Re: [PATCH 2/2 v6] iio: Add SEMTECH SX9310/9311 sensor driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 4, 2020 at 8:35 AM Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>
> On Thu,  2 Apr 2020 17:01:30 -0600
> Daniel Campello <campello@xxxxxxxxxxxx> wrote:
>
> > Add SEMTECH SX9310/9311 driver.
> >
> > The device has the following entry points:
> >
> > Usual frequency:
> > - sampling_frequency
> > - sampling_frequency_available
> >
> > Instant reading of current values for different sensors:
> > - in_proximity0_raw
> > - in_proximity1_raw
> > - in_proximity2_raw
> > - in_proximity3_comb_raw
> > and associated events in events/
> >
> > Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
> > Signed-off-by: Enrico Granata <egranata@xxxxxxxxxxxx>
> > Signed-off-by: Daniel Campello <campello@xxxxxxxxxxxx>
> > ---
> > v6 changes:
> >   - Fixed formatting
> >   - Changed to make use of device_get_match_data()
> >   - Switched to ->probe_new()
> Hi Daniel,
>
> That covers about half of what Andy raised in his review.
> I've highlighted a few of the other things inline, but all need to be
> addressed.   I'm not seeing a reply to v5 providing your arguments
> against his suggested changes so I'm surprised to not see them addressed
> in here.
>
> There are questions in his review as well that need addressing even if
> the answer is 'sure that will work ;)'
>
> Thanks,
>
> Jonathan

Hi Jonathan,

Sorry about that. I just sent a reply on the v5 comments and a v7
revision with one of them that I completely overlooked.

Thanks again for your review and all your help,
Regards,
Daniel
>
>
> > v5 changes:
> >   - Fixed size of allocated buffer to include timestamp
> >   - Changed string comparison to whoami comparison when probing and
> >     assigning device name
> > v4 changes:
> >   - Renamed in_proximity3_COMB_raw to in_proximity3_comb_raw and added
> >     documentation for it
> >   - Minor clean ups
> > v3 changes:
> >   - Fixed "Using plain integer as NULL pointer"
> > v2 changes:
> >   - Removed differential channels
> >   - Raw channels expose data from SX9310_REG_DIFF_MSB registers
> >   - 4th channel uses extend_name = COMB
> >   - Allocated data->buffer statically
> >   - Check whoami value against i2c / acpi device id
> >   - General clean up
> >
> >  .../ABI/testing/sysfs-bus-iio-sx9310          |   10 +
> >  drivers/iio/proximity/Kconfig                 |   13 +
> >  drivers/iio/proximity/Makefile                |    1 +
> >  drivers/iio/proximity/sx9310.c                | 1049 +++++++++++++++++
> >  4 files changed, 1073 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9310
> >  create mode 100644 drivers/iio/proximity/sx9310.c
> >
> > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9310 b/Documentation/ABI/testing/sysfs-bus-iio-sx9310
> > new file mode 100644
> > index 00000000000000..3ac7759013e5c4
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9310
> > @@ -0,0 +1,10 @@
> > +What:                /sys/bus/iio/devices/iio:deviceX/in_proximity3_comb_raw
> > +Date:                February 2019
> > +KernelVersion:       5.6
> > +Contact:     Daniel Campello <campello@xxxxxxxxxxxx>
> > +Description:
> > +             Proximity measurement indicating that some object is
> > +             near the combined sensor. The combined sensor presents
> > +             proximity measurements constructed by hardware by
> > +             combining measurements taken from a given set of
> > +             physical sensors.
> > diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
> > index 37606d400805a9..d57e8cc17e42d6 100644
> > --- a/drivers/iio/proximity/Kconfig
> > +++ b/drivers/iio/proximity/Kconfig
> > @@ -101,6 +101,19 @@ config SRF04
> >         To compile this driver as a module, choose M here: the
> >         module will be called srf04.
> >
> > +config SX9310
> > +     tristate "SX9310/SX9311 Semtech proximity sensor"
> > +     select IIO_BUFFER
> > +     select IIO_TRIGGERED_BUFFER
> > +     select REGMAP_I2C
> > +     depends on I2C
> > +     help
> > +       Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
> > +       proximity/button sensor.
> > +
> > +       To compile this driver as a module, choose M here: the
> > +       module will be called sx9310.
> > +
> >  config SX9500
> >       tristate "SX9500 Semtech proximity sensor"
> >       select IIO_BUFFER
> > diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
> > index c591b019304e7f..25e5a04da101c5 100644
> > --- a/drivers/iio/proximity/Makefile
> > +++ b/drivers/iio/proximity/Makefile
> > @@ -12,6 +12,7 @@ obj-$(CONFIG_PING)          += ping.o
> >  obj-$(CONFIG_RFD77402)               += rfd77402.o
> >  obj-$(CONFIG_SRF04)          += srf04.o
> >  obj-$(CONFIG_SRF08)          += srf08.o
> > +obj-$(CONFIG_SX9310)         += sx9310.o
> >  obj-$(CONFIG_SX9500)         += sx9500.o
> >  obj-$(CONFIG_VL53L0X_I2C)    += vl53l0x-i2c.o
> >
> > diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> > new file mode 100644
> > index 00000000000000..7d31901e45df4a
> > --- /dev/null
> > +++ b/drivers/iio/proximity/sx9310.c
> > @@ -0,0 +1,1049 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2018 Google LLC.
> > + *
> > + * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution.
> > + * Based on SX9500 driver and Semtech driver using the input framework
> > + * <https://my.syncplicity.com/share/teouwsim8niiaud/
> > + *          linux-driver-SX9310_NoSmartHSensing>.
> > + * Reworked April 2019 by Evan Green <evgreen@xxxxxxxxxxxx>
> > + * and January 2020 by Daniel Campello <campello@xxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/delay.h>
> > +#include <linux/i2c.h>
> > +#include <linux/irq.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/pm.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +
> > +#include <linux/iio/buffer.h>
> > +#include <linux/iio/events.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/sysfs.h>
> > +#include <linux/iio/trigger.h>
> > +#include <linux/iio/triggered_buffer.h>
> > +#include <linux/iio/trigger_consumer.h>
> > +
> > +/* Register definitions. */
> > +#define SX9310_REG_IRQ_SRC                           0x00
> > +#define SX9310_REG_STAT0                             0x01
> > +#define SX9310_REG_STAT1                             0x02
> > +#define SX9310_REG_IRQ_MSK                           0x03
> > +#define   SX9310_CONVDONE_IRQ                                BIT(3)
> > +#define   SX9310_FAR_IRQ                             BIT(5)
> > +#define   SX9310_CLOSE_IRQ                           BIT(6)
> > +#define   SX9310_EVENT_IRQ           (SX9310_FAR_IRQ | SX9310_CLOSE_IRQ)
> > +#define SX9310_REG_IRQ_FUNC                          0x04
> > +
> > +#define SX9310_REG_PROX_CTRL0                                0x10
> > +#define   SX9310_REG_PROX_CTRL0_PROXSTAT2            0x10
> > +#define   SX9310_REG_PROX_CTRL0_EN_MASK                      0x0F
> > +#define SX9310_REG_PROX_CTRL1                                0x11
> > +#define SX9310_REG_PROX_CTRL2                                0x12
> > +#define   SX9310_REG_PROX_CTRL2_COMBMODE_ALL         0x80
> > +#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC     0x04
> > +#define SX9310_REG_PROX_CTRL3                                0x13
> > +#define   SX9310_REG_PROX_CTRL3_GAIN0_X8             0x0c
> > +#define   SX9310_REG_PROX_CTRL3_GAIN12_X4            0x02
> > +#define SX9310_REG_PROX_CTRL4                                0x14
> > +#define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST    0x07
> > +#define SX9310_REG_PROX_CTRL5                                0x15
> > +#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL          0xc0
> > +#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1              0x04
> > +#define   SX9310_REG_PROX_CTRL5_RAWFILT_1P25         0x02
> > +#define SX9310_REG_PROX_CTRL6                                0x16
> > +#define   SX9310_REG_PROX_CTRL6_COMP_COMMON          0x20
> > +#define SX9310_REG_PROX_CTRL7                                0x17
> > +#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2         0x08
> > +#define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_512               0x05
> > +#define SX9310_REG_PROX_CTRL8                                0x18
> > +#define SX9310_REG_PROX_CTRL9                                0x19
> > +#define   SX9310_REG_PROX_CTRL8_9_PTHRESH12_28               0x40
> > +#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96         0x88
> > +#define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900     0x03
> > +#define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500    0x05
> > +#define SX9310_REG_PROX_CTRL10                               0x1a
> > +#define   SX9310_REG_PROX_CTRL10_HYST_6PCT           0x10
> > +#define   SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8    0x12
> > +#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8              0x03
> > +#define SX9310_REG_PROX_CTRL11                               0x1b
> > +#define SX9310_REG_PROX_CTRL12                               0x1c
> > +#define SX9310_REG_PROX_CTRL13                               0x1d
> > +#define SX9310_REG_PROX_CTRL14                               0x1e
> > +#define SX9310_REG_PROX_CTRL15                               0x1f
> > +#define SX9310_REG_PROX_CTRL16                               0x20
> > +#define SX9310_REG_PROX_CTRL17                               0x21
> > +#define SX9310_REG_PROX_CTRL18                               0x22
> > +#define SX9310_REG_PROX_CTRL19                               0x23
> > +#define SX9310_REG_SAR_CTRL0                         0x2a
> > +#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES              0x40
> > +#define   SX9310_REG_SAR_CTRL0_SARHYST_8             0x10
> > +#define SX9310_REG_SAR_CTRL1                         0x2b
> > +/* Each increment of the slope register is 0.0078125. */
> > +#define   SX9310_REG_SAR_CTRL1_SLOPE(_hnslope)               (_hnslope / 78125)
> > +#define SX9310_REG_SAR_CTRL2                         0x2c
> > +#define   SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT     0x3c
> > +
> > +#define SX9310_REG_SENSOR_SEL                                0x30
> > +
> > +#define SX9310_REG_USE_MSB                           0x31
> > +#define SX9310_REG_USE_LSB                           0x32
> > +
> > +#define SX9310_REG_AVG_MSB                           0x33
> > +#define SX9310_REG_AVG_LSB                           0x34
> > +
> > +#define SX9310_REG_DIFF_MSB                          0x35
> > +#define SX9310_REG_DIFF_LSB                          0x36
> > +
> > +#define SX9310_REG_OFFSET_MSB                                0x37
> > +#define SX9310_REG_OFFSET_LSB                                0x38
> > +
> > +#define SX9310_REG_SAR_MSB                           0x39
> > +#define SX9310_REG_SAR_LSB                           0x3a
> > +
> > +#define SX9310_REG_I2CADDR                           0x40
> > +#define SX9310_REG_PAUSE                             0x41
> > +#define SX9310_REG_WHOAMI                            0x42
> > +#define   SX9310_WHOAMI_VALUE                                0x01
> > +#define   SX9311_WHOAMI_VALUE                                0x02
> > +
> > +#define SX9310_REG_RESET                             0x7f
> > +#define   SX9310_SOFT_RESET                          0xde
> > +
> > +#define SX9310_SCAN_PERIOD_MASK                              GENMASK(7, 4)
> > +#define SX9310_SCAN_PERIOD_SHIFT                     4
> > +
> > +#define SX9310_COMPSTAT_MASK                         GENMASK(3, 0)
> > +
> > +/* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
> > +#define SX9310_NUM_CHANNELS                          4
> > +#define SX9310_CHAN_ENABLED_MASK                     GENMASK(3, 0)
> > +
> > +struct sx9310_data {
> > +     /* Serialize access to registers and channel configuration */
> > +     struct mutex mutex;
> > +     struct i2c_client *client;
> > +     struct iio_trigger *trig;
> > +     struct regmap *regmap;
> > +     /*
> > +      * Last reading of the proximity status for each channel.
> > +      * We only send an event to user space when this changes.
> > +      */
> > +     bool prox_stat[SX9310_NUM_CHANNELS];
> > +     bool trigger_enabled;
> > +     /* 64-bit data + 64-bit timestamp buffer */
> > +     __be16 buffer[SX9310_NUM_CHANNELS + 4];
> > +     /* Remember enabled channels and sample rate during suspend. */
> > +     unsigned int suspend_ctrl0;
> > +     struct completion completion;
> > +     unsigned long chan_read, chan_event;
> > +     int channel_users[SX9310_NUM_CHANNELS];
> > +     int whoami;
> > +};
> > +
> > +static const struct iio_event_spec sx9310_events[] = {
> > +     {
> > +             .type = IIO_EV_TYPE_THRESH,
> > +             .dir = IIO_EV_DIR_EITHER,
> > +             .mask_separate = BIT(IIO_EV_INFO_ENABLE),
> > +     },
> > +};
> > +
> > +#define SX9310_NAMED_CHANNEL(idx, name)                                       \
> > +     {                                                                \
> > +             .type = IIO_PROXIMITY,                                   \
> > +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),            \
> > +             .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> > +             .indexed = 1,                                            \
> > +             .channel = idx,                                          \
> > +             .extend_name = name,                                     \
> > +             .address = SX9310_REG_DIFF_MSB,                          \
> > +             .event_spec = sx9310_events,                             \
> > +             .num_event_specs = ARRAY_SIZE(sx9310_events),            \
> > +             .scan_index = idx,                                       \
> > +             .scan_type = {                                           \
> > +                     .sign = 's',                                     \
> > +                     .realbits = 12,                                  \
> > +                     .storagebits = 16,                               \
> > +                     .endianness = IIO_BE,                            \
> > +             },                                                       \
> > +     }
> > +#define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL)
> > +
> > +static const struct iio_chan_spec sx9310_channels[] = {
> > +     SX9310_CHANNEL(0),                      /* CS0 */
> > +     SX9310_CHANNEL(1),                      /* CS1 */
> > +     SX9310_CHANNEL(2),                      /* CS2 */
> > +     SX9310_NAMED_CHANNEL(3, "comb"),        /* COMB */
> > +
> > +     IIO_CHAN_SOFT_TIMESTAMP(4),
> > +};
> > +
> > +/*
> > + * Each entry contains the integer part (val) and the fractional part, in micro
> > + * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
> > + */
> > +static const struct {
> > +     int val;
> > +     int val2;
> > +} sx9310_samp_freq_table[] = {
> > +     { 500, 0 }, /* 0000: Min (no idle time) */
> > +     { 66, 666666 }, /* 0001: 15 ms */
> > +     { 33, 333333 }, /* 0010: 30 ms (Typ.) */
> > +     { 22, 222222 }, /* 0011: 45 ms */
> > +     { 16, 666666 }, /* 0100: 60 ms */
> > +     { 11, 111111 }, /* 0101: 90 ms */
> > +     { 8, 333333 }, /* 0110: 120 ms */
> > +     { 5, 0 }, /* 0111: 200 ms */
> > +     { 2, 500000 }, /* 1000: 400 ms */
> > +     { 1, 666666 }, /* 1001: 600 ms */
> > +     { 1, 250000 }, /* 1010: 800 ms */
> > +     { 1, 0 }, /* 1011: 1 s */
> > +     { 0, 500000 }, /* 1100: 2 s */
> > +     { 0, 333333 }, /* 1101: 3 s */
> > +     { 0, 250000 }, /* 1110: 4 s */
> > +     { 0, 200000 }, /* 1111: 5 s */
> > +};
> > +static const unsigned int sx9310_scan_period_table[] = {
> > +     2,   15,  30,  45,   60,   90,   120,  200,
> > +     400, 600, 800, 1000, 2000, 3000, 4000, 5000,
> > +};
> > +
> > +static ssize_t sx9310_show_samp_freq_avail(struct device *dev,
> > +                                        struct device_attribute *attr,
> > +                                        char *buf)
> > +{
> > +     size_t len = 0;
> > +     int i;
> > +
> > +     for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
> > +             len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%d ",
> > +                              sx9310_samp_freq_table[i].val,
> > +                              sx9310_samp_freq_table[i].val2);
> > +     buf[len - 1] = '\n';
> > +     return len;
> > +}
> > +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sx9310_show_samp_freq_avail);
> > +
> > +static const struct regmap_range sx9310_writable_reg_ranges[] = {
> > +     regmap_reg_range(SX9310_REG_IRQ_MSK, SX9310_REG_IRQ_FUNC),
> > +     regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
