Re: [PATCH v4 2/5] dt-bindings: iio: Introduce common properties for iio sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun,  5 Apr 2020 15:50:29 +0200
Guido Günther <agx@xxxxxxxxxxx> wrote:

> Introduce a file for common properties of iio sensors. So far this
> contains the new proximity-near-level property for proximity sensors
> that indicates when an object should be considered near.
> 
> Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
This works for me. However, I would like to give time for Rob and
others to comment on the syntax, naming etc of this file.

Thanks,

Jonathan

> ---
>  .../devicetree/bindings/iio/common.yaml       | 35 +++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/common.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml
> new file mode 100644
> index 000000000000..97ffcb77043d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/common.yaml
> @@ -0,0 +1,35 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common properties for iio sensors
> +
> +maintainers:
> +  - Jonathan Cameron <jic23@xxxxxxxxxx>
> +  - Guido Günther <agx@xxxxxxxxxxx>
> +
> +description: |
> +  This document defines device tree properties common to several iio
> +  sensors. It doesn't constitue a device tree binding specification by itself but
> +  is meant to be referenced by device tree bindings.
> +
> +  When referenced from sensor tree bindings the properties defined in this
> +  document are defined as follows. The sensor tree bindings are responsible for
> +  defining whether each property is required or optional.
> +
> +properties:
> +  proximity-near-level:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      For proximity sensors whether an object can be considered near to the
> +      device depends on parameters like sensor position, covering glass and
> +      aperture. This value gives an indication to userspace for which
> +      sensor readings this is the case.
> +
> +      Raw proximity values equal or above this level should be
> +      considered 'near' to the device (an object is near to the
> +      sensor).
> +
> +...





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux