On Tue, Mar 31, 2020 at 02:13:52PM +0200, Johan Jonker wrote:
> A test with the command below gives for example these warnings:
>
> arch/arm/boot/dts/rk3288-evb-act8846.dt.yaml: sram@ff720000:
> '#address-cells' is a required property
> arch/arm/boot/dts/rk3288-evb-act8846.dt.yaml: sram@ff720000:
> '#size-cells' is a required property
> arch/arm/boot/dts/rk3288-evb-act8846.dt.yaml: sram@ff720000:
> 'ranges' is a required property
>
> Fix this error by adding '#address-cells', '#size-cells' and
> 'ranges' to the 'rockchip,rk3288-pmu-sram' compatible node
> in rk3288.dtsi.
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/sram/sram.yaml
>
> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
> ---
> Not tested with hardware.
>
> Changed v2:
> Fix dtsi.
> ---
> arch/arm/boot/dts/rk3288.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 9c8741bb1..f102fec69 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -730,6 +730,9 @@
> pmu_sram: sram@ff720000 {
> compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
> reg = <0x0 0xff720000 0x0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0xff720000 0x1000>;
I think we should make these optional instead if there's no child nodes.
And if there are child nodes, then these will be required.
Rob