> > +     regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
> > +     regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SENSOR_SEL),
> > +     regmap_reg_range(SX9310_REG_OFFSET_MSB, SX9310_REG_OFFSET_LSB),
> > +     regmap_reg_range(SX9310_REG_PAUSE, SX9310_REG_PAUSE),
> > +     regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
> > +};
> > +
> > +static const struct regmap_access_table sx9310_writeable_regs = {
> > +     .yes_ranges = sx9310_writable_reg_ranges,
> > +     .n_yes_ranges = ARRAY_SIZE(sx9310_writable_reg_ranges),
> > +};
> > +
> > +static const struct regmap_range sx9310_readable_reg_ranges[] = {
> > +     regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_IRQ_FUNC),
> > +     regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
> > +     regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
> > +     regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
> > +     regmap_reg_range(SX9310_REG_I2CADDR, SX9310_REG_WHOAMI),
> > +     regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
> > +};
> > +
> > +static const struct regmap_access_table sx9310_readable_regs = {
> > +     .yes_ranges = sx9310_readable_reg_ranges,
> > +     .n_yes_ranges = ARRAY_SIZE(sx9310_readable_reg_ranges),
> > +};
> > +
> > +static const struct regmap_range sx9310_volatile_reg_ranges[] = {
> > +     regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_STAT1),
> > +     regmap_reg_range(SX9310_REG_USE_MSB, SX9310_REG_DIFF_LSB),
> > +     regmap_reg_range(SX9310_REG_SAR_MSB, SX9310_REG_SAR_LSB),
> > +     regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
> > +};
> > +
> > +static const struct regmap_access_table sx9310_volatile_regs = {
> > +     .yes_ranges = sx9310_volatile_reg_ranges,
> > +     .n_yes_ranges = ARRAY_SIZE(sx9310_volatile_reg_ranges),
> > +};
> > +
> > +static const struct regmap_config sx9310_regmap_config = {
> > +     .reg_bits = 8,
> > +     .val_bits = 8,
> > +
> > +     .max_register = SX9310_REG_RESET,
> > +     .cache_type = REGCACHE_RBTREE,
> > +
> > +     .wr_table = &sx9310_writeable_regs,
> > +     .rd_table = &sx9310_readable_regs,
> > +     .volatile_table = &sx9310_volatile_regs,
> > +};
> > +
> > +static int sx9310_update_chan_en(struct sx9310_data *data,
> > +                              unsigned long chan_read,
> > +                              unsigned long chan_event)
> > +{
> > +     int ret;
> > +     unsigned long channels = chan_read | chan_event;
> > +
> > +     if ((data->chan_read | data->chan_event) != channels) {
> > +             ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
> > +                                      SX9310_CHAN_ENABLED_MASK, channels);
> > +             if (ret)
> > +                     return ret;
> > +     }
> > +     data->chan_read = chan_read;
> > +     data->chan_event = chan_event;
> > +     return 0;
> > +}
> > +
> > +static int sx9310_get_read_channel(struct sx9310_data *data, int channel)
> > +{
> > +     return sx9310_update_chan_en(data, data->chan_read | BIT(channel),
> > +                                  data->chan_event);
> > +}
> > +
> > +static int sx9310_put_read_channel(struct sx9310_data *data, int channel)
> > +{
> > +     return sx9310_update_chan_en(data, data->chan_read & ~BIT(channel),
> > +                                  data->chan_event);
> > +}
> > +
> > +static int sx9310_get_event_channel(struct sx9310_data *data, int channel)
> > +{
> > +     return sx9310_update_chan_en(data, data->chan_read,
> > +                                  data->chan_event | BIT(channel));
> > +}
> > +
> > +static int sx9310_put_event_channel(struct sx9310_data *data, int channel)
> > +{
> > +     return sx9310_update_chan_en(data, data->chan_read,
> > +                                  data->chan_event & ~BIT(channel));
> > +}
> > +
> > +static int sx9310_enable_irq(struct sx9310_data *data, unsigned int irq)
> > +{
> > +     return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, irq);
> > +}
> > +
> > +static int sx9310_disable_irq(struct sx9310_data *data, unsigned int irq)
> > +{
> > +     return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, 0);
> > +}
> > +
> > +static int sx9310_read_prox_data(struct sx9310_data *data,
> > +                              const struct iio_chan_spec *chan, __be16 *val)
> > +{
> > +     int ret;
> > +
> > +     ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     return regmap_bulk_read(data->regmap, chan->address, val,
> > +                             sizeof(__be16));
> > +}
> > +
> > +/*
> > + * If we have no interrupt support, we have to wait for a scan period
> > + * after enabling a channel to get a result.
