This patch adds the DT binding documentation for the sensor interface module in Mediatek SoCs. Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx> --- .../bindings/media/mediatek-seninf.yaml | 219 ++++++++++++++++++ 1 file changed, 219 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek-seninf.yaml diff --git a/Documentation/devicetree/bindings/media/mediatek-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek-seninf.yaml new file mode 100644 index 000000000000..c9e5776a2bd0 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek-seninf.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek-seninf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek seninf MIPI-CSI2 host driver + +maintainers: + - Louis Kuo <louis.kuo@xxxxxxxxxxxx> + +description: | + Seninf MIPI-CSI2 host driver is a HW camera interface controller. It support + a widely adopted, simple, high-speed protocol primarily intended for + point-to-point image and video transmission between cameras and host devices. + +properties: + compatible: + const: mediatek,mt8183-seninf + + reg: + minItems: 2 + items: + - description: The Seninf main register region + - description: The RX register region + + reg-names: + minItems: 2 + items: + - const: base + - const: rx + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Seninf camsys clock + - description: Seninf top mux clock + + clock-names: + items: + - const: clk_cam_seninf + - const: clk_top_mux_seninf + + # See ./video-interfaces.txt for details + ports: + type: object + additionalProperties: false + + properties: + port@0: + type: object + description: connection point for sensor at port 0 + additionalProperties: false + + properties: + reg: + const: 0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + remote-endpoint: true + + port@1: + type: object + description: connection point for sensor at port 1 + additionalProperties: false + + properties: + reg: + const: 1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + remote-endpoint: true + + port@4: + type: object + description: connection point for camsys + additionalProperties: false + + properties: + reg: + const: 4 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - port@0 + - port@1 + - port@4 + +required: + - compatible + - interrupts + - clocks + - clock-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8183-power.h> + + parent0: parent@0 { + #address-cells = <2>; + #size-cells = <2>; + + seninf: seninf@1a040000 { + compatible = "mediatek,mt8183-seninf"; + reg = <0 0x1a040000 0 0x8000>, + <0 0x11c80000 0 0x6000>; + reg-names = "base", "rx"; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>; + clocks = <&camsys CLK_CAM_SENINF>, + <&topckgen CLK_TOP_MUX_SENINF>; + clock-names = "clk_cam_seninf", "clk_top_mux_seninf"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_in_bcam: endpoint { + data-lanes = <0 1 3 4>; + remote-endpoint = <&bcam_out>; + }; + }; + + port@1 { + reg = <1>; + + mipi_in_fcam: endpoint { + data-lanes = <1>; + remote-endpoint = <&fcam_out>; + }; + }; + + port@4 { + reg = <4>; + + seninf_camisp_endpoint: endpoint { + remote-endpoint = <&camisp_endpoint>; + }; + }; + }; + }; + + i2c2: i2c@11009000 { + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + wcam: camera@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + + port { + bcam_out: endpoint { + remote-endpoint = <&mipi_in_bcam>; + data-lanes = <0 1 3 4>; + }; + }; + }; + }; + + i2c4: i2c@11008000 { + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + ucam: camera@3c { + compatible = "ovti,ov2685"; + reg = <0x3c>; + + port { + fcam_out: endpoint { + remote-endpoint = <&mipi_in_fcam>; + data-lanes = <1>; + }; + }; + }; + }; + }; \ No newline at end of file -- 2.18.0
