Re: [PATCH v3 2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/10/2020 7:18 PM, Stephen Boyd wrote:
> Quoting Wesley Cheng (2020-04-07 15:23:27)
>> diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
>> index e46824d..3158c14 100644
>> --- a/drivers/phy/qualcomm/Kconfig
>> +++ b/drivers/phy/qualcomm/Kconfig
>> @@ -85,6 +85,16 @@ config PHY_QCOM_USB_HS
>>           Support for the USB high-speed ULPI compliant phy on Qualcomm
>>           chipsets.
>>  
>> +config PHY_QCOM_USB_SNPS_HS_7NM
>> +       tristate "Qualcomm 7nm USB HS PHY module"
>> +       depends on OF && (ARCH_QCOM || COMPILE_TEST)
>> +       select GENERIC_PHY
>> +       help
>> +         Enable support for the USB high-speed SNPS phy on Qualcomm 7nm
>> +         chipsets.  This PHY has differences in the register map compared
>> +         to the 28nm variant.  The PHY is paired with a Synopsys DWC3 USB
>> +         controller on MSM SOCs.
> 
> s/MSM/Qualcomm/?
>

Hi Stephen,

Thanks for the catch.  Will replace with Qualcomm.

>> +
>>  config PHY_QCOM_USB_HSIC
>>         tristate "Qualcomm USB HSIC ULPI PHY module"
>>         depends on USB_ULPI_BUS
>> diff --git a/drivers/phy/qualcomm/phy-qcom-snps-7nm.c b/drivers/phy/qualcomm/phy-qcom-snps-7nm.c
>> new file mode 100644
>> index 0000000..00a46cd
>> --- /dev/null
>> +++ b/drivers/phy/qualcomm/phy-qcom-snps-7nm.c
>> @@ -0,0 +1,294 @@
> [...]
>> +
>> +/**
>> + * struct qcom_snps_hsphy - structure holding snps hs phy attributes
> 
> snps hs phy attributes
> 
> structure and holding are redundant.
> 

Understood.

>> + *
>> + * @phy: generic phy
>> + * @base: iomapped memory space for qubs2 phy
>> + *
>> + * @cfg_ahb_clk: AHB2PHY interface clock
>> + * @ref_clk: phy reference clock
>> + * @iface_clk: phy interface clock
>> + * @phy_reset: phy reset control
>> + * @vregs: regulator supplies bulk data
>> +
>> + * @phy_initialized: if PHY has been initialized correctly
> 
> Please drop space between members in the kernel-doc.
> 

Vinod actually pointed this out already, and I fixed this in v6.

>> + *
>> + */
>> +struct qcom_snps_hsphy {
>> +       struct phy *phy;
>> +       void __iomem *base;
>> +
>> +       struct clk *cfg_ahb_clk;
>> +       struct clk *ref_clk;
>> +       struct reset_control *phy_reset;
>> +       struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
>> +
>> +       bool phy_initialized;
>> +};
>> +
>> +static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
>> +                                   u32 mask, u32 val)
>> +{
>> +       u32 reg;
>> +
>> +       reg = readl(base + offset);
>> +       reg &= ~mask;
>> +       reg |= val & mask;
>> +       writel(reg, base + offset);
> 
> Make these relaxed?
> 
>> +
>> +       /* Ensure above write is completed */
>> +       readl(base + offset);
> 
> And this one too?
> 

Agreed, using the _relaxed() variant for these will be fine.  I'll
replace them in the next revision.

>> +}
>> +
>> +static int qcom_snps_hsphy_init(struct phy *phy)
>> +{
>> +       struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
>> +       int ret;
>> +
>> +       dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
>> +
>> +       /* turn on regulator supplies */
> 
> These comments don't tell us anything besides what the code is doing so
> they don't seem useful.
> 

Will remove the comments.