> > + */
> > +static int sx9310_wait_for_sample(struct sx9310_data *data)
> > +{
> > +     int ret;
> > +     unsigned int val;
> > +
> > +     ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     val = (val & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
> > +
> > +     msleep(sx9310_scan_period_table[val]);
> > +
> > +     return 0;
> > +}
> > +
> > +static int sx9310_read_proximity(struct sx9310_data *data,
> > +                              const struct iio_chan_spec *chan, int *val)
> > +{
> > +     int ret = 0;
> > +     __be16 rawval;
> > +
> > +     mutex_lock(&data->mutex);
> > +
> > +     ret = sx9310_get_read_channel(data, chan->channel);
> > +     if (ret < 0)
> > +             goto out;
> > +
> > +     ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
> > +     if (ret < 0)
> > +             goto out_put_channel;
> > +
> > +     mutex_unlock(&data->mutex);
> > +
> > +     if (data->client->irq > 0) {
> > +             ret = wait_for_completion_interruptible(&data->completion);
> > +             reinit_completion(&data->completion);
> > +     } else {
> > +             ret = sx9310_wait_for_sample(data);
> > +     }
> > +
> > +     mutex_lock(&data->mutex);
> > +
> > +     if (ret < 0)
> > +             goto out_disable_irq;
> > +
> > +     ret = sx9310_read_prox_data(data, chan, &rawval);
> > +     if (ret < 0)
> > +             goto out_disable_irq;
> > +
> > +     *val = sign_extend32(be16_to_cpu(rawval),
> > +                          chan->address == SX9310_REG_DIFF_MSB ? 11 : 15);
> > +
> > +     ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> > +     if (ret < 0)
> > +             goto out_put_channel;
> > +
> > +     ret = sx9310_put_read_channel(data, chan->channel);
> > +     if (ret < 0)
> > +             goto out;
> > +
> > +     mutex_unlock(&data->mutex);
> > +
> > +     return IIO_VAL_INT;
> > +
> > +out_disable_irq:
> > +     sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> > +out_put_channel:
> > +     sx9310_put_read_channel(data, chan->channel);
> > +out:
> > +     mutex_unlock(&data->mutex);
> > +
> > +     return ret;
> > +}
> > +
> > +static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
> > +{
> > +     unsigned int regval;
> > +     int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
> > +
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     regval = (regval & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
> > +     *val = sx9310_samp_freq_table[regval].val;
> > +     *val2 = sx9310_samp_freq_table[regval].val2;
> > +
> > +     return IIO_VAL_INT_PLUS_MICRO;
> > +}
> > +
> > +static int sx9310_read_raw(struct iio_dev *indio_dev,
> > +                        const struct iio_chan_spec *chan, int *val,
> > +                        int *val2, long mask)
> > +{
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     int ret;
> > +
> > +     if (chan->type != IIO_PROXIMITY)
> > +             return -EINVAL;
> > +
> > +     switch (mask) {
> > +     case IIO_CHAN_INFO_RAW:
> > +             ret = iio_device_claim_direct_mode(indio_dev);
> > +             if (ret)
> > +                     return ret;
> > +
> > +             ret = sx9310_read_proximity(data, chan, val);
> > +             iio_device_release_direct_mode(indio_dev);
> > +             return ret;
> > +     case IIO_CHAN_INFO_SAMP_FREQ:
> > +             return sx9310_read_samp_freq(data, val, val2);
> > +     default:
> > +             return -EINVAL;
> > +     }
> > +}
> > +
> > +static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
> > +{
> > +     int i, ret;
> > +
> > +     for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
> > +             if (val == sx9310_samp_freq_table[i].val &&
> > +                 val2 == sx9310_samp_freq_table[i].val2)
> > +                     break;
> > +
> > +     if (i == ARRAY_SIZE(sx9310_samp_freq_table))
> > +             return -EINVAL;
> > +
> > +     mutex_lock(&data->mutex);
> > +
> > +     ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
> > +                              SX9310_SCAN_PERIOD_MASK,
> > +                              i << SX9310_SCAN_PERIOD_SHIFT);
> > +
> > +     mutex_unlock(&data->mutex);
> > +
> > +     return ret;
> > +}
> > +
> > +static int sx9310_write_raw(struct iio_dev *indio_dev,
> > +                         const struct iio_chan_spec *chan, int val, int val2,
> > +                         long mask)
> > +{
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +
> > +     if (chan->type != IIO_PROXIMITY)
> > +             return -EINVAL;
> > +
> > +     if (mask != IIO_CHAN_INFO_SAMP_FREQ)
> > +             return -EINVAL;
> > +
> > +     return sx9310_set_samp_freq(data, val, val2);
> > +}
> > +
> > +static irqreturn_t sx9310_irq_handler(int irq, void *private)
> > +{
> > +     struct iio_dev *indio_dev = private;
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +
> > +     if (data->trigger_enabled)
> > +             iio_trigger_poll(data->trig);
> > +
> > +     /*
> > +      * Even if no event is enabled, we need to wake the thread to clear the
> > +      * interrupt state by reading SX9310_REG_IRQ_SRC.
> > +      * It is not possible to do that here because regmap_read takes a mutex.
> > +      */
> > +     return IRQ_WAKE_THREAD;
> > +}
> > +
> > +static void sx9310_push_events(struct iio_dev *indio_dev)
> > +{
> > +     int ret;
> > +     unsigned int val, chan;
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     s64 timestamp = iio_get_time_ns(indio_dev);
> > +
> > +     /* Read proximity state on all channels */
> > +     ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
> > +     if (ret < 0) {
> > +             dev_err(&data->client->dev, "i2c transfer error in irq\n");
> > +             return;
> > +     }
> > +
> > +     for_each_set_bit(chan, &data->chan_event, SX9310_NUM_CHANNELS) {
> > +             int dir;
> > +             u64 ev;
> > +             bool new_prox = val & BIT(chan);
> > +
> > +             if (new_prox == data->prox_stat[chan])
> > +                     /* No change on this channel. */
> > +                     continue;
> > +
> > +             dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
> > +             ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
> > +                                       IIO_EV_TYPE_THRESH, dir);
> > +
> > +             iio_push_event(indio_dev, ev, timestamp);
> > +             data->prox_stat[chan] = new_prox;
> > +     }
> > +}
> > +
> > +static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
> > +{
> > +     struct iio_dev *indio_dev = private;
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     int ret;
> > +     unsigned int val;
> > +
> > +     mutex_lock(&data->mutex);
> > +
> > +     ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
> > +     if (ret < 0) {
> > +             dev_err(&data->client->dev, "i2c transfer error in irq\n");
> > +             goto out;
> > +     }
> > +
> > +     if (val & SX9310_EVENT_IRQ)
> > +             sx9310_push_events(indio_dev);
> > +
> > +     if (val & SX9310_CONVDONE_IRQ)
> > +             complete(&data->completion);
> > +
> > +out:
> > +     mutex_unlock(&data->mutex);
> > +
> > +     return IRQ_HANDLED;
> > +}
> > +
> > +static int sx9310_read_event_config(struct iio_dev *indio_dev,
> > +                                 const struct iio_chan_spec *chan,
> > +                                 enum iio_event_type type,
> > +                                 enum iio_event_direction dir)
> > +{
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +
> > +     return !!(data->chan_event & BIT(chan->channel));
> > +}
> > +
> > +static int sx9310_write_event_config(struct iio_dev *indio_dev,
> > +                                  const struct iio_chan_spec *chan,
> > +                                  enum iio_event_type type,
> > +                                  enum iio_event_direction dir, int state)
> > +{
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     int ret;
> > +
> > +     /* If the state hasn't changed, there's nothing to do. */
> > +     if (!!(data->chan_event & BIT(chan->channel)) == state)
> > +             return 0;
> > +
> > +     mutex_lock(&data->mutex);
> > +     if (state) {
> > +             ret = sx9310_get_event_channel(data, chan->channel);
> > +             if (ret < 0)
> > +                     goto out_unlock;
> > +             if (!(data->chan_event & ~BIT(chan->channel))) {
> > +                     ret = sx9310_enable_irq(data, SX9310_EVENT_IRQ);
> > +                     if (ret < 0)
> > +                             sx9310_put_event_channel(data, chan->channel);
> > +             }
> > +     } else {
> > +             ret = sx9310_put_event_channel(data, chan->channel);
> > +             if (ret < 0)
> > +                     goto out_unlock;
> > +             if (!data->chan_event) {
> > +                     ret = sx9310_disable_irq(data, SX9310_EVENT_IRQ);
> > +                     if (ret < 0)
> > +                             sx9310_get_event_channel(data, chan->channel);
> > +             }
> > +     }
> > +
> > +out_unlock:
> > +     mutex_unlock(&data->mutex);
> > +     return ret;
> > +}
> > +
> > +static struct attribute *sx9310_attributes[] = {
> > +     &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
> > +     NULL
> > +};
> > +
> > +static const struct attribute_group sx9310_attribute_group = {
> > +     .attrs = sx9310_attributes,
> > +};
> > +
> > +static const struct iio_info sx9310_info = {
> > +     .attrs = &sx9310_attribute_group,
> > +     .read_raw = sx9310_read_raw,
> > +     .write_raw = sx9310_write_raw,
> > +     .read_event_config = sx9310_read_event_config,
> > +     .write_event_config = sx9310_write_event_config,
> > +};
> > +
> > +static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
> > +{
> > +     struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     int ret = 0;
> > +
> > +     mutex_lock(&data->mutex);
> > +
> > +     if (state)
> > +             ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
> > +     else if (!data->chan_read)
> > +             ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> > +     if (ret < 0)
> > +             goto out;
> > +
> > +     data->trigger_enabled = state;
> > +
> > +out:
> > +     mutex_unlock(&data->mutex);
> > +
> > +     return ret;
> > +}
> > +
> > +static const struct iio_trigger_ops sx9310_trigger_ops = {
> > +     .set_trigger_state = sx9310_set_trigger_state,
> > +};
> > +
> > +static irqreturn_t sx9310_trigger_handler(int irq, void *private)
> > +{
> > +     struct iio_poll_func *pf = private;
> > +     struct iio_dev *indio_dev = pf->indio_dev;
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     __be16 val;
> > +     int bit, ret, i = 0;
> > +
> > +     mutex_lock(&data->mutex);
> > +
> > +     for_each_set_bit(bit, indio_dev->active_scan_mask,
> > +                      indio_dev->masklength) {
> > +             ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
> > +                                         &val);
> > +             if (ret < 0)
> > +                     goto out;
> > +
> > +             data->buffer[i++] = val;
> > +     }
> > +
> > +     iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
> > +                                        pf->timestamp);
> > +
> > +out:
> > +     mutex_unlock(&data->mutex);
> > +
> > +     iio_trigger_notify_done(indio_dev->trig);
> > +
> > +     return IRQ_HANDLED;
> > +}
> > +
> > +static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
> > +{
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     unsigned long channels = 0;
> > +     int bit, ret;
> > +
> > +     mutex_lock(&data->mutex);
> > +     for_each_set_bit(bit, indio_dev->active_scan_mask,
> > +                      indio_dev->masklength)
> > +             __set_bit(indio_dev->channels[bit].channel, &channels);
> > +
> > +     ret = sx9310_update_chan_en(data, channels, data->chan_event);
> > +     mutex_unlock(&data->mutex);
> > +     return ret;
> > +}
> > +
> > +static int sx9310_buffer_postdisable(struct iio_dev *indio_dev)
> > +{
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     int ret;
> > +
> > +     mutex_lock(&data->mutex);
> > +     ret = sx9310_update_chan_en(data, 0, data->chan_event);
> > +     mutex_unlock(&data->mutex);
> > +     return ret;
> > +}
> > +
> > +static const struct iio_buffer_setup_ops sx9310_buffer_setup_ops = {
> > +     .preenable = sx9310_buffer_preenable,
> > +     .postenable = iio_triggered_buffer_postenable,
> > +     .predisable = iio_triggered_buffer_predisable,
> > +     .postdisable = sx9310_buffer_postdisable,
> > +};
> > +
> > +struct sx9310_reg_default {
> > +     u8 reg;
> > +     u8 def;
> > +};
> > +
> > +#define SX_INIT(_reg, _def)                  \
> > +     {                                       \
> > +             .reg = SX9310_REG_##_reg,       \
> > +             .def = _def,                    \
> > +     }
> > +
> > +static const struct sx9310_reg_default sx9310_default_regs[] = {
> > +     SX_INIT(IRQ_MSK, 0x00),
> > +     SX_INIT(IRQ_FUNC, 0x00),
> > +     /*
> > +      * The lower 4 bits should not be set as it enable sensors measurements.
> > +      * Turning the detection on before the configuration values are set to
> > +      * good values can cause the device to return erroneous readings.
> > +      */
> > +     SX_INIT(PROX_CTRL0, SX9310_REG_PROX_CTRL0_PROXSTAT2),
> > +     SX_INIT(PROX_CTRL1, 0x00),
> > +     SX_INIT(PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_ALL |
> > +                         SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC),
> > +     SX_INIT(PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
> > +                         SX9310_REG_PROX_CTRL3_GAIN12_X4),
> > +     SX_INIT(PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST),
> > +     SX_INIT(PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
> > +                         SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
> > +                         SX9310_REG_PROX_CTRL5_RAWFILT_1P25),
> > +     SX_INIT(PROX_CTRL6, SX9310_REG_PROX_CTRL6_COMP_COMMON),
> > +     SX_INIT(PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
> > +                         SX9310_REG_PROX_CTRL7_AVGPOSFILT_512),
> > +     SX_INIT(PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
> > +                         SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500),
> > +     SX_INIT(PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 |
> > +                         SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900),
> > +     SX_INIT(PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
> > +                          SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 |
> > +                          SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8),
> > +     SX_INIT(PROX_CTRL11, 0x00),
> > +     SX_INIT(PROX_CTRL12, 0x00),
> > +     SX_INIT(PROX_CTRL13, 0x00),
> > +     SX_INIT(PROX_CTRL14, 0x00),
> > +     SX_INIT(PROX_CTRL15, 0x00),
> > +     SX_INIT(PROX_CTRL16, 0x00),
> > +     SX_INIT(PROX_CTRL17, 0x00),
> > +     SX_INIT(PROX_CTRL18, 0x00),
> > +     SX_INIT(PROX_CTRL19, 0x00),
> > +     SX_INIT(SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
> > +                        SX9310_REG_SAR_CTRL0_SARHYST_8),
> > +     SX_INIT(SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250)),
> > +     SX_INIT(SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT),
> > +};
> > +
> > +#undef SX_INIT
> > +
> > +/* Activate all channels and perform an initial compensation. */
> > +static int sx9310_init_compensation(struct iio_dev *indio_dev)
> > +{
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     int i, ret;
> > +     unsigned int val;
> > +     unsigned int ctrl0;
> > +
> > +     ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     /* run the compensation phase on all channels */
> > +     ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
> > +                        ctrl0 | SX9310_REG_PROX_CTRL0_EN_MASK);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     for (i = 100; i >= 0; i--) {
> > +             msleep(20);
> > +             ret = regmap_read(data->regmap, SX9310_REG_STAT1, &val);
> > +             if (ret < 0)
> > +                     goto out;
> > +             if (!(val & SX9310_COMPSTAT_MASK))
> > +                     break;
> > +     }
> > +
> > +     if (i < 0) {
> > +             dev_err(&data->client->dev,
> > +                     "initial compensation timed out: 0x%02x", val);
> > +             ret = -ETIMEDOUT;
> > +     }
> > +
> > +out:
> > +     regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
> > +     return ret;
> > +}
> > +
> > +static int sx9310_init_device(struct iio_dev *indio_dev)
> > +{
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     const struct sx9310_reg_default *initval;
> > +     int ret;
> > +     unsigned int i, val;
> > +
> > +     ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     usleep_range(1000, 2000); /* power-up time is ~1ms. */
> > +
> > +     /* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
> > +     ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     /* Program some sane defaults. */
> > +     for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
> > +             initval = &sx9310_default_regs[i];
> > +             ret = regmap_write(data->regmap, initval->reg, initval->def);
> > +             if (ret < 0)
> > +                     return ret;
> > +     }
> > +
> > +     return sx9310_init_compensation(indio_dev);
> > +}
> > +
> > +static int sx9310_set_indio_dev_name(struct device *dev,
> > +                                  struct iio_dev *indio_dev, int whoami)
> > +{
> > +     if ((int)device_get_match_data(dev) != whoami)
> > +             dev_err(dev, "WHOAMI does not match device data: %s", whoami);
> > +
> > +     switch (whoami) {
> > +     case SX9310_WHOAMI_VALUE:
> > +             indio_dev->name = "sx9310";
> > +             break;
> > +     case SX9311_WHOAMI_VALUE:
> > +             indio_dev->name = "sx9311";
> > +             break;
> > +     default:
> > +             dev_err(dev, "unexpected WHOAMI response: %u", whoami);
> > +             return -ENODEV;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static int sx9310_probe(struct i2c_client *client)
> > +{
> > +     int ret;
> > +     struct device *dev = &client->dev;
> > +     struct iio_dev *indio_dev;
> > +     struct sx9310_data *data;
> > +
> > +     indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> > +     if (!indio_dev)
> > +             return -ENOMEM;
> > +
> > +     data = iio_priv(indio_dev);
> > +     data->client = client;
> > +     mutex_init(&data->mutex);
> > +     init_completion(&data->completion);
> > +
> > +     data->regmap = devm_regmap_init_i2c(client, &sx9310_regmap_config);
> > +     if (IS_ERR(data->regmap))
> > +             return PTR_ERR(data->regmap);
> > +
> > +     ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
> > +     if (ret < 0) {
> > +             dev_err(dev, "error in reading WHOAMI register: %d", ret);
> > +             return ret;
> > +     }
> > +
> > +     ret = sx9310_set_indio_dev_name(dev, indio_dev, data->whoami);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(dev));
> > +     indio_dev->dev.parent = dev;
> > +     indio_dev->channels = sx9310_channels;
> > +     indio_dev->num_channels = ARRAY_SIZE(sx9310_channels);
> > +     indio_dev->info = &sx9310_info;
> > +     indio_dev->modes = INDIO_DIRECT_MODE;
> > +     i2c_set_clientdata(client, indio_dev);
> > +
> > +     ret = sx9310_init_device(indio_dev);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     if (client->irq) {
> > +             ret = devm_request_threaded_irq(dev, client->irq,
> > +                                             sx9310_irq_handler,
> > +                                             sx9310_irq_thread_handler,
> > +                                             IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> > +                                             "sx9310_event", indio_dev);
> > +             if (ret < 0)
> > +                     return ret;
> > +
> > +             data->trig = devm_iio_trigger_alloc(
> > +                     dev, "%s-dev%d", indio_dev->name, indio_dev->id);
> > +             if (!data->trig)
> > +                     return -ENOMEM;
> > +
> > +             data->trig->dev.parent = dev;
> > +             data->trig->ops = &sx9310_trigger_ops;
> > +             iio_trigger_set_drvdata(data->trig, indio_dev);
> > +
> > +             ret = devm_iio_trigger_register(dev, data->trig);
> > +             if (ret)
> > +                     return ret;
> > +     }
> > +
> > +     ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
> > +                                           iio_pollfunc_store_time,
> > +                                           sx9310_trigger_handler,
> > +                                           &sx9310_buffer_setup_ops);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     return devm_iio_device_register(dev, indio_dev);
> > +}
> > +
> > +static int __maybe_unused sx9310_suspend(struct device *dev)
> > +{
> > +     struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     u8 ctrl0;
> > +     int ret;
> > +
> > +     disable_irq_nosync(data->client->irq);
> > +
> > +     mutex_lock(&data->mutex);
> > +     ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
> > +                       &data->suspend_ctrl0);
> > +
> > +     if (ret)
> > +             goto out;
> > +
> > +     ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_EN_MASK;
> > +     ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
> > +     if (ret)
> > +             goto out;
> > +
> > +     ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 0);
> > +
> > +out:
> > +     mutex_unlock(&data->mutex);
> > +     return ret;
> > +}
> > +
> > +static int __maybe_unused sx9310_resume(struct device *dev)
> > +{
> > +     struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> > +     struct sx9310_data *data = iio_priv(indio_dev);
> > +     int ret;
> > +
> > +     mutex_lock(&data->mutex);
> > +     ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1);
> > +     if (ret)
> > +             goto out;
> > +
> > +     ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
> > +                        data->suspend_ctrl0);
> > +
> > +out:
> > +     mutex_unlock(&data->mutex);
> > +
> > +     enable_irq(data->client->irq);
> > +
> > +     return ret;
> > +}
> > +
> > +static const struct dev_pm_ops sx9310_pm_ops = {
> > +     SET_SYSTEM_SLEEP_PM_OPS(sx9310_suspend, sx9310_resume)
> > +};
> > +
> > +static const struct acpi_device_id sx9310_acpi_match[] = {
> > +     { "STH9310", SX9310_WHOAMI_VALUE },
> > +     { "STH9311", SX9311_WHOAMI_VALUE },
> > +     {}
> > +};
> > +MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
> > +
> > +static const struct of_device_id sx9310_of_match[] = {
> > +     { .compatible = "semtech,sx9310" },
> > +     { .compatible = "semtech,sx9311" },
> > +     {}
> > +};
> > +MODULE_DEVICE_TABLE(of, sx9310_of_match);
> > +
> > +static const struct i2c_device_id sx9310_id[] = {
> > +     { "sx9310", SX9310_WHOAMI_VALUE },
> > +     { "sx9311", SX9311_WHOAMI_VALUE },
> > +     {}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, sx9310_id);
> > +
> > +static struct i2c_driver sx9310_driver = {
> > +     .driver = {
> > +             .name   = "sx9310",
> > +             .acpi_match_table = ACPI_PTR(sx9310_acpi_match),
> > +             .of_match_table = of_match_ptr(sx9310_of_match),
>
> Seems you've missed one of Andy's comments here.  Please take
> a look at his review of v5.
>
>
> > +             .pm = &sx9310_pm_ops,
> > +     },
> > +     .probe_new      = sx9310_probe,
> > +     .id_table       = sx9310_id,
> > +};
> > +module_i2c_driver(sx9310_driver);
> > +
> > +MODULE_AUTHOR("Gwendal Grignou <gwendal@xxxxxxxxxxxx>");
> > +MODULE_AUTHOR("Daniel Campello <campello@xxxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Driver for Semtech SX9310/SX9311 proximity sensor");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.26.0.292.g33ef6b2f38-goog
> >
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux