atmel hlcdc is a MFD devide with two sub-devices:
- PWM
- Display controller
Add binding files for each device:
- mfd/atmel-hlcdc - this is overall device
- pwm/atmel-hlcdc-pwm - the pwm part, used for backlight
- display/atmel/hlcdc-dc - the display controller
The hlcdc IP is present in several different chips from microchip
(former Atmel). The individual chips has independent compatibles in
the mfd binding, to allow for chip specific configuration.
As the conversion is a full re-write there was no tie to the original
license, and the standard license for bindings is used.
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Boris Brezillon <bbrezillon@xxxxxxxxxx>
---
.../bindings/display/atmel/hlcdc-dc.txt | 75 -------------
.../bindings/display/atmel/hlcdc-dc.yaml | 102 ++++++++++++++++++
.../devicetree/bindings/mfd/atmel-hlcdc.txt | 55 ----------
.../devicetree/bindings/mfd/atmel-hlcdc.yaml | 78 ++++++++++++++
.../bindings/pwm/atmel-hlcdc-pwm.txt | 29 -----
.../bindings/pwm/atmel-hlcdc-pwm.yaml | 39 +++++++
6 files changed, 219 insertions(+), 159 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
create mode 100644 Documentation/devicetree/bindings/display/atmel/hlcdc-dc.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.yaml
delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
create mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.yaml
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
deleted file mode 100644
index 0398aec488ac..000000000000
--- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
-
-The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
-See ../../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be "atmel,hlcdc-display-controller"
- - pinctrl-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the default pinctrl states.
- - #address-cells: should be set to 1.
- - #size-cells: should be set to 0.
-
-Required children nodes:
- Children nodes are encoding available output ports and their connections
- to external devices using the OF graph reprensentation (see ../graph.txt).
- At least one port node is required.
-
-Optional properties in grandchild nodes:
- Any endpoint grandchild node may specify a desired video interface
- according to ../../media/video-interfaces.txt, specifically
- - bus-width: recognized values are <12>, <16>, <18> and <24>, and
- override any output mode selection heuristic, forcing "rgb444",
- "rgb565", "rgb666" and "rgb888" respectively.
-
-Example:
-
- hlcdc: hlcdc@f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
- reg = <0xf0030000 0x2000>;
- interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
- clock-names = "periph_clk","sys_clk", "slow_clk";
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- hlcdc_panel_output: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
- };
-
-Example 2: With a video interface override to force rgb565; as above
-but with these changes/additions:
-
- &hlcdc {
- hlcdc-display-controller {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
- port@0 {
- hlcdc_panel_output: endpoint@0 {
- bus-width = <16>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.yaml b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.yaml
new file mode 100644
index 000000000000..7eb6266a25a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel/hlcdc-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel HLCDC (High LCD Controller) display controller
+
+maintainers:
+ - Sam Ravnborg <sam@xxxxxxxxxxxx>
+ - Boris Brezillon <bbrezillon@xxxxxxxxxx>
+
+description: |
+ The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
+ See ../../mfd/atmel-hlcdc.yaml for more details.
+
+properties:
+ compatible:
+ const: atmel,hlcdc-display-controller
+
+ "#address-cells":
+ const: 1
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+patternProperties:
+ "^port@[0-9]$":
+ type: object
+ description: |
+ A port node with endpoint definitions as defined in
+ ../../media/video-interfaces.txt
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+ description: The virtual number of the port
+
+ patternProperties:
+ "^endpoint(@[0-9])$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+ description: The virtual number of the endpoint
+
+ bus-width:
+ enum: [12, 16, 18, 24]
+ description:
+ Any endpoint node may specify a desired video interface
+ according to ../../media/video-interfaces.txt, specifically
+ Recognized values are <12>, <16>, <18> and <24>, and
+ override any output mode selection heuristic, forcing
+ "rgb444", "rgb565", "rgb666" and "rgb888" respectively.
+
+ remote-endpoint:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the panel node
+
+ required:
+ - reg
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ endpoint@0 {
+ reg = <0>;
+ bus-width = <16>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
deleted file mode 100644
index 5f8880cc757e..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
- "atmel,at91sam9n12-hlcdc"
- "atmel,at91sam9x5-hlcdc"
- "atmel,sama5d2-hlcdc"
- "atmel,sama5d3-hlcdc"
- "atmel,sama5d4-hlcdc"
- "microchip,sam9x60-hlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
- Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
- hlcdc: hlcdc@f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
- reg = <0xf0030000 0x2000>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
- clock-names = "periph_clk","sys_clk", "slow_clk";
- interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- hlcdc_panel_output: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
- };
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.yaml b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.yaml
new file mode 100644
index 000000000000..cad14fa173a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel-hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for Atmel's HLCDC (High LCD Controller)
+
+maintainers:
+ - Sam Ravnborg <sam@xxxxxxxxxxxx>
+ - Boris Brezillon <bbrezillon@xxxxxxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91sam9n12-hlcdc
+ - atmel,at91sam9x5-hlcdc
+ - atmel,sama5d2-hlcdc
+ - atmel,sama5d3-hlcdc
+ - atmel,sama5d4-hlcdc
+ - microchip,sam9x60-hlcdc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ maxItems: 3
+ items:
+ - const: periph_clk
+ - const: sys_clk
+ - const: slow_clk
+
+ interrupts:
+ description: The HLCDC interrupt line
+ maxItems: 1
+
+ hlcdc_pwm:
+ type: object
+ description: |
+ PWM controller - used for backlight.
+ See ../pwm/atmel-hlcdc-pwm.yaml for details
+
+ hlcdc-display-controller:
+ type: object
+ description: |
+ LCD display controller
+ See ../display/atmel/hlcdc-dc.yaml for details
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ hlcdc {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ hlcdc-display-controller {
+ };
+
+ hlcdc_pwm {
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
deleted file mode 100644
index afa501bf7f94..000000000000
--- a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
-
-The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
-See ../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be one of the following:
- "atmel,hlcdc-pwm"
- - pinctr-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the pinctrl states described by pinctrl
- default.
- - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells
- bindings defined in pwm.yaml in this directory.
-
-Example:
-
- hlcdc: hlcdc@f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
- reg = <0xf0030000 0x2000>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
- clock-names = "periph_clk","sys_clk", "slow_clk";
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
- };
diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.yaml
new file mode 100644
index 000000000000..70d063b48260
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/atmel-hlcdc-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM
+
+maintainers:
+ - Sam Ravnborg <sam@xxxxxxxxxxxx>
+ - Boris Brezillon <bbrezillon@xxxxxxxxxx>
+
+description: |
+ The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
+ See ../mfd/atmel-hlcdc.txt for more details.
+
+properties:
+ compatible:
+ const: atmel,hlcdc-pwm
+
+ "#pwm-cells":
+ const: 3
+ description:
+ This PWM chip use the default 3 cells bindings defined in pwm.yaml.
+
+required:
+ - compatible
+ - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ hlcdc_pwm {
+ compatible = "atmel,hlcdc-pwm";
+ #pwm-cells = <3>;
+ };
+
+...
--
2.20.1
