On 08-04-20, 19:16, Rajendra Nayak wrote:
> With OPP core now supporting DVFS for IO devices, we have instances of
> IO devices (same IP block) which require an OPP on some platforms/SoCs
By OPP you mean both freq and voltage here ?
> while just needing to scale the clock on some others.
And only freq here ?
> In order to avoid conditional code in every driver which supports such
> devices (to check for availability of OPPs and then deciding to do
> either dev_pm_opp_set_rate() or clk_set_rate()) add support to manage
> empty OPP tables with a clk handle.
Why can't these devices have an opp table with just rate mentioned in each node
?
> This makes dev_pm_opp_set_rate() equivalent of a clk_set_rate() for
> devices with just a clk and no OPPs specified, and makes
> dev_pm_opp_set_rate(0) bail out without throwing an error.
>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> ---
> drivers/opp/core.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/opp/core.c b/drivers/opp/core.c
> index ba43e6a..e4f01e7 100644
> --- a/drivers/opp/core.c
> +++ b/drivers/opp/core.c
> @@ -819,6 +819,8 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
> if (unlikely(!target_freq)) {
> if (opp_table->required_opp_tables) {
> ret = _set_required_opps(dev, opp_table, NULL);
> + } else if (!_get_opp_count(opp_table)) {
> + return 0;
Why should anyone call this with target_freq = 0 ? I know it was required to
drop votes in the above case, but why here ?
> } else {
> dev_err(dev, "target frequency can't be 0\n");
> ret = -EINVAL;
> @@ -849,6 +851,18 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
> goto put_opp_table;
> }
>
> + /*
> + * For IO devices which require an OPP on some platforms/SoCs
> + * while just needing to scale the clock on some others
> + * we look for empty OPP tables with just a clock handle and
> + * scale only the clk. This makes dev_pm_opp_set_rate()
> + * equivalent to a clk_set_rate()
> + */
> + if (!_get_opp_count(opp_table)) {
> + ret = _generic_set_opp_clk_only(dev, clk, freq);
> + goto put_opp_table;
> + }
> +
Is this enough? _of_add_opp_table_v2() returns with error if there is no OPP
node within the table. Please give an example of how DT looks for the case you
want to support.
> temp_freq = old_freq;
> old_opp = _find_freq_ceil(opp_table, &temp_freq);
> if (IS_ERR(old_opp)) {
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
--
viresh
