_RTCLK
- &cgu JZ4780_CLK_EXCLK
- &cgu JZ4780_CLK_PCLK>;
+ clocks = <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_EXCLK>,
+ <&cgu JZ4780_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -196,8 +196,7 @@ spi_gpio {
gpio-miso = <&gpe 14 0>;
gpio-sck = <&gpe 15 0>;
gpio-mosi = <&gpe 17 0>;
- cs-gpios = <&gpe 16 0
- &gpe 18 0>;
+ cs-gpios = <&gpe 16 0>, <&gpe 18 0>;
spidev@0 {
compatible = "spidev";
@@ -362,12 +361,12 @@ nemc: nemc@13410000 {
reg = <0x13410000 0x10000>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 0x1b000000 0x1000000
- 2 0 0x1a000000 0x1000000
- 3 0 0x19000000 0x1000000
- 4 0 0x18000000 0x1000000
- 5 0 0x17000000 0x1000000
- 6 0 0x16000000 0x1000000>;
+ ranges = <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
clocks = <&cgu JZ4780_CLK_NEMC>;
@@ -376,8 +375,7 @@ nemc: nemc@13410000 {
dma: dma@13420000 {
compatible = "ingenic,jz4780-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 147f7d5c243a..59a63a0985a8 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -58,9 +58,9 @@ tcu: timer@10002000 {
#clock-cells = <1>;
- clocks = <&cgu X1000_CLK_RTCLK
- &cgu X1000_CLK_EXCLK
- &cgu X1000_CLK_PCLK>;
+ clocks = <&cgu X1000_CLK_RTCLK>,
+ <&cgu X1000_CLK_EXCLK>,
+ <&cgu X1000_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -239,8 +239,7 @@ uart2: serial@10032000 {
pdma: dma-controller@13420000 {
compatible = "ingenic,x1000-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
--
2.25.1