>> +       ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
>> +       if (ret)
>> +               return ret;
>> +
>> +       /* enable ahb interface clock to program phy */
>> +       ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
>> +       if (ret) {
>> +               dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
>> +               goto poweroff_phy;
>> +       }
>> +
>> +       /* Perform phy reset */
>> +       ret = reset_control_assert(hsphy->phy_reset);
>> +       if (ret) {
>> +               dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
>> +               goto disable_ahb_clk;
>> +       }
>> +
>> +       /* 100 us delay to keep PHY in reset mode */
>> +       usleep_range(100, 150);
>> +
>> +       ret = reset_control_deassert(hsphy->phy_reset);
>> +       if (ret) {
>> +               dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
>> +               goto disable_ahb_clk;
>> +       }
>> +
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
>> +                                                       UTMI_PHY_CMN_CTRL_OVERRIDE_EN,
>> +                                                       UTMI_PHY_CMN_CTRL_OVERRIDE_EN);
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
>> +                                                       POR, POR);
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0,
>> +                                                       FSEL_MASK, 0);
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
>> +                                       PLLBTUNE, PLLBTUNE);
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL,
>> +                                       REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK);
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
>> +                                       VBUSVLDEXTSEL0, VBUSVLDEXTSEL0);
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
>> +                                       VBUSVLDEXT0, VBUSVLDEXT0);
>> +
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
>> +                                       VREGBYPASS, VREGBYPASS);
>> +
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
>> +                                       USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
>> +                                       USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
>> +
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0,
>> +                                       SLEEPM, SLEEPM);
>> +
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
>> +                                       POR, 0);
>> +
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
>> +                                       USB2_SUSPEND_N_SEL, 0);
>> +
>> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
>> +                                       UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);
>> +
>> +       hsphy->phy_initialized = true;
>> +
>> +       return 0;
>> +
>> +disable_ahb_clk:
>> +       clk_disable_unprepare(hsphy->cfg_ahb_clk);
>> +poweroff_phy:
>> +       regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
>> +
>> +       return ret;
>> +}
>> +
>> +static int qcom_snps_hsphy_exit(struct phy *phy)
>> +{
>> +       struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
>> +
>> +       reset_control_assert(hsphy->phy_reset);
>> +       clk_disable_unprepare(hsphy->cfg_ahb_clk);
>> +       regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
>> +       hsphy->phy_initialized = false;
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct phy_ops qcom_snps_hsphy_gen_ops = {
>> +       .init           = qcom_snps_hsphy_init,
>> +       .exit           = qcom_snps_hsphy_exit,
>> +       .owner          = THIS_MODULE,
>> +};
>> +
>> +static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
>> +       {
>> +               .compatible     = "qcom,sm8150-usb-hs-phy",
>> +       },
>> +       {
>> +               .compatible     = "qcom,usb-snps-hs-7nm-phy",
>> +       },
>> +       { },
> 
> Can this be on one line?
> 
>           { .compatible     = "qcom,sm8150-usb-hs-phy", },
>           { .compatible     = "qcom,usb-snps-hs-7nm-phy", },
>           { }
> 
> Also drop comma on the last element so nothing can follow without
> causing compile error.
> 

Got it.

>> +};
>> +MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
>> +
>> +static int qcom_snps_hsphy_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct qcom_snps_hsphy *hsphy;
>> +       struct phy_provider *phy_provider;
>> +       struct phy *generic_phy;
>> +       struct resource *res;
>> +       int ret, i;
>> +       int num;
>> +
>> +       hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL);
>> +       if (!hsphy)
>> +               return -ENOMEM;
>> +
>> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       hsphy->base = devm_ioremap_resource(dev, res);
> 
> devm_platform_ioremap_resource()?
> 

Sure, will replace
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       hsphy->base = devm_ioremap_resource(dev, res);

to:

+	hsphy->base = devm_platform_ioremap_resource(pdev, 0);

>> +       if (IS_ERR(hsphy->base))
>> +               return PTR_ERR(hsphy->base);
>> +
>> +       hsphy->ref_clk = devm_clk_get(dev, "ref");
>> +       if (IS_ERR(hsphy->ref_clk)) {
>> +               ret = PTR_ERR(hsphy->ref_clk);
>> +               if (ret != -EPROBE_DEFER)
>> +                       dev_err(dev, "failed to get ref clk, %d\n", ret);
>> +               return ret;
>> +       }
>> +
>> +       hsphy->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
>> +       if (IS_ERR(hsphy->phy_reset)) {
>> +               dev_err(dev, "failed to get phy core reset\n");
>> +               return PTR_ERR(hsphy->phy_reset);
>> +       }
>> +
>> +       num = ARRAY_SIZE(hsphy->vregs);
>> +       for (i = 0; i < num; i++)
>> +               hsphy->vregs[i].supply = qcom_snps_hsphy_vreg_names[i];
>> +
>> +       ret = devm_regulator_bulk_get(dev, num, hsphy->vregs);
>> +       if (ret) {
>> +               if (ret != -EPROBE_DEFER)
>> +                       dev_err(dev, "failed to get regulator supplies: %d\n",
>> +                               ret);
>> +               return ret;
>> +       }
>> +
>> +       generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
>> +       if (IS_ERR(generic_phy)) {
>> +               ret = PTR_ERR(generic_phy);
>> +               dev_err(dev, "failed to create phy, %d\n", ret);
>> +               return ret;
>> +       }
>> +       hsphy->phy = generic_phy;
>> +
>> +       dev_set_drvdata(dev, hsphy);
>> +       phy_set_drvdata(generic_phy, hsphy);
>> +
>> +       phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +       if (!IS_ERR(phy_provider))
>> +               dev_info(dev, "Registered Qcom-SNPS HS phy\n");
> 
> dev_dbg()? Or just remove it?
> 

I'd like to keep some kind of print here.  Will replace with dev_dbg so
it can be enabled when required.  Thanks again!

>> +
>> +       return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static struct platform_driver qcom_snps_hsphy_driver = {
>> +       .probe          = qcom_snps_hsphy_probe,
>> +       .driver = {
>> +               .name   = "qcom-snps-hs-7nm-phy",
>> +               .of_match_table = qcom_snps_hsphy_of_match_table,
>> +       },
>> +};
>> +
>> +module_platform_driver(qcom_snps_hsphy_driver);
>> +
>> +MODULE_DESCRIPTION("Qualcomm 7nm USB HS PHY driver");

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux