On Thu, Apr 9, 2020 at 5:08 AM Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote: > > On Thu, Apr 9, 2020 at 12:52 AM Al Cooper <alcooperx@xxxxxxxxx> wrote: > > > > Add the build system changes needed to get the Broadcom STB XHCI, > > EHCI and OHCI functionality working. The OHCI support does not > > require anything unique to Broadcom so the standard ohci-platform > > driver is being used. The link order for XHCI was changed in the > > Makefile because of the way STB XHCI, EHCI and OHCI controllers > > share a port which requires that the XHCI driver be initialized > > first. Also update MAINTAINERS. > > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -3477,6 +3477,14 @@ S: Supported > > F: drivers/i2c/busses/i2c-brcmstb.c > > F: Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml > > > > +BROADCOM BRCMSTB USB EHCI DRIVER > > +M: Al Cooper <alcooperx@xxxxxxxxx> > > +L: linux-usb@xxxxxxxxxxxxxxx > > +L: bcm-kernel-feedback-list@xxxxxxxxxxxx > > +S: Maintained > > +F: drivers/usb/host/ehci-brcm.* > > +F: Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml > > This has ordering issues. > Run parse-maintainer.pl to fix. (Note, it creates by default a new > file, you might need to run diff manually to see the difference). I'm not sure what you mean. I ran "./scripts/parse-maintainers.pl" and did "diff MAINTAINERS MAINTAINERS.new" and there are no differences in or around my entry. Al > > -- > With Best Regards, > Andy Shevchenko
